Ipevo Uplift Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Ipevo Uplift (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Quick Start Guide
IPEVO Uplift
Multi- ngle Arm for Smartphones A
Copyright© 2020 IPEVO Corp. All rights reserved
Customer Service
Email: cs@ipevo.com
Tel: +1-408-490-3085 (USA)
What is IPEVO Uplift
IPEVO Uplift is the ultimate tool for those who choose to use their smartphone as a document
camera or a webcam. Place your phone into the Uplift’s holder and have it become your table-top
camera which integrates the capabilities of webcams and of document cameras. Uplift aims to
enhance your distance communication experience and this guide will help you set it up.
Placing your smartphone into the holder
The îť·rst step is to insert the phone into the smartphone holder, which is located at the end of the
Uplift’s multi-jointed arm. To do that, please use the edge of your phone to support one of the
clamps and carefully pull the other clamp in the opposite direction with your free hand. When the
distance between the clamps is suîťşcient, please insert your phone carefully. The camera of your
phone should not be obstructed by the Uplift’s body and should be facing away from the Uplift’s
body.
Uplift can accommodate smartphones with a width ranging between 2.7 - 3.8 Inch (70 - 98mm).
Switch between
horizontal and
vertical view
The whole smartphone holder can
be rotated 360°, which allows users
to îť·nd the most suitable image
orientation for the type of thing
that they are showing and switch
the orientation with ease anytime
they need. Most commonly, the
horizontal orientation is used when
displaying the surface of one’s
desk, while the vertical orientation
is suitable for displaying one’s face
during video calls.
Operating the multi-jointed arm
Carry weight limit
Uplift can support phones of weight up to 0.66 lbs (300g). When using Uplift as a document camera,
ie. the smartphone’s camera is aiming downwards, it is recommended to have the joint number 2
positioned at 90° angle relative to the base. If you need to extend the arm further to the front and
Uplift starts tilting forward, please verify whether an additional protective cover of your smartphone
isn’t increasing its weight beyond what Uplift can support under this angle.
Increasing the image capturing area
In order to capture a wider area, you can increase the distance between the camera lens and your
desk by moving the Uplift’s arm into a more upright position.


Product specificaties

Merk: Ipevo
Categorie: Niet gecategoriseerd
Model: Uplift

Heb je hulp nodig?

Als je hulp nodig hebt met Ipevo Uplift stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Ipevo

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd