Intellinet 561242 Handleiding

Intellinet Niet gecategoriseerd 561242

Lees hieronder de 📖 handleiding in het Nederlandse voor Intellinet 561242 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

intellinetnetwork.com

24-Port Gigabit Ethernet PoE+

Switch with 2 SFP Ports and

LCD Screen Instructions

Model 561242

Important: Read before use. • Importante: Leer antes de usar.

24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports and LCD Screen

English

Instructions

LED COLOR STATUS STATUS DESCRIPTION

PWR Green O Power O

On Power On

LNK/ACT/

Speed

O No device connected.

Orange

(1 – 24)

On A device is connected to the port at 10/100 Mbps speed.

Flashing Sending or receiving data.

Green (1 –24,

SFPs 1 & 2)

On A device is connected to the port at 1000 Mbps speeds.

Flashing Sending or receiving data.

PoE Green

O No PSE/PoE device is linked.

On The connected device is receiving power.

Flashing Abnormal power supply.

Front Panel

Rear Panel

The Intellinet 24-Port Gigabit Ethernet Ultra PoE Switch with 2 SFP Ports and LCD Screen offers an array

of time-saving, cost-effective features while providing superior network throughput. No configuration is

required and installation is plug and play. Thanks to its optional desktop and 19” rackmount design, superior

performance and value, the switch is the perfect choice for your small office home or home network.

With a backplane speed of 52 Gbps, plenty of performance is available for your computers,

servers and other networking devices. Each of the ports automatically senses the link speed of the

connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum

performance. Designed to give ample power to compatible devices that need them, this PoE+

switch offers up to 30 watts of power per port until its power budget of 370 watts is reached.

Green Ethernet Technology

More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer,

notebook, network printer or other network-connected device is powered down, the switch continues to consume

the same amount of power as if the port were still active. Now, thanks to the new, energy efficient IEEE 802.3az

technology, this Intellinet switch detects link status to all connected devices and reduces the power usage of

ports not in use. In addition, the switch can adjust the level of power output based on the length of the network

cable connected to a particular port. This feature allows for the enjoyment of maximum network performance,

and when things slow down, it automatically scales back power usage to conserve energy and save money.

Power

Use the included power cord to connect the device (on the rear panel) to

an AC outlet. The device supports AC 100 – 240 V, 50/60 Hz.

Chassis Ground Column

Located on the right side of the power supply connector, the grounding terminal connector

is used to provide proper grounding for your Intellinet data switch. If you use the chassis

grounding screw, it should be wired to an object that provides earth ground. In rackmount

installations, grounding is typically provided by the metal frame of the mounting rack.

Instructions

English

PoE Status

24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports and LCD Screen

Placement

Power Usage

PD Light Load Protection

Overload Protection

PoE Shutoff

Short-circuit detected

Total PoE

Output

PoE

Budget

Over-voltage Protection Low-voltage Protection Over-temperature Protection

69.8

Example LED screen

Desktop Installation

Prior to use, it is recommended that the switch be placed/positioned on a level surface with at

least 25 mm (approx. 1”) of clearance for ventilation; away from sources of electrical noise: radios,

transmitters, broadband amplifiers within 100 m (approx. 328’) of network devices it’s to be connected

to. Attach the rubber feet to the bottom of each corner of the switch to increase stability.

Rackmount Installation

The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the mounting brackets on the switch’s side

panels (one on each side) and secure them with the screws provided.

Use the screws provided with the equipment rack to mount the Intellinet data switch on the rack.

The LCD screen displays the status of each port and provides valuable information

about crucial functions of the switch. See the description below for details.

Product specificaties

Merk:	Intellinet
Categorie:	Niet gecategoriseerd
Model:	561242
Kleur van het product:	Zwart
Gewicht:	4000 g
Breedte:	441.1 mm
Diepte:	204.3 mm
Hoogte:	44 mm
Geluidsniveau:	21.3 dB
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
LED-indicatoren:	Activity, Link, PoE, Power, Speed
Vormfactor:	1U
Meegeleverde kabels:	AC
Vermogensverbruik (max):	420 W
Certificering:	FCC Class A, CE, RoHS
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Temperatuur bij opslag:	-10 - 70 °C
Aantal ventilatoren:	2 ventilator(en)
Stroomspanning bescherming:	Over voltage, Overload, Short circuit
Rack-montage:	Ja
Mean time between failures (MTBF):	144000 uur
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Ja
Switchingcapaciteit:	52 Gbit/s
MAC-adrestabel:	8192 entries
Datastroombeheer:	Ja
Switch type:	Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten:	24
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Aantal moduleslots SPF:	2
Packet buffergeheugen:	0.512 MB
Full duplex:	Ja
Koperen ethernetbekabelingstechnologie:	10BASE-T, 100BASE-TX, 1000BASE-T
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Code geharmoniseerd systeem (HS):	85176990
Totaal Power over Ethernet (PoE)-budget:	370 W
Aantal Power over Ethernet plus (PoE +)-poorten:	24
Store-and-forward:	Ja
Ondersteundende kabel types:	Cat5, Cat5e
Rekbevestigingspakket:	Ja
Vermogen per poort Power over Ethernet (PoE):	30 W
Auto-sensing:	Ja
Packet forwarding rate (10 Mbps):	14880 pps
Packet forwarding rate (100 Mbps):	148800 pps
Packet forwarding rate (1 Gbps):	1488000 pps