Intellinet 562010 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Intellinet 562010 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Important: Read before use. • Importante: Leer antes de usar.
5-Port PoE++ Switch with 4
Gigabit Ethernet Ports and
1 RJ45 Gigabit Uplink Port
Instructions
Model 562010 (IPS-5G01-140W)
For additional benets:
or go to: register.intellinet-network.com/r/562010
Scan to
register your
product warranty
2English
Instructions
The Intellinet Network Solutions 5-Port PoE++ Switch with 4 Gigabit Ethernet
Ports and 1 RJ45 Gigabit Uplink Port offers an array of time-saving, cost-effective
features while providing superior network throughput. No configuration is
required and installation is plug and play. Each of the ports automatically senses
the link speed of the connected network device and adjusts to 10, 100 or 1000
Mbps for compatibility and maximum performance. This PoE switch is designed
to provide compatible devices with enough power when needed. It offers up
to 90 watts of power per port on ports 1 - 4 until its power budget of 140 watts
is reached. The switch also includes a gigabit non-PoE uplink port to connect
to the networks backbone, a server or your video recording solution (NVR).
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/562010 or scan the QR code on the cover.
Front Panel
LED COLOR STATUS STATUS DESCRIPTION
Power Green Off Power Off
On Power On
LNK/ACT
(1-5) Green
Off No device is connected to the port.
On A device is connected to the port.
Flashing Sending or receiving data
PoE (1-4) Orange
Off No powered device (PD) is connected to the port.
On The connected device is receiving power.
Flashing Abnormal power supply
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance;
if a status LED doesn’t indicate a link or activity, check the
corresponding device for proper setup and operation.
Slide Switch
Select the PoE standard of the connected PD:
: for fully compliant 802.3bt/at/af PDs; 802.3bt
: for PDs that support the maximum power UPoE
from PSE over four pairs, regardless of the PD class,
including Cisco Universal Power over Ethernet.
* : if unsure as to the standard you NOTE
require, it is safe to try each setting.
3
English
Rear Panel
Power
The device is compatible with DC 54V, 2.8A. Plug the provided
power adapter into the designated DC interface on the switch.
Chassis Ground Column
Located on the side of the power supply connector, a grounding
terminal connector is used to provide proper grounding
for your Intellinet Network Solutions switch. If you use the
chassis grounding screw, it should be wired to an object that
provides earth ground. In rackmount installations, grounding
is typically provided by the metal frame of the mounting rack.
Placement
Desktop Installation
Prior to use, it is recommended that the
switch be placed/positioned:
on a level surface that can support the weight of
the switch (and possibly other objects) with at least
25 mm (approx. 1”) of clearance for ventilation;
away from sources of electrical noise (radios,
transmitters, broadband amplifiers);
and within 100 m (approx. 328’) of network
devices it’s to be connected to.
Wall Mounting
Install two screws into the wall at the distance of
the spaces on the back of the switch. Place the
switch over them and adjust until secure.
Instructions


Product specificaties

Merk: Intellinet
Categorie: Niet gecategoriseerd
Model: 562010

Heb je hulp nodig?

Als je hulp nodig hebt met Intellinet 562010 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Intellinet

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd