Indesit IWDC 71680 ECO Handleiding

Indesit Wasmachine IWDC 71680 ECO

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit IWDC 71680 ECO (84 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/84
GB
1
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 4
Cutting off the water or electricity supply
Cleaning the washer-dryer
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 5
General safety
Disposal
Description of the washer-dryer and
starting a wash cycle, 6-7
Control panel
Indicator lights
Starting a wash cycle
Wash cycles, 8
Table of wash cycles
Personalisation, 9
Setting the temperature
Setting the drying cycle
Functions
Detergents and laundry, 10
Detergent dispenser drawer
Preparing the laundry
Garments requiring special care
Load balancing system
Troubleshooting, 11
Service, 12
IWDC 71680
Instructions for use
WASHER-DRYER
English,1
GB
Espol,13
ES NL
! This symbol reminds you to read this instruction manual.
FR
Français, 37
DE
Deutsch, 49 Ελληνικά, 61
GR
SK
Nederlands, 25
Slovensky, 73
2
GB
! This instruction manual should be kept in a safe
place for future reference. If the washing machine
is sold, transferred or moved, make sure that the
instruction manual remains with the machine so
that the new owner is able to familiarise himself/
herself with its operation and features.
! Read these instructions carefully: they contain
vital information relating to the safe installation
and operation of the appliance.
Unpacking and levelling
Unpacking
1. Remove the washing machine from its packaging.
2. Make sure that the washing machine has not
been damaged during the transportation process.
If it has been damaged, contact the retailer and do
not proceed any further with the installation process.
3. Remove the pro-4
tective screws (used
during transportation)
and the rubber washer
with the corresponding
spacer, located on the
rear part of the applian-
ce ( ).see figure
4. Close off the holes using the plastic plugs
provided.
5. Keep all the parts in a safe place: you will need
them again if the washing machine needs to be
moved to another location.
! Packaging materials should not be used as
toys for children.
Levelling
1. Install the washing machine on a flat sturdy
floor, without resting it up against walls, furniture
cabinets or anything else.
2. If the floor is not per-
fectly level, compensa-
te for any unevenness
by tightening or loo-
sening the adjustable
front feet ( ); see figure
the angle of inclination,
measured in relation to
the worktop, must not
exceed 2°.
Levelling the machine correctly will provide it with
stability, help to avoid vibrations and excessive
noise and prevent it from shifting while it is ope-
rating. If it is placed on carpet or a rug, adjust the
feet in such a way as to allow a sufficient venti-
lation space underneath the washing machine.
Connecting the electricity and wa-
ter supplies
Connecting the water inlet hose
1. Connect the supply
pipe by screwing it to
a cold water tab using
a ¾ gas threaded con-
nection (see figure).
Before performing the
connection, allow the
water to run freely until
it is perfectly clear.
2. Connect the inlet
hose to the washing
machine by screwing
it onto the correspon-
ding water inlet of the
appliance, which is si-
tuated on the top right-
hand side of the rear
part of the appliance
(see figure).
3. Make sure that the hose is not folded over
or bent.
! The water pressure at the tap must fall within
the values indicated in the Technical details table
(see next page).
! If the inlet hose is not long enough, contact a
specialised shop or an authorised technician.
! Never use second-hand hoses.
! Use the ones supplied with the machine.
Installation
GB
3
Technical data
Model IWDC 71680
Dimensions
width 59,5 cm
height 85 cm
depth 53,5 cm
Capacity
from 1 to 7 kg for the wash
programme;
from 1 to 5 kg for the drying
programme
Electrical
connections
please refer to the technical
data plate fixed to the machine
Water con-
nection
maximum pressure 1 MPa
(10 bar)
minimum pressure 0.05 MPa
(0.5 bar)
drum capacity 52 litres
Spin speed
up to 1600 rotations per minute
Energy
rated pro-
grammes
according to
regulation
EN 50229
Wash: programme 2; tem-
perature 60°C;
run with a load of 7 kg.
Drying: the smaller load must
be dried by selecting the “
” dryness level. The load
must consist of 2 sheets, 1
pillowcase and 1 hand towel;
the remainder of the load
must be dried by selecting
the “ ” dryness level.
This appliance conforms to
the following EC Directives:
- 2004/108/EC (Electroma-
gnetic Compatibility)
- 2002/96/EC
- 2006/95/EC Low Voltage)
65 - 100 cm
Connecting the drain hose
Connect the drain
hose, without bending
it, to a drainage duct or
a wall drain located at a
height between 65 and
100 cm from the floor;
alternatively, rest it on
the side of a washba-
sin or bathtub, faste-
ning the duct supplied
to the tap (see figure).
The free end of the
hose should not be
underwater.
! We advise against the use of hose extensions;
if it is absolutely necessary, the extension must
have the same diameter as the original hose and
must not exceed 150 cm in length.
Electrical connections
Before plugging the appliance into the electricity
socket, make sure that:
the socket is earthed and complies with all
applicable laws;
the socket is able to withstand the maximum
power load of the appliance as indicated in the
Technical data table (see opposite);
the power supply voltage falls within the values
indicated in the Technical data table (see opposite);
the socket is compatible with the plug of the
washing machine. If this is not the case, repla-
ce the socket or the plug.
! The washing machine must not be installed
outdoors, even in covered areas. It is extremely
dangerous to leave the appliance exposed to
rain, storms and other weather conditions.
! When the washing machine has been installed,
the electricity socket must be within easy reach.
! Do not use extension cords or multiple sockets.
! The cable should not be bent or compressed.
! The power supply cable must only be replaced
by authorised technicians.
Warning! The company shall not be held responsible
in the event that these regulations are not respected.
The first wash cycle
Once the appliance has been installed, and before
you use it for the first time, run a wash cycle with
detergent and no laundry, using the wash cycle 2.


Product specificaties

Merk: Indesit
Categorie: Wasmachine
Model: IWDC 71680 ECO
Apparaatplaatsing: Vrijstaand
Soort bediening: Buttons, Rotary
Kleur van het product: Wit
Deurscharnieren: Links
Ingebouwd display: Nee
Gewicht: 64000 g
Breedte: 595 mm
Diepte: 535 mm
Hoogte: 850 mm
Type lader: Voorbelading
Trommelinhoud: 52 l
Uitgestelde start timer: Ja
Startvertraging: 12 uur
Aantal droogprogramma's: 3
Breedte verpakking: 650 mm
Diepte verpakking: 590 mm
Hoogte verpakking: 890 mm
Energie-efficiëntieklasse (oud): A
Energieverbruik wassen: 1.33 kWu
Wasklasse: A
Centrifuge-droger klasse: A
Geluidsniveau (wassen): 55 dB
Aanpasbare centrifugesnelheid: Ja
Maximale centrifugesnelheid: 1600 RPM
Droogcapciteit: 4 kg
Jaarlijks engergieverbruik wassen & drogen: 952 kWu
Energiegebruik bij wassen & drogen: 4.76 kWu
Waterverbruik wassen & drogen: 92 l
Water verbruik wassen: 50 l
Aantal wasprogramma's: 16
Duur wascyclus: 153 min
Nominale capaciteit (wassen): 7 kg
Wasprogramma's: Jeans/denim, Quick, Delicate/silk
Droogprogramma's: Snel

Heb je hulp nodig?

Als je hulp nodig hebt met Indesit IWDC 71680 ECO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Indesit

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine