Integral LED ILRC1224VCV3C3A Handleiding

Integral LED Verlichting ILRC1224VCV3C3A

Lees hieronder de 📖 handleiding in het Nederlandse voor Integral LED ILRC1224VCV3C3A (2 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Integral LED RGB Colour Changing Remote Control and Receiver

ILRC1224VCV3F3A/ ILRC1224VCV3C3A

1. Introduction 2. Parameter

Receiver:

• Compatible Remote: M3/M6

• Power Input: DC12V~DC24V

• Max Current Load: Max 3Ax3CH

• Max Output Power: 108W(12V)/216W(24V)

• Gray Scale Level: Max4096×4096×4096

• Working Temp.: -30ºC~55 Cº

• Dimensions: L135×W30×H20(mm)

• Weight (N.W.): 47g

Total Weight (G.W.): 135g

Remote:

• Working Voltage: 3V (battery CR2032)

• Working Frequency: 433.92MHz

• Remote Distance: 40m~50m

• Working Temp.: -20ºC~55 Cº

• Remote Dimensions: L104×W58×H9(mm

• Remote Holder Dimensions:

L108×W63×H14(mm)

• Weight(N.W.): 42g

INTRODUCTION

The Integral LED RGB Colour Changing Remote

Control and Receiver is designed to work with

the Integral LED RGB Colour Strip. You will be

able to change the colour of the strip in dierent

colour modes to change the mood and look of

your space instantly. You can also dim the strip to

your ideal level. The strip can also switch between

dierent colour modes on continuous basis to

add excitement.

Power input socket

Remote ID learning

bu on

Indic or lightat

LED lamp c n socketonneco

RGB V+ RGB control

3. Operating Instruction for Receiver

The Remote control has been matched to the receiver before leaving the factory, if deleted accidentally you can restore the ID as follows.

Learning ID: Short press the ID learning button on the receiver until the indicator light is on, then press any key on the remote control, the indicator

light ashes several times. The ID is now activated.

Cancel ID: Press ID learning button on the receiver for 5 seconds.

One receiver can be matched to up to 10 remote controls.

WARNING

DO NOT CONNECT THE RECEIVER TO A MAINS SUPPLY.

THE RECEIVER MUST ONLY BE CONNECTED TO A SUITABLE 12V/24V LED DRIVER.

IMPORTANT NOTICE

• This product should be installed according to the instructions in this guide

and by a qualied electrical installer.

• All electrical work must be completed in accordance with the latest IET

wiring regulations (formally IEE) for the UK or in accordance with all

applicable regulations and laws in the country in which it is being installed.

• Switch OFF power at the mains before installing the product.

• Always disconnect or switch o the power supply before making any

adjustment to the wiring.

• Observe the operating temperature of the product: -30C to +55C

• Limited 5 Year Warranty. This LED Remote control and Receiver is for

indoor use only. Improper installation, abuse or miss-powering of the

remote control and receiver or failure to use the remote control and

receiver for its intended use will void the warranty. Proof of purchase is

required for all returns. Your statutory rights remain unaected.

Please see www.integral-LED.com/warranty.

Questions? Please contact you supplier or see integral-LED.com

IP00

Integral LED is a division of Integral Memory plc

London NW10 0UF

ON/OFF

Speed/Brightness+

Mode Key

Speed/Brightness-

Touch

Color Circle

RGB

Tables of Changing Mode:

5. Static Purple

6. Static Cyan

7. Static White

8. RGB Skipping

9. 7 Colors Skipping

10. RGB Color Smooth

11. Full-color Smooth

1. Static Red

2. Static Green

3. Static Blue

4. Static Yellow

(Change the modes

in sequence)

RGB

ON/OFF

Loop Play

Color

Shortcut Key

Mode

Shortcut Key Speed+/Speed-

Brightness+/-

4. Wiring Diagram

5. Operating Instruction for Remote Control

Receiver to strip

mark on

Receiver

mark on

Strip

V+ V+

R R

G G

B B

RGB Control

Please make sure you connect

the strip to receiver correctly,

indicated as following table.

6. Product size

20mm

135mm

128mm

mm03

60mm 9mm

104mm

Receiver

RF remote Remote holder

DC+

12V/24V DC220-240V AC

DC-

Driver

Receiver

RGB V+ RGB control

V+

LED Strip

DC+

12V/24V DC220-240V AC

DC-

Driver

Receiver

RGB V+ RGB control

LED Strips

V+

Sleep mode: when the touch remote

unattended operation over 30s, it can

automatically enter standby mode to

extend battery life.

Press any of these four keys to continue.

Product specificaties

Merk:	Integral LED
Categorie:	Verlichting
Model:	ILRC1224VCV3C3A
Kleur van het product:	Wit
Gewicht:	89 g
Gewicht verpakking:	135 g
Breedte verpakking:	132 mm
Diepte verpakking:	22 mm
Materiaal behuizing:	Kunststof
Stroombron:	DC
Stroom:	9 A
Certificering:	CE, RoHS\nLVD\nEN-60950-1
Aantal per verpakking:	1 stuk(s)
Maximaal vermogen:	216 W
Lengte van de verpakking:	200 mm
Dimbaar:	Ja
AC-ingangsspanning:	12 - 24 V
Bedrijfstemperatuur (T-T):	-30 - 55 °C