JL Audio 10W1v3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio 10W1v3 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
10W1v3-2 / 10W1v3-4 Subwoofer Driver
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer
is a precision loudspeaker which has been engineered to produce the highest quality sub-bass
performance in your vehicle. Authorized JL Audio dealers have extensive technical information
for many different applications of your new speaker. They also have the knowledge, skills and tools
to build a high-quality enclosure that will maximize the performance of your speaker. We highly
recommend that you have your enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a
sealed enclosure, the other is a ported design. Both types of enclosures will give you excellent sound
quality and low-frequency extension. The sealed enclosure is a better choice if space is extremely
tight, but the ported enclosure will produce 3dB more output at the same power if you have the
extra space to work with.
OWNER’S MANUAL
2 JL AUDIO 10W1v3-2/10W1v3-4
SUBWOOFER 10W1v3-2 10W1v3-4
Free Air Resonance (Fs): 25.23 Hz 26.15 Hz
Electrical “Q” (Qes): 0.463 0.475
Mechanical “Q” (Qms): 7.246 7.243
Total Speaker “Q” 0.436 0.446(Qts):
Equivalent Compliance (Vas): 1.559 ft3
44.15 litres
1.533 ft3
43.41 litres
One-way, Linear Excursion (Xmax)*: 0.45 in
11.4 mm
0.45 in
11.4 mm
Efficiency (1W/1m)**: 83.9 dB SPL 84.2 dB SPL
Effective Piston Area (Sd): 53.584 in2
0.0346 m2
53.584 in2
0.0346 m2
DC Resistance (Re): 2.233 ohm 3.902 ohm
Nominal Impedance: 2 ohm 4 ohm
Power Handling (continuous): 300W 300W
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to
other subwoofers to determine which one is “louder” !
A
C
D
B
E
10W1v3 SUBWOOFER PHYSICAL
SPECIFICATIONS
Nominal Diameter: 10.0 in
250 mm
Overall Diameter (A): 10.5 in
267 mm
Mounting Hole Diameter (B): 9.0625 in
230 mm
Bolt Hole Circle (C): 9.7 in
246 mm
Magnet Diameter (D): 4.92 in
125 mm
Mounting Depth (E): 4.60 in
117 mm
Net Weight: 9.9 lbs
4.5 kg
Driver Displacement: 0.037 ft3
1.05 liters
JL AUDIO 10W1v3-2 / 10W1v3-4
U.S. PATENTS: #5,734,734 #6,501,844 #6,219,431 #D480,709 Other U.S. & Foreign patents pending.
All specifications are subject to change without notice.
D
H
W
H
D
W
SH
SW
SW
EL
SL
“EL (Port Extension Length):
10W1v3: 12.50 in. (318 mm)
JL AUDIO 10W1v 3-2/10W1v3-4 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURES
Volume
(net int.)
External Dimensions
( epth)Width x Height x D
F3
(Hz)
Fc
(Hz) Qtc
10W1v3-2 0.55 ft
15.57 liters
16.5 in. x 13.5 in. x 7 in.
419 mm x 343 mm x 178 mm 42.3 49.4 0.853
10W1v3-4 0.55 ft
15.57 liters
16.5 in. x 13.5 in. x 7 in.
419 mm x 343 mm x 178 mm 43.1 50.9 0.868
All specifications are subject to change without notice.
SUBWOOFER RECOMMENDED PORTED ENCLOSURES
Volume
(net int.)
Enclosure External Dimensions
( epth)Width x Height x D
Slot Port Internal Dimensions
( lot lot lot ength)S Width x S Height x S L
Tune to:
(Hz)
F3
(Hz)
10W1v3-2 0.9 ft
25.5 liters
17 in. x 11.5 in. x 15.25 in.
432 mm x 292 mm x 387 mm
1.125 in. x 10 in. x 30.1875 in.
29 mm x 254 mm x 767 mm 32.17 31.36
10W1v3-4 0.9 ft
25.5 liters
17 in. x 11.5 in. x 15.25 in.
432 mm x 292 mm x 387 mm
1.125 in. x 10 in. x 30.1875 in.
29 mm x 254 mm x 767 mm 32.17 31.92
! ! CAUTION ! !
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using thick 5/8" (16mm)
material, subtract from each dimension. 1/4" (6.5mm)
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
All enclosure volumes listed are net internal volumes!
Box volume displacement, port displacement and
brace displacement must be added to obtain the final
gross internal volume. All enclosure dimensions listed
have already taken this into account.
When using two subwoofers in a common
enclosure simply the required volume and, double
in the case of a ported enclosure, use the two times
recommended port(s).
We recommend the use of this speaker in a
bi-amplified system using high-quality satellite
speakers and amplifiers. We do not recommend
the use of this subwoofer with a passive crossover
(coil), as this type of device will adversely affect
performance.
All specifications are subject to change without notice.


Product specificaties

Merk: JL Audio
Categorie: Subwoofer
Model: 10W1v3

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio 10W1v3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer JL Audio

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer