Infosec R2 Pro 1500 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Infosec R2 Pro 1500 (17 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
User Guide ________________________ 2
Notice d’utilisation 9_________________
From VA k 1000 to 10 VA
AUTOMATIC VOLTAGE REGULATOR
REGULATEUR DE TENSION AUTOMATIQUE
INFOSEC UPS SYSTEM – 15, rue du Moulin - Sautron - FRANCE - www.infosec-ups.com 44880
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 16 AA XX 203 01
2
User guide
To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
Designed to be extremely efficient and user-friendly, R2 Pro is the perfect AVR to protect
your sensitive electronic equipments.
2 . M A I N C H A R A C T E R I S T I C S
Automatic Voltage Regulator
Automatically regulate the input voltage to a more stable level for your appliances to avoid
damages to the appliances.
Microprocessor Control
By means of innovative software control programs, the complicated hardware circuitry is
inlaid in the powerful microprocessor. Apart from reduced size, it also lowers the defective
rate of AVR and the accuracy in the regulations.
Voltage Display
Through a digital LED voltage meter shows the input/output voltage of the device.
Delay Time
Upon the switching on or resuming from the protections, the AVR will wait 6 or180 seconds
before it give output voltage
Operation Principle
The CPU based intelligent circuit samples the input voltage and controls the action of the
relays and opening of the coil winding of the transformer in a proper combination to adjust
the output voltage.
Loading Capability Diagram
Input voltage & Output Voltage diagram
Output Voltage
INFOSEC UPS SYSTEM – 15, rue du Moulin - Sautron - FRANCE - www.infosec-ups.com 44880
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 16 AA XX 203 01
3
3 . S A F E T Y I N S T R U C T I O N S S e c u r i t y
Risk of Electric Shock:
The unit uses potentially hazardous voltages. Do not attempt to disassemble AVR
this equipment as it does not contain accessible components that can be repaired by
users.
All repairs should be performed by qualified technicians only.
The utility power outlet shall be near the equipment and easily accessible. To isolate
the from AC input, remove the plug from the utility power outlet. AVR
Install the in a temperature and humidity-controlled indoor area free of AVR
conductive interference.
It should not be exposed to direct sunlight or sources of heat. Do not cover the
ventilation slots.
Disconnect the from AC power before cleaning with a damp cloth (no cleaning AVR
products).
In an emergency situation, switch the to the “Off position and disconnect the AVR
unit from the AC power supply.
When the is out of order, please refer to and call AVR section 8: trouble shooting
the hot line.
Connected products:
Make sure that the connected load does not exceed AVR capabilities.
Do not leave any recipients containing liquid on or near the AVR.
Do not plug the into a power strip or surge suppressor. AVR
The has been designed for sensitive equipments. It should not be used with AVR
equipment with inductive loads such as motors.
Do not connect any household appliances such as vacuum cleaners life-support or
systems to the AVR.
Due to excessive consumption, laser printers should not be connected to the AVR.
4 . S T O R A G E I N S T R U C T I O N S
Please keep or use the AVR in an environment which is
Well ventilated
Not exposed to direct sunlight or near any heating apparatus
Away from combustible gas, corrosive substance or heavy dust
Away from water, moisture, oil or grease
Secure of no risk of falling
Out of reach of children
In the event of fire in the vicinity, please use dry-powder extinguishers. The use of liquid
extinguishers may present a danger of electric shock.


Product specificaties

Merk: Infosec
Categorie: Niet gecategoriseerd
Model: R2 Pro 1500
Kleur van het product: Zwart
Ingebouwd display: Ja
Gewicht: 5000 g
Breedte: 160 mm
Diepte: 200 mm
Hoogte: 190 mm
LED-indicatoren: Ja
Beeldscherm: LED
Certificering: EN61000-6-3:2007+A1:2011+AC:2012, EN61000-6-1:2007, EN55022:210+AC:2011, EN55024:2010, EN61000-3-\n2:2014, EN61000-3-3:2013, EN61000-3-11:2000, EN61000-3-12:2011\nEN61558-2-12:2011, EN61558-1:2005+A1:2009
Draaghandvat: Ja
Duurzaamheidscertificaten: RoHS
Uitgangsvermogen: 900 W
Stroomspanning bescherming: Over voltage, Overheating, Overload, Short circuit, Under voltage
Frequentie: 50/60 Hz
Rack-montage: Nee
Spanning: 180-260 V
Aantal AC uitgangen: 2 AC-uitgang(en)
Nominale input voltage: 72 - 290 V
Output power capacity: 1.5 kVA
Output frequentie: 50/60 Hz
Voltage correctie bereik: 80 - 260 V

Heb je hulp nodig?

Als je hulp nodig hebt met Infosec R2 Pro 1500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Infosec

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd