Indesit BI WMIL 81485 UK Handleiding

Indesit Wasmachine BI WMIL 81485 UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit BI WMIL 81485 UK (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Quick Guide

CONTROL PANEL

1. ON/OFF button

2. START/PAUSE button with indicator light

3. WASH CYCLE PROGRESS indicator lights

4. DOOR LOCKED indicator light

5. FUNCTION buttons with indicator lights

6. CHILDLOCK button with indicator light

7. DELAY TIMER button

8. SPIN button

9. TEMPERATURE button

10. WASH CYCLE knob

11. PUSH & GO button

WASH CYCLE TABLE

Note: for the Eco 40-60 program in the WASH CYCLE TABLE the value of the maximum

eective spin is shown.

* By selecting the cycle and excluding the spin cycle, the washing machine will drain only.

** After programme end and spinning with maximum selectable spin speed, in default

programme setting.

*** The display will show the suggested spin speed as default value.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as

the temperature and pressure of the incoming water, ambient temperature, amount of

detergent, load quantity and type, load balancing and any additional options selected. The

values given for programmes other than the Eco 40-60 programme are indicative only.

1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The

most ecient programme in terms of energy and water consumption for washing normally

soiled cotton laundry.

For all testing institutes:

2) Long cotton cycle: set cycle 6 at a temperature of 40°C.

3) Long synthetics cycle: set cycle 7 at a temperature of 40°C.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump

7. Adjustable feet (4)

THANK YOU FOR BUYING A INDESIT PRODUCT

In order to receive a more complete assistance,

please register your product on

www.indesit.com/register

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed.

For more detailed instructions on how to remove them, see the Installation Guide.

DETERGENT DISPENSER DRAWER

Compartment 1:

Do not insert detergent in this compartment.

Compartment 2: Washing detergent (powder

or liquid)

Compartment 3: Additives (fabric softener, etc.)

The fabric softener must never exceed the

“max” level indicated on the central pin.

! Use powder detergent for white cotton

garments, for pre-washing, and for washing at

temperatures over 60°C.

! Follow the instructions given on the detergent

packaging.

8 7

Maximum load 8 kg

Power input in o mode 0,5 W / in left-on mode 8 W

Detergents and

Additives

Recommended

detergent

Residual

dampness %(**)

Energy consump-

tion kWh

Total water l

Laundry

temperature °C

Wash cycle

Temperature Maximum

spin

(r.p.m.)

Maximum

load

(kg)

Duration

(h : m)

Wash Fabric

softener

Powder Liquid

Setting Range 2 3

1 Cotton 30° 30°C – 30°C 1000 4,5 1:40   –– – – –

2 Synthetics 30° 30°C – 30°C 1000 4,5 1:30   –– – – –

3 Colours 30°C – 30°C 1000 4,5 1:35   –– – – –

4 Delicates 30°C – 30°C 600 1,0 1:20   –– – – –

5 Rapid 30’ 30°C – 30°C 1000 (***) 4,5 0:30   –71 0,20 45 27

6 Cotton (2) 40°C – 60°C 1400 8,0 3:55     49 1,40 105 45

7 Synthetics (3) 40°C – 60°C 1400 4,0 2:55     35 0,80 55 43

8 Mixed 40°C – 40°C 1400 8,0 1:45   –– – – –

40°C 40°C9Eco 40-60 (1)

1351 8,0 3:38     53 0,73 56 34

1351 4,0 2:48     53 0,55 53 34

1351 2,0 2:25     53 0,35 35 23

10 White Cotton 60°C – 90°C 1400 8,0 2:45     49 0,90 90 55

11 Sport 40°C – 40°C 600 3,5 1:35   –– – – –

12 20°C 20 °C - 20 °C 1400 8,0 1:50   –49 0,20 90 22

13 Wool 40°C – 40°C 800 2,0 1:10   –– – – –

14 Anti Odour 40°C – 40°C 1000 3,5 1:45   –– – – –

Rinse + Spin – – 1400 8,0 0:55 – – – – – – –

Spin + Drain * – – 1400 8,0 0:10 – – – – – – – –

  Required dosage Optional dosage

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Cotton 30°

A 30°C cycle for cotton garments. It allows for reducing

electricity consumption for heating the water while guaranteeing good

washing performance. Suitable for lightly soiled garments.

Synthetics 30°

A 30°C cycle for synthetic garments. It allows for reducing electricity

consumption for heating the water while guaranteeing good washing

results. Suitable for lightly soiled garments.

Colours

A 30°C cycle that helps to preserve colours, suitable for cotton or

synthetic coloured garments. It allows for reducing electricity

consumption for heating the water while guaranteeing good washing

results. Suitable for lightly soiled garments.

Delicates

Suitable for washing very delicate garments. It is advisable to turn the

garments inside out before washing them. For best results, use liquid

detergent on delicate garments. For washing silk items and curtains,

select cycle and activate the 4 option.

Rapid 30’

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of

resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Mixed

A 40°C cycle for washing cotton and synthetic garments together.

Suitable for lightly soiled underwear.

Eco 40-60

For washing normally soiled cotton garments declared to be washable at

40 °C or 60 °C, together in the same cycle. This is the standard cotton

programme and the most ecient in terms of water and energy

consumption.

! The cycle runs only at 40°C as per regulation.

White Cotton

For heavily soiled whites and resistant colours.

Sport

A cycle designed for washing lightly soiled sports clothing (tracksuits,

shorts, etc.); for best results, we recommend not exceeding the

maximum load indicated in the “Wash Cycle Table”. We recommend

using liquid detergent and adding the amount suitable for a half-load.

20 °C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Wool - Wool Care : The wool wash cycle of this machine has

been approved by The Woolmark Company for the washing of

machine washable wool products provided that the products

are washed according to the instructions on the garment label

and those issued by the manufacturer of this washing machine.

The Woolmark symbol is a Certication mark in many countries.

M2227

Anti odour

Use this cycle (for synthetic fabrics) to wash garments with bad odours

(e.g. smoke, sweat, fried food). The cycle is designed to remove bad

odours while preserving the fabric bres.

Rinse + Spin

Designed for rinsing and spinning.

Spin + Drain

Designed to spin and drain the water.

WASH CYCLE PHASE INDICATOR LIGHTS

Once the desired wash cycle has been selected and has begun, the

indicator lights switch on one-by-one to indicate which phase of the

cycle is currently in progress.

Wash

Rinse

Spin

Drain

End of Wash Cycle

DOOR LOCKED INDICATOR

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button; if the indicator light is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst

time, run a wash cycle with detergent and no laundry, by setting the

“Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

Rapid programming

- Turn the washing machine on by pressing the ON/OFF button. All the

indicator lights will light up for a few seconds, then only the lights

corresponding to the settings for the selected wash cycle will remain lit;

the START/PAUSE indicator light will also ash.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments as described in “DETERGENT DISPENSER DRAWER

section”.

- Close the door.

STARTING CYCLE

Press the PUSH & GO button.

The machine will lock the door ( symbol on)and the drum will start to

rotate; the door will be unlocked ( symbol OFF) and then locked again (

symbol on) as preparation phase of each washing cycle. The “Clicking”

noise is part of the door locking mechanism. Water will enter the drum

and start the washing phase once the door is locked.

Traditional programming

- Turn the washing machine on by pressing the ON/OFF button. All the

indicator lights will light up for a few seconds, then only the lights

corresponding to the settings for the selected wash cycle will remain lit;

the START/PAUSE indicator light will also ash.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the Wash Cycle Table.

- Pull out the detergent dispenser drawer and pour the detergent into the relevant

compartments as described in “DETERGENT DISPENSER DRAWER” section.

- Close the door.

- Set the WASH CYCLE knob to the desired cycle.

- Modify the temperature and/or spin: pressing the button allows for

gradually reducing the temperature down to the cold wash level (20°C).

The spin speed may be progressively reduced by pressing the button,

until it is completely excluded (the “ setting. If these buttons are ”

pressed again, the maximum values are restored.

- Select the desired wash cycle.

- Select the desired options.

STARTING CYCLE

Press the START/PAUSE button.

The machine will lock the door ( symbol on)and the drum will start to

rotate; the door will be unlocked ( symbol OFF) and then locked again (

symbol on) as preparation phase of each washing cycle. The “Clicking”

noise is part of the door locking mechanism. Water will enter the drum

and start the washing phase once the door is locked.

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash . If the indicator light is not lit, the door may be

opened. To start the wash cycle from the point at which it was

interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the indicator light turns on to signal that the door

cannot be opened. While a wash cycle is running, the door remains locked.

To open the door while a cycle is under way, for example, to add or remove

garments, press the START/PAUSE button to pause the cycle; the

indicator light will ash . If the indicator light is not lit, the door may be

opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the relative indicator light will ash ),

then select the desired cycle and press the START/PAUSE button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF button.

The cycle will be stopped and the machine will switch o.

END OF THE CYCLE

Once the cycle terminates the indicator light will light up; when the

indicator light switches o, the door may be opened. Open the door,

unload the laundry and switch o the machine. If you do not press “ON/

OFF” button, the washing machine will switch o automatically after

about a 10 minutes. Close the water tap, open the door and unload the

washing machine. Leave the door ajar to allow the drum to dry.

FUNCTIONS

- If the selected option is not compatible with the set wash cycle, the

indicator light will ash and the option will not be activated.

- If the selected option is not compatible with another previously

selected option, the indicator light will ash accompanied by a buzzer,

and only the latter option will be activated; the indicator light

corresponding to the activated option will turn on.

Stain removal

This option allows for selecting the type of dirt so as to optimally adjust

the cycle for removing the stains. The following types of dirt can be

selected:

- : for stains caused by foodstus and beverages, for example.Food

- : for grease and ink stains, for example.Work

- : for mud and grass stains, for example.Outdoor

! The wash cycle duration varies according to the type of selected dirt.

Extra rinse

By selecting this option, the eciency of the rinse is increased and

optimal detergent removal is guaranteed. It is particularly useful for

sensitive skin.

Easy iron

By selecting this function, the wash and spin cycles will be modied in

order to limit the formation of creases.

Delay start

To set a delayed start for the selected cycle, press the corresponding button

repeatedly until the desired delay period has been reached (3h-6h-9h). When

the button is pressed for the fourth time, the option will deactivate.

Once the START/PAUSE button has been pressed, the delay time can

only be modied by decreasing it until the set cycle is launched.

Temperature

Each wash cycle has a pre-dened temperature. To modify the

temperature, press the button.

Spin

Each wash cycle has a pre-dened spin speed. To modify the spin speed,

press the button.

Push & Go

To start the Push & Go cycle press and hold the relative button for 2

seconds. The lit indicator light indicates that the cycle has started.

This wash cycle is ideal for cotton or synthetic fabrics, as it washes at a

temperature of 30°C and a maximum spin speed of 1.000 rpm. Max load

3,5 kg (cycle duration 45’).

How does it work?

1. Load the laundry (cotton and/or synthetic garments) and close the door.

2. Pour the detergent and additives.

3. Start the cycle by pressing and holding the Push & Go button for 2

seconds. The relevant indicator light will turn green and the door will

lock (the symbol lights up).

N.B.: starting the wash cycle through the Push & Go button activates an

automatic non-customisable cycle recommended for cotton and synthetic

fabrics. This cycle does not allow for setting any additional options.

To open the door while an automatic cycle is under way, press the START/

PAUSE button; if the locked door symbol is o, the door may be

opened. Press the START/PAUSE button again to restart the cycle

from the point at which it was interrupted.

4. Once the programme is nished, the indicator light turns on.

CHILD LOCK

to activate the control panel lock, press and hold the button for

approximately 2 seconds. The lit symbol signals that the control

panel is locked. This prevents wash cycles from being modied

accidentally (except for the ON/OFF button), especially if there are

children in the home. To deactivate the control panel lock, press and hold

the button for approximately 2 seconds.

TIPS AND SUGGESTIONS

Divide the laundry according to:

Type of fabric (cotton, mixed bres, synthetics, wool, garments to be

hand-washed). Colour (separate coloured garments from whites, wash new

coloured garments separately). Delicates (small garments – such as nylon

stockings – and items with hooks – such as bras: insert them in a fabric bag).

Empty the pockets:

Objects such as coins or lighters can damage the washing machine and

the drum. Check all buttons.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of

surplus detergent

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the

“PROGRAMME CHART” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning

speed in the spinning phase, the higher the noise and the lower the

remaining moisture content.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washing machine

o and disconnect it from the mains power. Do not use ammable liquids to

clean the washing machine. Clean and maintain your washing machine

periodically (at least 4 times per year).

Disconnect the water and power supplies

Close the water tap after every wash. This will limit wear on the hydraulic

system inside the washing machine and help to prevent leaks.

Unplug the washing machine when cleaning it and during all

maintenance work.

Clean the washing machine

The outer parts and rubber components of the appliance can be cleaned using

a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.

The washing machine has a “Auto-clean” cycle for its internal parts; it

must be run without any load in the drum.

To optimise this cycle, it is possible to use either detergent (10% of the quantity

specied for lightly soiled garments) or special additives to clean the washing

machine. We recommend running a cleaning cycle every 40 wash cycles.

To start the cycle press buttons and simultaneously for 5 seconds.

The cycle will start automatically and will run for about 70 minutes. To

stop the cycle, press the START/PAUSE button.

Clean the detergent dispenser drawer

Wash it under running water; this operation should be repeated

frequently.

Care for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant

odours from forming.

Check the water inlet hose

Check the water inlet hose at least once a year. If it is cracked or broken, it

must be replaced: during wash cycles, the high pressure of the water

could suddenly split the hose open.

! Never use hoses that have already been used.

Cleaning the water lter / draining residual water

Switch o and unplug the washing machine, take out the kitchen plinth

before cleaning the water lter or draining residual water. The kitchen

plinth must be mounted back all the time once the cleaning operation is

over. If you used a hot wash programme, wait until the water has cooled

down before draining any water. Clean the water lter regularly, to avoid

that the water cannot drain after the wash due to obstruction of the lter.

If the water cannot drain, the display indicates that the water lter may

be clogged.

1 . Place a container close to the pump to collect any spillage.

2 . from the base Remove, pulling it out, the “emergency drain hose”

of the washing machine .

Remove the stopper of the “emergency drain hose” at the end of the

hose and let the water ow into the container.

3 . Turn the exhaust lter handle and pull it out of the housing .

When the container of plinth is full with water, plug the stopper to the

hose end, and reinsert the small hose in the washing machine’s base .

After, empty the container .

Afterwards rmly close the emergency drain hose with the stopper .

4. Remove lter: Lay a cotton cloth beneath the water lter, which can

absorb a small amount of rest water . Then remove the water lter by

turning it out anticlockwise .

5 . Clean the water lter: remove residues in the lter and clean it under

running water .

6 . Insert the water lter: Reinsert the water lter again by turning it in

clockwise direction . Make sure to turn it in as far as it goes; the lter

handle must be in vertical position . To test water tightness of the water

lter, you can pour about 1 liter of water into the detergent dispenser .

Then reinstall the kitchen plinth.

LOAD BALANCING SYSTEM

Before every spin cycle, to avoid excessive vibrations before every spin and

to distribute the load in a uniform manner, the drum rotates continuously

at a speed which is slightly greater than the washing rotation speed. If,

after several attempts, the load is not balanced correctly, the machine

spins at a reduced spin speed. If the load is excessively unbalanced, the

washing machine performs the distribution process instead of spinning.

To encourage improved load distribution and balance, we recommend

small and large garments are mixed in the load.

TRANSPORT AND HANDLING

Do not lift the washing machine by gripping it from the upper section.

Unplug the appliance and close the water tap. Check that the door and

detergent dispenser drawer are tightly closed. Detach the lling hose

from the water tap then detach the drain hose. Empty all the water

remaining in the hoses and secure the latter so that they do not get

damaged during transport. Apply the transport bolts back on. Repeat, in

reverse order, the transport bolt removal procedure described in the

“Health & Safety and Installation Guides”.

Product specificaties

Merk:	Indesit
Categorie:	Wasmachine
Model:	BI WMIL 81485 UK
Apparaatplaatsing:	Ingebouwd
Soort bediening:	Buttons, Rotary
Kleur van het product:	Wit
Deurscharnieren:	Links
Ingebouwd display:	Ja
Timer:	Ja
Gewicht:	66500 g
Breedte:	595 mm
Diepte:	545 mm
Hoogte:	815 mm
Netbelasting:	1850 W
Type stekker:	Type G
Aantal programma's:	14
Type lader:	Voorbelading
Deurkleur:	Wit
Materiaal trommel:	Roestvrijstaal
Snoerlengte:	1.2 m
Trommelinhoud:	58 l
Uitgestelde start timer:	Nee
Resterende tijd indicatie:	Nee
Kinderslot:	Ja
Anti-kreuk functie:	Ja
Energie-efficiëntieklasse:	B
Energie consumptie:	55 kWu
Gewicht verpakking:	68500 g
Breedte verpakking:	645 mm
Diepte verpakking:	595 mm
Hoogte verpakking:	890 mm
Energieverbruik wassen:	0.545 kWu
Waterconsumptie per cyclus:	48 l
Wasklasse:	A
Centrifuge-droger klasse:	B
Geluidsniveau (wassen):	70 dB
Sopschuimbewaking:	Ja
Onbalanscontrolesysteem:	Ja
Maximale centrifugesnelheid:	1400 RPM
Stroom:	13 A
Zelfreinigend:	Ja
Geluidsemissieklasse:	A
Functie voor kleding toevoegen (pauze):	Nee
Geluidsniveau bij centrifugeren:	70 dB
Aantal wasprogramma's:	14
Duur cyclus (snelwas programma):	30 min
Energieverbruik per 100 cycli:	55 kWu
Verstelbare voeten:	Ja
Land van herkomst:	Italië
Douane productcode (TARIC):	84501111
Kuip materiaal:	Kunststof
Doseringsassistent:	Nee
Half-geladen:	Nee
Watertoevoer:	Cold, Hot
Bruto gewicht:	68500 g
Nettogewicht:	66500 g
Deur openen:	Opening aan zijkant
Vlekkenverwijderaarsoptie:	Nee
Automatisch doseersysteem:	Nee
Afmetingen (B x D x H):	595 x 545 x 815 mm
Nominale capaciteit (wassen):	8 kg
Nominale capaciteit:	8 kg
Draaisnelheid:	1400 RPM
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 Hz
Type beeldscherm:	LED
Energie-efficiëntieschaal:	A tot F
Type motor:	Borstelloos
EAN:	8050147664209
Handwas:	Ja
Wasprogramma voor sportkleding:	Ja
Indesit-technologieën (kledingzorg):	Auto Clean, Rapid 30