JL Audio M8W5 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio M8W5 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Thank you for choosing a JL Audio Marine Subwoofer.
With proper installation, your new speaker
will deliver years of listening pleasure.
We strongly recommend that you have your subwoofer installed
by your authorized JL Audio dealer. The installation
professionals employed by your dealer have the necessary tools and experience to
properly install this product. If you prefer to perform
your own installation, please read this instruction manual
completely before beginning the process.
OWNER’S MANUAL
Marine Subwoofer
M8IB5 / M8W5
2 JL AUDIO M8IB5 / M8W5
INSTALLATION PROCEDURE
The diagram above shows the typical installation procedure into a fiberglass
panel using the supplied hardware (Classic Grille Model shown. Installation
is the same for Sport Grille Models). Always follow proper safety procedures
when working on a vessel. Use eye-protection at all times and a dust mask and
gloves when cutting.
1) Choose a flat mounting surface that has sufficient
depth and air space behind
it to accept the subwoofer.
2) Cut a 7.375-inch (187 mm) diameter hole.
3) Run the speaker cable to the mounting location.
4) Place the woofer in the hole and mark the screw hole locations using a sharp,
pointed tool.
5) Remove the woofer and drill a pilot hole
(see chart on next page) in each of the screw locations. It is also advisable to use
a hand-driven countersink tool on each hole to further inhibit
gel-coat cracking of fiberglass panels.
6) Connect the speaker wires and place the woofer, with its grille in place, into the
opening (for Sport Grille models, pay attention to where the logo badge will added.
7) While holding the speaker firmly in its mounting location, evenly snug the
mounting screws in a criss-cross pattern, then hand tighten in a criss-cross pattern.
Non-standard installations may require different hardware. Always use
marine-grade, stainless-steel fasteners to ensure a secure, reliable installation.
A l l s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e .
PHYSICAL SPECIFICATIONS
INCLUDED PARTS
• One Polymer Subwoofer Grille
Six #8 x 1 3/8-inch (35 mm) Phillips pan-head stainless-steel screws
Six #8 stainless-steel washers
Logo Badges (Sport-Grille Models Only)
One Pair Black (White & Titanium/Black Models)
One Pair Red (White & Titanium/Black Models)
One Pair White (White Models Only)
One Pair Titanium (Titanium/Black Models Only)
Subwoofer Physical Specifications
Nominal Diameter: 8 in / 200 mm
Frame Outer Diameter (A): 8.80 in / 224 mm
Bolt Hole Circle (B): 7.97 in / 202 mm
Motor Overmold Outer Diameter (C): 5.50 in / 140 mm
Frontal Grille Protrusion* (D): 1.45 in / 37 mm
Mounting Hole Diameter (E): 7.375 in / 187 mm
Mounting Depth (F): 5.18 in / 132 mm
Net Weight: 6.82 lbs. / 3.094 Kg
Driver Displacement: 0.032 ft / 0.91 litres
* Frontal grille protrusion measured from mounting surface.
Subwoofer Parameters M8IB5 M8W5
Free Air Resonance (Fs): 53.37 Hz 40.53 Hz
Electrical “Q” (Qes): 0.833 0.676
Mechanical “Q” (Qms): 11.827 13.110
Total Speaker Q” (Qts): 0.778 0.643
Equivalent Compliance (Vas): 0.57 ft3 / 16.00 litres 0.85 ft3 / 24.07 litres
One-way, Linear Excursion (Xmax)*: 0.53 in / 13.5 mm 0.53 in / 13.5 mm
Efficiency (1W/1m)**: 86.7 dB SPL 85.8 dB SPL
Effective Piston Area (Sd): 35.15 in / 0.0227 m 35.15 in / 0.0227 m
DC Resistance (Re): 2.958 ohm 3.147 ohm
Nominal Impedance: 4 ohm 4 ohm
Infinite Baffle Use: Yes No
Enclosure Use: Yes (Sealed & Ported) Yes (Sealed & Ported)
Power Handling (continuous): 200W 200W
* Xmax specifications are derived via one-way voice coil overhang method with no
correction factors applied.
** Efficiency (1W/1m) is an accurate indicator of a subwoofers output capability not
and should not be used as a comparison to other subwoofers to determine which
one is “louder” !
We recommend the use of this speaker in a bi-amplified system using high-quality satellite
speakers and amplifiers. We do not recommend the use of this subwoofer with a passive
crossover (coil), as this type of device will adversely affect performance.
JL AUDIO M8IB5 / M8W5 3
INTERCHANGEABLE LOGO BADGE
(Sport-Grille Models Only)
Interchangeable Logo Badges for Sport Grille
model subwoofers are included to further customize
your installation. The design of the Sport Grille allows
for the JL Audio logo to be added in your choice of
included colors and oriented in the manner that best
suits your installation.
NOTE: A left and a right badge of each color is
included. These two different orientations ensure the
JL Audio” Logo will read correctly wherever positioned
(most commonly the 3:00 or 9:00 position).
Remove the adhesive backing from the badge
and affix the badge to the grille using the small
positioning hole as a guide. See diagram at right.
! ! CAUTION ! !
While this speaker is designed to be water and
spray resistant, it is not designed to be submerged
or to withstand high-pressure water spray.
Please exercise care when washing your boat to
avoid damaging your speaker. Do not install on
submersibles, personal watercraft or any other
vessel likely to be under water at any time.
Prolonged exposure to sound pressure levels in
excess of 100dB can cause permanent hearing
loss. This high-performance speaker can exceed
this level. Please exercise restraint in its operation
in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vessel, it is
extremely important to secure it firmly. This applies
not only to the woofer itself, but also the structure
it is mounted to. If not firmly attached, the speaker
can become a dangerous projectile in a collision.
Please review the mounting information carefully
and use the supplied marine-grade hardware to
mount this product.
A l l s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e .
Fiberglass Thickness Recommended Pilot Hole Drill Size
0.125 in (3.18 mm) or less 7/64 in (2.78 mm) pilot hole
foam core / fiberglass sandwich 7/64 in (2.78 mm) pilot hole
larger than 0.125 in (3.18 mm) 1/8 in (3.18 mm) pilot hole
3:00 Position
9:00 Position
W
H
D
Subwoofer Recommended Sealed Design
Volume
(net int.) External Dimensions
( epth)Width x Height x D
F3
(Hz) Fc
(Hz) Qtc
M8IB5 1.50 f
42.5 litres 16 in x 14 in x 16.125 in
406 mm x 356 mm x 410 mm 51.53 62.62 0.9128
M8W5 1.00 f
28.3 litres 16 in x 14 in x 11.375 in
406 mm x 356 mm x 289 mm 46.51 55.13 0.8746
ENCLOSURE SPECIFICATIONS
#8 SCREW: PILOT HOLE RECOMMENDATIONS
Subwoofer Recommended Ported Design
Volume
(net int.) Enclosure External Dimensions
( epth)Width x Height x D
Round Port Specs
( nner I Diameter x Length) Tune to:
(Hz) F3
(Hz)
M8IB5 1.50 f
42.5 litres 16 in x 14 in x 17.125 in
406 mm x 356 mm x 435 mm 4 in x 12 in
102 mm x 305 mm 39 29.53
M8W5 1.25 f
35.4 litres
16 in x 14 in x 14.25 in
406 mm x 356 mm x 362 mm 3 in x 10.25 in
76 mm x 260 mm 35 31.51
L
ID
W
H
D
Sealed Design Ported Design
NOTE: The enclosure recommendations listed are
external dimensions which assume the use of 3/4"
(19mm) thick material. If you are using 5/8" (16mm)
thick material, subtract 1/4" (6.5mm) from each
dimension. Do not use any material with a thickness
of less than 5/8" (16mm) as this may compromise the
rigidity of the enclosure.
NOTE: All enclosure volumes listed are net
internal volumes! Box volume displacement, port
displacement and brace displacement must be
added to obtain the final gross internal volume. All
enclosure dimensions listed have already taken this
into account.


Product specificaties

Merk: JL Audio
Categorie: Subwoofer
Model: M8W5

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio M8W5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer JL Audio

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer