Intel Edison Kit for Arduino Handleiding

Intel Niet gecategoriseerd Edison Kit for Arduino

Lees hieronder de 📖 handleiding in het Nederlandse voor Intel Edison Kit for Arduino (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 207 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Intel® Edison Kit for Arduino*

Hardware Guide

December 2014

Revision 004

- Document Number: 331191 004

Notice: This document contains information on products in the design phase of development. The information here is subject to change without

notice. Do not finalize a design with this information.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVI DED IN INTEL’S TERMS AND

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A

PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death.

SHOULD YOU PURCHASE OR USE INTEL’S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL

AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST

ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF

PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT

INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or

characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no

responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without

notice. Do not finalize a design with this information.

Intel software products are copyrighted by and shall remain the property of Intel Corporation. Use, duplication, or disclosure is subject to

restrictions stated s Software License Agreement, or in the case of software delivered to the government, in accordance with the software in Intel’

license agreement as defined in FAR 52.227- 7013.

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from

published specifications. Current characterized errata are available on request.

The code names presented in this document are only for use by Intel to identify products, technologies, or services in development that have not

been made commercially available to the public, i.e., announced, launched, or shipped. They are not "commercial" names for products or services

and are not intended to function as trademarks.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling

1- - - . 800 548 4725 or by visiting Intel’s website at http://www.intel.com/design/literature.htm

Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across

different processor families. See for details. http://www.intel.com/products/processor_number

Intel, the Intel logo, and Intel Atom are trademarks of Intel Corporation in the United States and other countries .

* Other brands and names may be claimed as the property of others.

Intel® Edison Kit for Arduino*

Hardware Guide December 2014

2 1- Document Number: 33119 004

Contents

1 Introduction ....................................................................................................................................................................... 6

1.1 Software requirements ............................................................................................................................................................... 6

1.2 Terminology .................................................................................................................................................................................... 6

1.3 References ........................................................................................................................................................................................ 6

2 Product Overview ............................................................................................................................................................. 7

2.1 Shield pin GPIO mapping .......................................................................................................................................................... 8

2.2 Pin function multiplexing control (summary) .................................................................................................................. 9

2.3 Pin function multiplexing control (detailed) .................................................................................................................. 10

2.4 GPIO interrupt support ............................................................................................................................................................ 11

2.5 Miscellaneous GPIOs............................................................................................................................................................... 11

2.6 Pin direction and pullup control ......................................................................................................................................... 12

3 - High Level Functional Description ............................................................................................................................. 13

3.1 Intel® Edison kit for Arduino* header signal list ........................................................................................................... 14

3.2 Intel® Edison kit for Arduino* PWM swizzler ................................................................................................................. 15

3.3 Intel® Edison kit for Arduino* analog inputs .................................................................................................................. 16

3.4 Intel® Edison kit for Arduino* signal pullup resistors ................................................................................................ 16

3.5 Intel® Edison kit for Arduino* USB interface .................................................................................................................. 16

3.6 Intel® Edison kit for Arduino* power supply .................................................................................................................. 17

3.7 Intel® Edison kit for Arduino* expansion mechanicals ............................................................................................. 17

4 Powering the Intel® Edison kit for Arduino*................................................................................................................18

4.1 Boot voltage selection – DCIN signal ................................................................................................................................ 19

5 Batteries............................................................................................................................................................................ 20

6 Layout................................................................................................................................................................................ 21

6.1 Antenna keepout ........................................................................................................................................................................ 21

6.2 Layout SD card, I2S, SPI, I2C ................................................................................................................................................. 21

6.3 LEDs .................................................................................................................................................................................................. 22

7 Handling ...........................................................................................................................................................................23

8 Debug UART and Low- Power Sleep Mode ................................................................................................................ 24

9 Buttons.............................................................................................................................................................................. 25

9.1 Software recovery (FWR_RCVR and RCVR_MODE) .................................................................................................... 25

10 Digikey sources ............................................................................................................................................................... 26

11 Shield pin configuration............................................................................................................................................... 27

11.1 Configure IO5 as a GPIO input, with pullup resistor disabled ............................................................................... 27

11.2 Configure IO11 as a GPIO input, with pullup resistor disabled .................................................................................. 28

11.3 Configure IO7 a as GPIO input, with pullup resistor enabled ........................................................................... 28

11.4 Configure IO6 a as PWM output........................................................................................................................................ 29

11.5 Configure IO14 as an ADC input ....................................................................................................................................... 29

11.6 IO18/IO19 Configure Ifor 2C connectivity..................................................................................................................... 30

11.7 Configure connectivity IO10 through IO13 for SPI ..................................................................................................31

Intel® Edison Kit for Arduino*

December 2014 Hardware Guide

Document Number: 331191- 3 004

Product specificaties

Merk:	Intel
Categorie:	Niet gecategoriseerd
Model:	Edison Kit for Arduino
Breedte:	25 mm
Diepte:	35.5 mm
Hoogte:	3.9 mm
Productnaam:	Intel Edison Kit for Arduino*
Bluetooth:	Ja
Frequentie van processor:	500 MHz
Processormodel:	Intel Quark SoC X1000
64-bit computing:	Nee
Wi-Fi-standaarden:	802.11a, 802.11b, 802.11g
Bluetooth-versie:	4.0
Vormfactor:	25mm x 35.5mm
Ethernet LAN:	Nee
Compatibele geheugenkaarten:	SD, SDHC
Processor lithografie:	22 nm
DC voltage input:	3.15 - 4.5 V
Aantal USB-aansluitingen:	1
USB-versie:	2.0
Bluetooth Low Energy (BLE):	Ja
Intern geheugentype:	LPDDR3
Processor socket:	70-pin Hirose .4mm
ECC ondersteund door processor:	Nee
Maximum intern geheugen:	4 GB
Ingebouwde grafische adapter:	Nee
Intel® Flex Memory Access:	Nee
Intel® AES New Instructions (Intel® AES-NI):	Nee
CPU configuratie (max):	1
Ingebouwde opties beschikbaar:	Nee
Intel® Virtualization Technology for Directed I/O (VT-d):	Nee
Intel® Clear Video-technologie:	Nee
Verpakkingsgrootte processor:	25mm x 35.5mm mm
Intel® Trusted Execution Technology:	Ja
Intel® Anti-Theft Technology (Intel® AT):	Nee
Frequentiebereik:	2.4 - 5 GHz
Output current:	100 mA
Spanning:	1.8 V
Flash memory:	4096 MB
Maximaal intern geheugen ondersteund door processor:	4 GB
ECC:	Nee
Kloksnelheid geheugen:	800 MHz
Trusted Platform Module (TPM):	Nee
Export Control Classification Number (ECCN):	5A992C
Maximaal intern geheugen:	4096 MB
FSB Parity:	Nee
Physical Address Extension (PAE):	Ja
Intel® vPro™ Platform Eligibility:	Nee
Intel® Dual Display Capable Technology:	Nee
Intel® Rapid Storage Technology:	Nee
Intel® Fast Memory Access:	Nee
Geheugen kanaal:	Dubbelkanaals
Seriële poort(en):	2
Intel® High Definition Audio (Intel® HD Audio):	Nee
Geheugenbus:	32 Bit
Ondersteunde geheugen types:	DDR3-SDRAM
Wifi:	Ja
Bedrijfstemperatuur (T-T):	0 - 40 °C
Type product:	11
Intel® Matrix Storage Technology (Intel® MST):	Nee
Intel® Active Management Technology (Intel® AMT):	Nee
Code geharmoniseerd systeem (HS):	8471500150
Soort flashgeheugen:	NAND
Commodity Classification Automated Tracking System (CCATS):	740.17B1
Parallele port via interne header:	Nee
Audiokanalen:	1
Consumer Infrared Headers:	Nee
Marktsegment:	Desktop
Seriële port via interne header:	Ja
Back-to-BIOS button:	Nee
Model microcontroller:	Intel® Quark
Geïntegreerde LAN:	Nee
Moederbord ARK ID:	84571
Audio port type:	I2S
Ingebouwde wifi:	Yes, 802.11n
Lage halogeen opties beschikbaar:	Nee
Lanceringsdatum:	Q3'14
Intel® Remote Wake Technology (Intel® RWT):	Nee
Intel® Remote PC Assist Technology (RPAT):	Nee
Intel® Quiet System Technology (QST):	Nee
Intel® Quick Resume Technology:	Nee
Intel® Client Initiated Remote Access (CIRA) technology:	Nee
Intel® AC'97 technology:	Nee
Extended Life Program (XLP):	Nee
Pakket afmeting:	25 x 35.5 mm
ARK ID:	84571
Status:	Discontinued
FSB's ondersteund:	N/A
Productfamilie:	Intel Edison
Productserie:	Intel Edison kit
Introductiedatum:	Q3'14
Gelijkstroom-invoer mogelijk:	Nee
Vereist een processor met Intel Graphics Technology:	Nee
Maximaal geheugen:	4 GB
Laatste wijziging:	63903513
Datum verwachte stopzetting:	06/16/2017
FireWire-ondersteuning:	Nee
Microcontroller-frequentie:	100 MHz