JL Audio 12W7AE Handleiding

JL Audio Subwoofer 12W7AE

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio 12W7AE (16 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
W7AE Owner’s Manual
P R E C I S I O N - B U I L T I N U . S . A .
YELLOW OPTIMUM:
This zone represents the best balance
between long-term reliability, high
output and low distortion performance.
In this zone, you will be taking full
advantage of the woofer's optimum,
low-distortion performance range
without undue risk of failure.
RED MAXIMUM:
In this zone, low-distortion output and
long-term reliability will be compromised
(especially by an aggressive user). Slightly
more SPL will be gained by pushing the
power into this zone, but typically not
more than 2dB, compared to the yellow
zone. The closer you are to the black
zone, the higher the likelihood of driver
failure. Operate with caution.
BLACK WARRANTY VOID:
We do not recommend operating
woofers at this level of power. In this
zone, there is a very high probability that
the driver will fail due to excessive heat
and/or mechanical stress.
Subwoofer drivers operated at
these levels of power are NOT covered
under warranty.
GREEN MINIMUM:
From a reliability standpoint, this zone
represents a very comfortable operating
power range for each driver. This level
of power will not stress the woofer but
will not extract all of its performance
potential, either.
Use of less than the minimum power
level will not damage the woofer, but may
result in unsatisfactory performance.
An Introduction
When designing systems with W7AE drivers, it is very important to achieve a good power match between the subwoofer amplifier and the subwoofer driver's capabilities. The power levels listed in the
above chart represent continuous (RMS) amplifier power per woofer and assume that the user will regularly make full use of that power without drastically overdriving (clipping) the amplifier(s). Make
sure you factor system impedance and the total number of subwoofers into your calculations. Adhering to these power recommendations will result in systems that are both reliable and enjoyable.
RECOMMENDED CONTINUOUSRMS POWER RANGE FOR SUBWOOFER DRIVER:ONE
Please consult the input sensitivity setting information on page 14 of this book.
250W 500W 1000W 2000W 4000W125W
13W7AE
12W7AE
10W7AE
8W7AE
Thank you for purchasing a JLAudio W7AE subwoofer driver. The
W7AE embodies JLAudio’s commitment to pushing the envelope
of speaker technology, with eight patented technologies, a design
patent and a completely unique set of component parts. Each
W7AE model has been meticulously engineered to reproduce
sub-bass with extreme fidelity at any volume level, provided it
is installed and tuned properly. Please review the information in
this document carefully so as to maximize your enjoyment of the
W7AE’s capabilities.
Two enclosure recommendations are listed for each model,
one sealed and one ported. In most cases, the sealed enclosure
design will give you the best overall sound quality and take up the
least space in your vehicle. The ported enclosure design will deliver
additional output over the sealed enclosure (about 3 - 4 dB more)
and will also maintain excellent sound quality, but it will require
significantly more space to install. The recommended ported
enclosure is not designed for peaky “competition SPL” performance,
but rather for music listening. It will be very loud and sound
extremely good when set up properly.
In addition to the enclosure recommendations, we also
provide recommended amplifier settings for JL Audio amplifiers
commonly used with W7AE’s. Some of this information is also
applicable with other brands of amplifiers (like crossover points
and slopes), some is not (like the voltage levels specified for input
sensitivity settings). Please note that W7AE’s rarely require any
equalization to produce smooth frequency response. If you have
an equalizer in your system (or one is included in your head unit
or amplifier), defeat all bands below 125 Hz before dialing in your
new system settings.
For optimum sub-bass performance, the amplifier input
sensitivity must be adjusted to avoid excessive distortion (clipping)
of the amplifier output. Overly high input sensitivity settings
result in no additional clean output but will result in poor sound
quality and reduced speaker reliability. With W7AE subwoofers,
a clipped amplifier output may manifest itself audibly as a low-
level “mechanical” sound coming from the speakers. Proper input
sensitivity setting will avoid this problem.
2
PRECISION
BUILT
IN U.S.A.
W7AE Subwoofer Drivers: Tight.
The ultimate no-compromise subwoofer for those seeking extreme output and sublime sound quality.
1 - OverRoll™ Surround
(U.S. Patent #5,687,247 and #5,949,898)
By utilizing space wasted in conventional
speakers, this ground-breaking innovation controls
the W7AE’s massive excursion without sacrificing
precious cone area.
2 - W-Cone™ (U.S. Patent #6,496,590)
The W-Cone™ is a unit-body cone assembly that
delivers astonishing cone stiffness with minimal
mass. The shape also provides incredible torsional
rigidity, which is critical to maintaining voice coil
alignment at the suspension limits.
3 - Floating-Cone™ Attach Method
(U.S. Patent #6,501,844)
Our newly conceived assembly technique ensures
proper surround geometry in the assembled
speaker for better excursion control and dynamic
voice coil alignment. A small detail that means
a lot when you’re pumping the cone to the
excursion extremes the W7AE is capable of.
4 - Plateau-Reinforced Spider Attachment
(U.S. Patent #6,118,884)
A derivative of JLAudio’s famous VRC technology,
this bulletproof suspension attachment relieves
stress from the spider material at high-excursions
for enhanced reliability.
5 - Radially Cross-Drilled Pole Piece
(U.S. Patent #6,243,479)
This innovative venting system greatly enhances
thermal dissipation and power handling by
directing air flow onto the voice coil former,
working in conjunction with technology #6.
6 - Elevated Frame Cooling (U.S. Patent
#D472,891, #6,219,431 and #6,229,902)
The elevated frame design of the W7AE delivers
cool air through slots directly above the top-plate
to the voice coil of the speaker. This not only
enhances power handling, but also sound quality
by minimizing dynamic parameter shifts and
power compression.
In addition to the patented technologies listed above, multiple U.S. and International patents are currently pending.
WARNING: Prolonged exposure to high sound pressure levels can lead to permanent hearing loss.
W7AE subwoofers are capable of reproducing sound at extremely high sound pressure levels. Please exercise restraint in the operation of your system
in order to preserve your hearing and your long-term enjoyment of this product’s sound quality capabilities.
7 - Highly Linear, DMA-Optimized Motor System
DMA is JLAudio’s proprietary Dynamic Motor
Analysis system and is aimed at improving
dynamic motor behavior. As a result of DMA
optimization, W7AE motors remain linear in motor
force over an extreme range of excursion and also
maintain a highly stable fixed magnetic field in
the gap over a wide power range. This leads to
vastly reduced distortion and faithfully reproduced
transients... or put simply: tight, clean, articulate
bass.
8 - Huge Diameter, Progressive-Roll Spider
Arrived at after intense computer analysis and
optimization, the W7AE spiders provide precise
control and motor/voice coil alignment without
prematurely limiting excursion.
9 - Co-Extruded Double Lead-Wires
The extruded casing and carefully engineered
attachments ensure controlled lead-wire behavior
under the most extreme excursion demands. Two
conductors are used per connection for ample
current carrying capability.
10 - Ultra-long Voice Coil
To allow extreme linear excursion, phenomenal
power handling and control, control, control.
3

Product specificaties

Merk: JL Audio
Categorie: Subwoofer
Model: 12W7AE

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio 12W7AE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer JL Audio

JL Audio

JL Audio Stealthbox SB-GM-ESC/10W1v3/TN Handleiding

7 December 2024
JL Audio

JL Audio Stealthbox SB-GM-CTRIP/10TW3/UF Handleiding

7 December 2024
JL Audio

JL Audio Stealthbox SB-N-370/10W3v3 Handleiding

7 December 2024
JL Audio

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/GA Handleiding

15 November 2024
JL Audio

JL Audio Stealthbox SB-F-MUCUPE2/13W3v3 Handleiding

15 November 2024
JL Audio

JL Audio Stealthbox SB-GM-SLVCRW/10TW3 Handleiding

15 November 2024
JL Audio

JL Audio Stealthbox SB-T-TACDC12/10TW3 Handleiding

15 November 2024
JL Audio

JL Audio StowAway PES112-TW1 Handleiding

11 Juni 2024
JL Audio

JL Audio Fathom CTS-113-ST575-13TW5H Handleiding

10 Juni 2024
JL Audio

JL Audio Fathom CTS-213-TD900-13TW5H Handleiding

10 Juni 2024

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Origin Acoustics

Origin Acoustics SUBV8P Handleiding

28 December 2024
Origin Acoustics

Origin Acoustics OSUB10 Handleiding

28 December 2024
Origin Acoustics

Origin Acoustics SUBV12P Handleiding

28 December 2024
Origin Acoustics

Origin Acoustics SUBDD12 Handleiding

28 December 2024
Origin Acoustics

Origin Acoustics OSUB12 Handleiding

28 December 2024
Origin Acoustics

Origin Acoustics OSUB8 Handleiding

28 December 2024
Adam

Adam Sub12 Handleiding

23 December 2024
Adam

Adam Sub10 MK2 Handleiding

23 December 2024
Adam

Adam Sub8 Handleiding

23 December 2024
Adam

Adam Sub7 Handleiding

23 December 2024