Irritrol 2507DK-MF Handleiding

Irritrol Niet gecategoriseerd 2507DK-MF

Lees hieronder de 📖 handleiding in het Nederlandse voor Irritrol 2507DK-MF (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

Drip Zone Valve Kits

Installation Instructions

Click on the links to view the documents.

Drip Zone Valve Kit

Models 2500DK-1-LF and 2500DK-1-MF

Installation Instructions

373-0512 Revision B

Drip Zone Valve Kit

Models 2711APRDK-LF and 2711APRDK-MF

Installation Instructions

373-0513 Revision B

Drip Zone Valve Kit

Models 2713APRDK-LF and 2713APRDK-MF

Installation Instructions

373-0514 Revision B

Drip Zone Valve Kit

Models 700DK-075-LF

Installation Instructions

373-0515 Revision B

Drip Zone Valve Kit

Models 700DK-1-LF and 700DK-1-MF

Installation Instructions

373-0516 Revision B

Drip Zone Kit - Less Valve

Models DK-LV-LF and DK-LV-MF

Installation Instructions

373-0535 Revision A

Get more doneTM

Drip Zone Valve Kit

Models 2500DK-1-LF and 2500DK-1-MF

Installation Instructions

Kit Components

• Irritrol 2500 Series Valve, Model 2500TF

• Pressure Regulator - 25 psi at 0.1–8 GPM,

3/4" Female NPT (Low Flow [LF] model)

• Pressure Regulator - 25 psi at 2–20 GPM,

3/4" Female NPT (Medium Flow [MF] model)

• 3/4" MPT x MPT F Series Y-ﬁlter, 150 Mesh Screen

• Drip Line Compression Adapter, CA-710

• 1" x 3/4" Male NPT Reducer Bushing

• 3/4" MPT x 1/2" Slip Fitting

Speciﬁcations

• Downstream Pressure Regulation: 25 psi

• Flow Rate at 25 psi: (LF Model) 0.1–8 GPM

(MF Model) 2–20 GPM

• Filtration: 150 Mesh Stainless Steel Screen

• 1" In-line Electric Control Valve, Model 2500TF

Operating Pressure: 10–150 psis

24 VAC, 50/60 Hz Solenoids

Inrush: 0.40 amp, 9.6 VA s

Holding: 0.20 amp, 4.8 VA s

Manual On/Off - Internal and External Bleeds

Adjustable Flow Controls

Installation Procedure

CAUTION: When assembling the drip zone valve kit components, use just 1 ½ to 2 turns of PTFE tape on male

threads. Never use pipe dope. To achieve a leak-free thread connection, turn the male ﬁtting until it is ﬁnger-

tight, and then add one or two more turns. Over-tightening can cause splitting and failure of the female threads.

Important: Ensure the Y-ﬁlter, control valve and pressure regulator are installed in the correct ﬂow

orientation. Flow direction arrows are provided on each component. Refer to Figure 1.

1. Thread the Y-ﬁlter inlet into the valve outlet with

the provided 1" x 3/4" NPT reducer bushing. Use

PTFE tape on all threaded connections. Angle the

Y-ﬁlter slightly downward as shown in Figure 1.

2. Thread the pressure regulator inlet into the Y-ﬁlter

outlet.

3. Connect the water source supply line and piping

to drip emitters.

NOTE: Installing the valve assembly below grade

in a valve box is recommended for protection and

ease of service.

NOTE: Refer to the 2500TF Series Valve

Instruction Guide provided in the kit for complete

valve installation and operation information.

NOTE: To adapt the Drip Zone Valve Kit for

dripline applications, install the provided 3/4" MPT

x 1/2" Slip ﬁtting and CA-710 dripline compression

adapter to the pressure regulator outlet.

4. Flush the system to remove debris.

5. To determine the recommended minimum/

maximum number of drip emitters per control

valve, refer to the table below.

2500TF Series Valve

Valve Box

Reducer

Bushing

Y-ﬁlter

Pressure

Regulator

3/4" MPT x

1/2" Slip

Compression Adapter

(Use with Flex Tube only)

To Emitters From Source

Figure 1

Table 1

Back to Menu

Get more doneTM

Drip Zone Valve Kit

Models 2711APRDK-LF and 2711APRDK-MF

Installation Instructions

Kit Components

• Irritrol 2700 Series Valve, Model 2711APR

• Pressure Regulator - 25 psi at 0.1–8 GPM,

3/4" Female NPT (Low Flow [LF] model)

• Pressure Regulator - 25 psi at 2–20 GPM,

3/4" Female NPT (Medium Flow [MF] model)

• 3/4" MPT x MPT F Series Y-ﬁlter, 150 Mesh Screen

• Drip Line Compression Adapter, CA-710

• 3/4" MPT x 1/2" Slip Fitting

Speciﬁcations

• Downstream Pressure Regulation: 25 psi

• Flow Rate at 25 psi: (LF Model) 0.1–8 GPM

(MF Model) 2–20 GPM

• Filtration: 150 Mesh Stainless Steel Screen

• 3/4" Anti-siphon Electric Control Valve, Model 2711APR

Operating Pressure: 10–150 psis

24 VAC, 50/60 Hz Solenoids

Inrush: 0.40 amp, 9.6 VA s

Holding: 0.20 amp, 4.8 VA s

Manual On/Off - Internal and External Bleeds

Adjustable Flow Controls

Installation Procedure

CAUTION: When assembling the drip zone valve kit components, use just 1 ½ to 2 turns of PTFE tape on male

threads. Never use pipe dope. To achieve a leak-free thread connection, turn the male ﬁtting until it is ﬁnger-

tight, and then add one or two more turns. Over-tightening can cause splitting and failure of the female threads.

Important: Ensure the Y-ﬁlter, control valve and pressure regulator are installed in the correct ﬂow

orientation. Flow direction arrows are provided on each component. Refer to Figure 1.

1. Thread the Y-ﬁlter inlet into the valve outlet. Use

PTFE tape on all threaded connections. Angle the

Y-ﬁlter slightly downward as shown in Figure 1.

2. Thread the pressure regulator inlet into the Y-ﬁlter

outlet.

3. Connect the water source supply line and piping

to drip emitters.

NOTE: Refer to the 2711APR Series Valve

Instruction Guide provided in the kit for complete

valve installation and operation information.

NOTE: To adapt the Drip Zone Valve Kit for

dripline applications, install the provided 3/4" MPT

x 1/2" Slip ﬁtting and CA-710 dripline compression

adapter to the pressure regulator outlet.

4. Flush the system to remove debris.

5. To determine the recommended minimum/

maximum number of drip emitters per control

valve, refer to the table below.

2711APR

Valve

NOTE: The valve must be

installed at least 6" above the

highest emitter it controls.

Y-ﬁlter

Pressure

Regulator

3/4" MPT x 1/2" Slip

Compression Adapter

(Use with Flex Tube only)

To Emitters

From Source

Figure 1

Table 1

Back to Menu

Product specificaties

Merk:	Irritrol
Categorie:	Niet gecategoriseerd
Model:	2507DK-MF

Heb je hulp nodig?

Als je hulp nodig hebt met Irritrol 2507DK-MF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Irritrol

Irritrol CL-100- Handleiding

23 Mei 2023

Irritrol 100P3-S Handleiding

23 Mei 2023

Irritrol 102P3N Handleiding

11 Mei 2023

Irritrol 100P1.5 Handleiding

5 Mei 2023

Irritrol Titan Handleiding

30 April 2023

Irritrol CL-R1 Handleiding

28 April 2023

Irritrol 102P1.5 Handleiding

27 April 2023

Irritrol 2711APRDK-MF Handleiding

26 April 2023

Irritrol DK-LV-MF Handleiding

24 April 2023

Irritrol RS500 Handleiding

24 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux IAN 071407 Handleiding

29 November 2024

Livarno Lux IAN 317128 Handleiding

29 November 2024

Livarno Lux IAN 049213 Handleiding

29 November 2024

Livarno Lux ST-1002 Handleiding

29 November 2024

Livarno Lux HG02489 Handleiding

29 November 2024

Livarno Lux HG02189 Handleiding

29 November 2024

Livarno Lux IAN 365198 Handleiding

29 November 2024

Livarno Lux IAN 367074 Handleiding

29 November 2024

Livarno Lux HG00701 Handleiding

29 November 2024

Livarno Lux IAN 337273 Handleiding

29 November 2024