Innovaphone IP1202 Handleiding

Innovaphone Niet gecategoriseerd IP1202

Lees hieronder de 📖 handleiding in het Nederlandse voor Innovaphone IP1202 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Errors and omissions excepted. All information, technical specifications and delivery times may be subject to change.

innovaphone IP1202

Qui c k i n sta l lati o n gu i de: How t o get s tarte d?

Front view

LED

Back view

Reset

Used for cable ties to provide

strain relief for cables

2 / 4

Back view while lying down

LAN Power Supply

(RJ45) (RJ45)

Contents of the Box

 IP1202 with integrated antennas

 A mounting bracket

 Two screws with wall plugs

Power Distribution

The IP1202 can be powered using the following methods:

 Power over Ethernet, IEEE 802.3af

 A local AC-adapter

The PIN setting on the RJ45-power plug is

 PIN1 – minus

 PIN2 – plus

counted from right while IP1202 is lying down on the back.

Software

The software in the IP1202 can be updated by downloading new software without disconnecting the

equipment. The new software is stored in flash memory.

Connectors

Two 8-pin RJ45 modular jacks for LAN / PoE and powering

3 / 4

LEDs

The IP1202 has one RGB LED to indicate status. This section describes the different indications and

when they shall be used. In the illustrations below: Each blink pattern is represented by a number of

blocks where each block is 100 ms. Light grey blocks means that the LED is off. Whenever the

indication is changed the new pattern always starts from the first block.

Idle/OK IP1202 operational and

no traffic on the IP1202.

Starting up/

searching The IP1202 is in start-up

phase, e.g. waiting for

parameters from PARI

Master, or is searching

for air synchronization.

Active traffic IP1202 operational and

traffic on the IP1202.

Fully occupied for

speech traﬃc Fully occupied with

speech traffic.

Software

download Download of firmware in

progress.

Mini firmware The IP1202 is in mini

firmware mode.

TFTP mode

TFTP mode.

Error

No Ethernet connection.

Fatal error

Fatal hardware error.

Deployment:

Good sync The IP1202 is in

deployment mode and

has good air sync

coverage.

Deployment:

Bad sync

The IP1202 is in

deployment mode and

does not have adequate

air sync coverage.

Deployment:

No sync

The IP1202 is in

deployment mode and

has no air sync

coverage.

Product specificaties

Merk:	Innovaphone
Categorie:	Niet gecategoriseerd
Model:	IP1202
Gewicht:	400 g
Stroomvoorziening:	21-56 VDC
LED-indicatoren:	Ja
Stemcodecs:	CNG, G.711, G.723.1, G.729ab
Frequentieband:	0.1880 - 0.1900 GHz
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	EN 301 489-6, EN 301 489-1, EN 60945
Netvoeding:	5 W
Bekabelingstechnologie:	10/100Base-T(X)
Temperatuur bij opslag:	-25 - 55 °C
Veiligheid:	EN 60950-1
Power over Ethernet (PoE):	Ja
Ondersteunde data-overdrachtsnelheden:	10, 100Mb/s
Ondersteunde protocollen:	H.323 v4\r\nSIP v2( RFC 3261)\r\nSIP over UDP, TCP, TLS, SIPS\r\nRTP, SRTP, RTCP
Afmetingen (B x D x H):	170 x 170 x 38 mm
Overdrachtssnelheid:	0.1 Gbit/s
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	15 - 90 procent
Code geharmoniseerd systeem (HS):	85176990