Intellinet 508995 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Intellinet 508995 (16 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Scan to
register your
product warranty
Important: Read before use. β€’ Importante: Leer antes de usar.
Industrial 4-Port
Gigabit Ethernet
PoE++ Switch with 2
SFP Ports Instructions
Model 508995 (IIS-4G02POE-240W)
For additional benets:
or go to: register.intellinet-network.com/r/508995
2
The Intellinet Industrial 4-Port Gigabit Ethernet PoE++ Switch with 2 SFP Ports offers
an array of time-saving, cost-effective features while providing superior network
throughput. No configuration is required and installation is plug and play.
Features
β€’ Provides power and data connections for up to four PoE network devices
β€’ IP40 slim-type metal housing to withstand harsh industrial conditions
β€’ Wide operating temperature: -20 – 75Β°C (4 – 167Β°F)
β€’ Option for DIN-rail installation
β€’ Two small form-factor pluggable GBIC module slots (SFP)
β€’ Two redundant DC inputs (48 - 57 V) with I/O terminal block
With a backplane speed of 12 Gbps, plenty of performance is available for your
computers, servers and other networking devices. Each of the ports automatically
senses the link speed of the connected network device and adjusts to 10, 100 or
1000 Mbps for compatibility and maximum performance. This PoE switch is designed
to provide compatible devices with enough power when needed. It offers up to
95 watts of power per port until its power budget of 240 watts is reached.
For specifications, visit . Register your product at intellinetnetwork.com register.
intellinet-network.com/r/508995 or scan the QR code on the cover.
Placement
Desktop Installation
Prior to use, place/position the switch:
β€’ on a level surface that can support the weight of the switch and that
offers at least 25 mm (approx. 1”) of clearance for ventilation;
β€’ away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
β€’ within 100 m (approx. 328’) of network devices it’s to be connected to.
DIN-Rail Installation
1 With DIN-rail bracket attached to device with screws, angle bracket onto DIN rail.
2 Push device in till it clicks into place.
1 2
English
Instructions
3
Power
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal
connector is used to provide proper grounding for your Intellinet Network
Solutions switch. It should be wired to an object that provides earth ground.
Terminal Block Installation
NOTE: Ensure all power is off/disconnected before beginning!
1 Loosen appropriate screws.
2 Insert bare power-supply wires into appropriate terminals (positive wire
into positive terminal; negative wire into negative terminal).
3 Tighten appropriate screws to secure wires. (If desired, repeat steps 1 – 3 on second input pair.)
4 Install block into the device and tighten screws.
Front Panel
LED Color Status Status Description
PWR Green On Power on
Off Power off
Link 1 – 4 Yellow On Valid port connection
Blinking Sending or receiving data
SFP 1 & 2 Green Off No link established.
PoE 1 – 4 Green On The connected Powered Device (PD) is receiving power.
Off No PD is linked.
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate
a link or activity, check the corresponding device for proper setup and operation.
P2P1
Instructions
English


Product specificaties

Merk: Intellinet
Categorie: Schakelaar
Model: 508995

Heb je hulp nodig?

Als je hulp nodig hebt met Intellinet 508995 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Schakelaar Intellinet

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar