Integra DHC-80.6 Handleiding

Integra Receiver DHC-80.6

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Integra DHC-80.6 (107 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/107
CONTENTS
AM/FM Radio Receiving Function 2
Tuning into a Radio Station 2
Registering an AM/FM Radio Station 3
Using RDS (Australian and Asian models) 3
Playing Content from a USB Storage Device 5
Listening to Internet Radio 6
About Internet Radio 6
TuneIn 6
Pandoraยฎโ€“Getting Started (U.S., Australia and
New Zealand only) 7
SiriusXM Internet Radio (North American only) 8
Slacker Personal Radio (North American only) 9
Registering Other Internet Radios 10
DLNA Music Streaming 12
About DLNA 12
Configuring the Windows Mediaยฎ Player 12
DLNA Playback 12
Controlling Remote Playback from a PC 13
Music Streaming from a Shared Folder 14
About Shared Folder 14
Setting PC 14
Playing from a Shared Folder 14
Using Remote Controller for Playing Music Files 16
About the Remote Controller 16
Remote Controller Buttons 16
Icons Displayed during Playback 16
Using the Listening Modes 17
Selecting Listening Mode 17
Contents of Listening Modes 18
Checking the Input Format 21
Advanced Settings 22
How to Set 22
1.Input/Output Assign 23
2.Speaker Setup 26
3.Audio Adjust 33
4.Source Setup 35
5.Listening Mode Preset 39
6.Miscellaneous 40
7.Hardware Setup 50
8.Remote Controller Setup 55
9.Lock Setup 55
Operating Other Components with the Remote
Controller 56
Functions of Remote Mode Buttons 56
Programming Remote Control Codes 56
TV Operation 57
Blu-ray Disc Player/DVD Player/DVD Recorder
Operation 58
VCR/PVR Operation 58
Satellite Receiver/Cable Receiver Operation 59
CD Player Operation 59
Cassette Tape Deck Operation 59
To Operate CEC-compatible Components 60
Assigning Another Device's Remote Controller
Functions to the Unit's Remote Controller 60
Assigning an Operation Sequence to the Remote
Controller (Macro Function) 60
Advanced Speaker Connection 63
Bi-Amping 63
Connecting Dipole Speakers 63
Connecting and Operating Onkyo RI Components 64
About RI Function 64
RI Connection and Setting 64
iPod/iPhone Operation 65
Control Function between the Unit and External
Component 66
Firmware Update 67
About Firmware Update 67
Updating the Firmware via Network 67
Updating the Firmware via USB 68
Troubleshooting 70
Reference Information 76
E
n
DHC-80.6
Advanced Manual
AM/FM Radio Receiving Function
2
AM/FM Radio Receiving Function
Tuning into a Radio Station
๎€‚๎€ƒ Tuning into stations automatically
1. Press Tuner on the main unit several times to select
either "AM" or "FM".
2. Press Tuning Mode so that the "AUTO" indicator on the
display lights.
3. Press Tuning to start automatic tuning.
๎€‚๎€ƒ Searching automatically stops when a station is
found. When tuned into a radio station, the "
TUNED " indicator on the display lights. If FM stereo
broadcasting is tuned, the "FM STEREO" indicator
lights.
๎€‚๎€ƒ No sound is output while the " TUNED " indicator
is off.
When the signal from an FM radio station is weak:
Radio wave may be weak depending on the building
structure and environmental conditions. In that case,
manually tune into the radio station of your choice by
referring to the next section.
๎€‚๎€ƒ Tuning into stations manually
1. Press Tuner on the main unit several times to select
either "AM" or "FM".
2. Press Tuning Mode so that the "AUTO" indicator on the
display goes off.
3. Press Tuning to select the desired radio station.
๎€‚๎€ƒ The frequency changes by 1 step each time
you press the button. The frequency changes
continuously if the button is held down and stops
when the button is released. Tune by looking at the
display.
To return the display to "AUTO": Press Tuning Mode
on the main unit again. A station is automatically tuned.
Normally "AUTO" should be displayed.
๎€‚๎€ƒ Tuning into stations by frequency
It allows you to directly enter the frequency of the radio
station you want to listen to.
1. Press Tuner on the remote controller several times to
select either "AM" or "FM".
2. Press D.TUN.
3. Using the number buttons, enter the frequency of the
radio station within 8 seconds.
๎€‚๎€ƒ To enter 87.5 (FM), for example, press 8, 7, 5, or 8,
7, 5, 0. If you entered a wrong number, press D.TUN
and enter a correct one.
AM/FM Radio Receiving Function
3
Registering an AM/FM Radio Station
It allows you to register up to 40 of your favorite AM/FM
radio stations. Registering radio stations in advance allows
you to tune into your radio station of choice directly.
๎€‚๎€ƒ Registering a Station
1. Tune into the AM/FM radio station you want to register.
2. Press Memory on the unit so that the preset number on
the display flashes.
3. Repeatedly press Preset to select a number
between 1 and 40 while the preset number is flashing
(about 8 seconds).
4. Press Memory again to register the station.
๎€‚๎€ƒ When the station is registered, the preset number
stops flashing.
๎€‚๎€ƒ Repeat this procedure for all of your favorite AM/FM
radio stations.
๎€‚๎€ƒ Selecting a Preset Radio Station
1. Press CH +/- on the remote controller to select a preset
number.
๎€‚๎€ƒ Alternatively you can press Preset on the
main unit. You can also select by directly entering
the preset number with the number buttons on the
remote controller.
๎€‚๎€ƒ Deleting a Preset Radio Station
1. Press CH +/- on the remote controller to select the
preset number to delete.
2. Press and hold Memory on the main unit and press
Tuning Mode to delete the preset number.
๎€‚๎€ƒ When deleted, the number on the display goes off.
Using RDS (Australian and Asian models)
RDS stands for Radio Data System and is a method of
transmitting data in FM radio signals.
rRDS works only in areas where RDS broadcasts are
available.
rIn some cases, the text information appeared on the
display is not identical to the content transmitted by
the RDS station. Furthermore, unexpected characters
may be displayed when the unit receives unsupported
characters. However, this is not a malfunction.
rIf the signal from an RDS station is weak, the RDS data
may be displayed continuously or not at all.
PS (Program Service): Tuning into a radio station
distributing Program Service information displays
the radio station name. Pressing Display displays the
frequency for 3 seconds.
RT (Radio Text): Tuning into a radio station transmitting
Radio Text information displays text on the display of the
unit.
PTY (Program Type): Allows you to search for RDS
stations by program type.
TP (Traffic Program): Allows you to search for radio
stations transmitting traffic information.
๎€‚๎€ƒ Displaying Radio Text (RT)
1. Press RT/PTY/TP on the main unit once.
๎€‚๎€ƒ The Radio Text (RT) is displayed scrolling across
the display. "No Text Data" is displayed when no text
information is available.


Product specificaties

Merk: Integra
Categorie: Receiver
Model: DHC-80.6

Heb je hulp nodig?

Als je hulp nodig hebt met Integra DHC-80.6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Integra

Handleiding Receiver

Nieuwste handleidingen voor Receiver