JL Audio 10W0v3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio 10W0v3 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
10WØv3-4
Subwoofers
o w n e r s m a n u a l
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance
in your vehicle. Authorized JL Audio dealers have extensive technical information for many different
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality
enclosure that will maximize the performance of your speaker. We highly recommend that you have your
enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported
enclosure will produce 3dB more output at the same power if you have the extra space to work with.
2 JL AUDIO 10WØv3-4
SUBWOOFER 10WØv3-4
Free Air Resonance (Fs): 32.09 Hz
Electrical “Q” (Qes): 0.640
Mechanical “Q” (Qms): 10.752
Total Speaker “Q” 0.604(Qts):
Equivalent Compliance (Vas): 1.095 ft3
31.01 liters
One-way, Linear Excursion (Xmax)*: 0.45 in.
11.4 mm
Efficiency (1W/1m)**: 84.07 dB SPL
Effective Piston Area (Sd): 48.909 in2
0.0316 m2
DC Resistance (Re): 4.280 ohm
Nominal Impedance: 4 ohm
Power Handling (continuous): 300 W
* Xmax specifications are derived via one-way voice coil overhang method
with no correction factors applied.
** Efficiency (1W/1m) is an accurate indicator of a subwoofer’s output not
capability and should not be used as a comparison to other subwoofers
to determine which one is “louder !
A
BE
D
C
10WØv3 SUBWOOFER
PHYSICAL SPECIFICATIONS
Nominal Diameter: 10.0 in.
250 mm
Overall Diameter (A): 10.52 in.
267 mm
Mounting Hole Diameter (B): 9.0625 in.
230 mm
Bolt Hole Circle (C): 9.7 in.
246.5 mm
Magnet Diameter (D): 5.05 in
128 mm
Mounting Depth (E): 4.9 in.
124 mm
Net Weight: 7.5 lbs.
3.40 kg
Driver Displacement: 0.034 ft3
0.96 liters
JL AUDIO 10WØv3-4
U.S. PATENT: #6,219,431
“EL (Port Extension Length):
10WØv3: 18.25 in. (464 mm)
JL AUDIO 10WØv3-4 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURE
Volume
(net int.)
External Dimensions
( epth)Width x Height x D
F3
(Hz)
Fc
(Hz) Qtc
10WØv3-4 0.65 ft3
18.41 liters
18 in. x 11 in. x 9 in.
457 mm x 279 mm x 229 mm 42.4 53.23 1.002
All specifications are subject to change without notice.
SUBWOOFER RECOMMENDED PORTED ENCLOSURE
Volume
(net int.)
Enclosure External Dimensions
( epth)Width x Height x D
Slot Port Internal Dimensions
( lot lot lot ength)S Width x S Height x S L
Tune to:
(Hz)
F3
(Hz)
10WØv3-4 1.125 ft3
31.86 liters
23 in. x 12 in. x 13.625 in.
584 mm x 305 mm x 346 mm
1.25 in. x 10.5 in. x 32 in.
31.75 mm x 267 mm x 813 mm 30 29.6
! ! CAUTION ! !
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using thick 5/8" (16mm)
material, subtract from each dimension. 1/4" (6.5mm)
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
All enclosure volumes listed are net internal
volumes! Box volume displacement, port
displacement and brace displacement must be
added to obtain the final gross internal volume. All
enclosure dimensions listed have already taken this
into account.
When using subwoofers in a common two
enclosure simply the required volume and, double
in the case of a ported enclosure, use two times the
recommended port(s).
We recommend the use of this speaker in a bi-amplified
system using high-quality satellite speakers and
amplifiers. We do not recommend the use of this
subwoofer with a passive crossover (coil), as this type of
device will adversely affect performance.


Product specificaties

Merk: JL Audio
Categorie: Subwoofer
Model: 10W0v3

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio 10W0v3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer JL Audio

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer