JDC Skywatch Wind Handleiding

JDC Niet gecategoriseerd Skywatch Wind

Lees hieronder de 📖 handleiding in het Nederlandse voor JDC Skywatch Wind (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 112 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
© V 1 - - JDC Electronic SA, all rights reserved. 1. , 22 Jun 2022
USER GUIDE
GETTING STARTED
GETTING STARTED
GETTING STARTED
GETTING STARTEDGETTING STARTED
Thank you for purchasing this Swiss- -designed and Swiss
manufactured wind instrument. To obtain the best results,
please read the instructions and follow the usage precautions.
This instrument is designed as an aid to users who are in an
open air- environment, but IT CANNOT replace advice and
warnings from the local weather station.
Open-air climatic conditions can sometimes change quite
dramatically, and this can happen very quickly indeed. Sunny
weather can, for example, change to thunderstorm conditions
in the space of half an hour and sometimes less. You should
therefore always follow basic safety rules whenever you
undertake open air activity.
SKYWATCH WIND
SKYWATCH WIND
SKYWATCH WIND
SKYWATCH WINDSKYWATCH WIND
KEY FEATURES
KEY FEATURES
KEY FEATURES
KEY FEATURESKEY FEATURES
SWITCHING
SWITCHING
SWITCHING
SWITCHINGSWITCHING
ON
ON
ON
ONON
To switch on the SKYWATCH® Wind press briefly on the
button. The instrument switches on and displays the software
version after which the instrument enters the last mode
displayed before the instrument was switched off -(for first
time use this defaults to actual and maximum wind speed.
SWITCHING OFF
SWITCHING OFF
SWITCHING OFF
SWITCHING OFFSWITCHING OFF
Switching - off automatically (Auto off)
T he SKYWATCH® Wind switches off automatically one minute
after -either the button was last pressed or after the last non
zero wind speed measurement.
Switching off manually
To switch the SKYWATCH® Wind off manually (valid in every
mode), hold the button depressed until the display flashes
briefly and it switches off, then release.
DISPLAY
DISPLAY
DISPLAY
DISPLAY DISPLAY MODES
MODES
MODES
MODESMODES
Momentary pressure on the button allows you to move
between the display modes
Modes
1. W ind + maximum wind speed
2. Wind + lifetime maximum wind speed
3. Wind + temperature
4. Wind + wind chill (perceived temperature)
Symbol key
Wind chill Maximum wind Lifetime wind
ME
ME
ME
MEMEASUREMENT
ASUREMENT
ASUREMENT
ASUREMENTASUREMENT
Selection of wind units (modes 1 & 2)
S witch between units by repeated longer button presses
whilst observing the LCD display: km/h ( kilometers per hour),
mph (miles per hour) (nautical miles per hour) and knots m/s
( meters per second). When the unit of choice appears, release
the . button
Selection of temperature units (modes 3 & 4)
Switch between units by repeated longer button presses
whilst observing the LCD display: °C or °F. When the unit of
choice appears, release the . button
Wind speed
Maximum -wind speed is measured since the last power on;
Lifetime maximum wind speed is measured since the last
manual reset (holding the power button for longer than two
seconds resets it to zero). For the measurement to be as exact
as possible align the instrument along the axis of the wind.
Temperature
sensor
Wind impeller
Beaufort
scale
Wind
units
Temperature
units
On/Off
Mode select
Lanyard
© 1 - - JDC Electronic SA, all rights reserved. V1. , 22 Jun 2022
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
Wind
Units of measurement
Resolution
Precision
Measuring range
Measurement cycle
Temperature
Units
Resolution
Measurement cycle
Precision
Measuring range
BATTERY
BATTERY
BATTERY
BATTERYBATTERY
Your SKYWATCH® Wind is powered by a factory fitted - 3V
lithium battery . designed for at least 250,000 measurements
Please ensure that the unit is correctly recycled in accordance
with the applicable regulations.
MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCEMAINTENANCE
The design and manufacture of this instrument have been the
subject of a great deal of care. To make best use of the
proposed functions you are advised to use the instrument in
accordance with the following observations:
• Avoid at all costs items such as hair, thread, sand or other
dust materials getting into the impeller, as they could cause
defective rotation of the impeller and therefore a loss of
precision. If a hair or a piece of thread should manage to get
into the impeller, extract it gently using tweezers; in the
case of dust or sand, you can run clean water over the
impeller.
• Avoid touching the temperature sensor.
• Avoid exposing the instrument to extreme climatic
conditions for over-long periods. While it uses components
resistant to such temperatures, we recommend that you do
not expose your instrument to strong sources of heat, for
example under the windscreen of a vehicle.
• Avoid careless use or sharp impacts.
• DO NOT EXPOSE the instrument to powerful chemicals.
Such products could damage it.
JDC ELECTRONIC SA
Avenue des Sports 42
1400 Yverdon- - Les Bains
Switzerland
info@jdc.ch www.jdc.ch
IMPELLER REPLACEMENT
IMPELLER REPLACEMENT
IMPELLER REPLACEMENT
IMPELLER REPLACEMENTIMPELLER REPLACEMENT
To replace the impeller gently remove the rear support using
a pair of fine pliers. Insert the new impeller so the magnet is
facing to the rear of the unit. Gently press the rear support
back into place. Avoid touching the sharp impeller shaft.
DISCLAIMER
DISCLAIMER
DISCLAIMER
DISCLAIMERDISCLAIMER
JDC ELECTRONIC SA will in no way be held responsible for any
consequences, direct or indirect, or for any prejudice, which
might result from the use of this instrument.
IMPORTANT DISPOSAL INFORMATION
IMPORTANT DISPOSAL INFORMATION
IMPORTANT DISPOSAL INFORMATION
IMPORTANT DISPOSAL INFORMATIONIMPORTANT DISPOSAL INFORMATION
The article, its packaging and the battery supplied have been
manufactured from valuable materials that can be recycled.
Recycling reduces the amount of refuse and helps to preserve
the environment.
Dispose of the packaging at a recycling point which sorts
materials by type. Make use of the local facilities provided for
collecting paper, cardboard and lightweight packaging by
type.
Devices, marked with this symbol must not be disposed
of along with household refuse! You are legally bound
to dispose of old devices separately from household
refuse.
Information about collection points where old devices
can be disposed of free of charge is available from your
local authorities.
Batteries must not be disposed of along with
household refuse!
You are legally bound to dispose of spent batteries and
rechargeable batteries at a local authority collection
point or return them to a battery retailer.
Batteries marked with these letters contain among
others the following harmful substances:
Pb=lead, Cd=cadmium, Hg=mercury.
Rear support
Front support
Impeller
Magnet

Product specificaties

Merk: JDC
Categorie: Niet gecategoriseerd
Model: Skywatch Wind

Heb je hulp nodig?

Als je hulp nodig hebt met JDC Skywatch Wind stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd JDC

JDC

JDC Skywatch Atmos Handleiding

23 Juni 2023
JDC

JDC Skywatch Xplorer 1 Handleiding

21 Juni 2023
JDC

JDC Skywatch Eole Handleiding

20 Juni 2023
JDC

JDC Skywatch Wind Handleiding

18 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-HTSS Handleiding

21 December 2024