Jilong JL027293N Handleiding

Jilong luchtbed JL027293N

Lees hieronder de 📖 handleiding in het Nederlandse voor Jilong JL027293N (21 pagina's) in de categorie luchtbed. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

Important Safety Guideline

Please read, understand and follow all instructions prior to using.

To enhance the enjoyment of your Air Bed and protect the safety of the operator

using the product, ALWAYS STRICTLY OBSERVE the following important

safety points. The following important points should be read and underst d an

before using this product:

1. WARNING: Only for indoor household use. Keep away from ﬁre.

2. RISK OF COMBUSTION: Do not place the airbed against or near any

open ﬂames, heaters, furnaces or other hot objects.

3. WARNING: Do not obstruct the air passage opening or insert any objects

into the opening at any time.

4. WARNING: Do not stand, jump or use the airbed as a trampoline. Always

supervise children near the Airbed.

5. WARNING: This product is not a raft or ﬂoatation device. Do not use near

or on water.

6. WARNING: Children must not be left unattended when using the Airbed.

Use only under adult competent supervision.

7. WARNING: Keep pets away from the Airbed. Pets may tear or puncture the

airbed.

8. : Make sure the area is ﬂat, smooth, even and free of sharp IMPORTANT

objects that can puncture the airbed. Do not set up the Airbed near to stairs,

doors, drops, sharp edges or breakables.

9. : To minimize any chance of rolling, tipping or swaying, IMPORTANT

avoid sleeping on the edge of the airbed. Edges provide less support than the

middle of the Airbed.

10. hildren should be supervised to ensure that they do not IMPORTANT: C

play with the appliance.

11. WARNING: The storage bag (if included) is not a toy. To avoid danger of

suﬀocation, keep the airbed storage bag or any other bags away from babies

and hildren. Fold up the bag and store away from children when not in use. c

Airbed Instruction Manual

BAB- -E 12

Inﬂation

1. Unfold your product and lay ﬂat. Make sure the ﬂocked side is upturned

during the inflation.

2. You can use foot or hand pump ( ) to inﬂate the airbed. not including

TIP: How to use the 2- -1 inﬂatable valve in

 Pull out the base valve from the main chamber, open the top stopper of

the valve See . （ A）

 Insert the inﬂation hose and inﬂate the chamber（）See B. Once inﬂation is

ﬁnished, insert the top stopper to the base valve See （C）.

WARNING: Do not use air compressor or high pressure pumps. Do

not over inﬂate: excessive inﬂation of the air chambers can cause the

chamber to burst or cause damage to the welding seams.

Deﬂation

Pull out the base valve from the bed ( ), open the cover ( ) and take out C B

the stopper to release air ( not to puncture your Airbed. Do not force A). Do

air out of the Airbed. Allow air to escape slowly and naturally. Fold

carefully and re-insert into the package. See below illustration!

Storage and Maintain

1) Clean the product with clear water, then leave it in shady and cool place for

airing, fold it into original package and place it indoor for next use. Caution:

Do not use the alkali or acid detergent to clean product! Do not leave product

exposed under sunlight directly because it will shorten the using-life of

product.

2) Fold the airbed loosely and avoid sharp bends, corners and creases which can

damage the airbed.

3) No speciﬁc maintenance is required for electric pump.

4) Place the airbed inside the storage bag and store in a dry and room

temperature location indoors. not store in an area where it is likely to be Do

exposed to extreme temperature.

Repair Patch Instructions

Small pinhole and small puncture leaks can be repaired with the included repair patch

a) Locate the leak place.

b) Deﬂate and drain the water.

c) Clean the area surrounding the leak wipe up all water from the surface. age and

d) Take out the repair patch, cut it in required shape and size, which should be litter to

larger than the leaking area, put the patch on leaking area and press ﬁrmly.

e) You can use it again after 24 hours drying of the repaired position.

If the damage is bigger than 1 (2.5cm), we recommend using a Silicone or rubber ”

based glue for repair. Please read warning statement on glue prior to use.

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: +86-21-58942200 E-mail: info@jilong.com Web: www.jilong.com

Product specificaties

Merk:	Jilong
Categorie:	luchtbed
Model:	JL027293N
Kleur van het product:	Blauw
Breedte:	730 mm
Hoogte:	220 mm
Gewicht verpakking:	1650 g
Breedte verpakking:	430 mm
Diepte verpakking:	360 mm
Hoogte verpakking:	350 mm
Soort:	Eenpersoons matras
Type verpakking:	Doos
Materiaal:	Vinyl
Lengte:	2030 mm
Inklapbaar:	Ja
Gebruikstijd:	3 min
Aanbevolen leeftijdscategorie:	Volwassenen
Producten per pallet:	180 stuk(s)
Verpakkingsvolume:	45000 cm³
Ingebouwde luchtpomp:	Nee
Intrastatcode:	39269092
Minimum bestelhoeveelheid:	6 stuk(s)
Aantal kamers:	1
Zachte toplaag:	Ja
Inclusief reparatieset:	Ja