Imarflex ICB-500 Handleiding

Imarflex Blender ICB-500

Lees hieronder de 📖 handleiding in het Nederlandse voor Imarflex ICB-500 (5 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
SPECIFICATION
MODEL NO. : ICB- 500
RATED VOLTAGE : 230Va.c. 60Hz
POWER CONSUMPTION : 500 Watts
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the
convenience outlet (230Va.c.).
3. Do not use two-way socket with other appliance.
4. Do not use any appliance with a damaged cord or plug. If the cord is damaged it
must be replaced with the same type and size or bring the unit to the nearest
Imarex Authorized Service Center.
5. Do not place the unit near gas stove, electric stove or in a heated oven.
6. Put the unit on stable surface; keep it away from the edge of counter to avoid
accident.
7. Children should be supervised to ensure that they do not play with the appliance.
8. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
9. To protect against electric shock, do not immerse the base in water.
10. Blade is sharp, handle it carefully.
11. Do not put the blade assembly on the base without the plastic jar.
12. Do not use the blender if the plastic jar has a crack.
13. Do not use the unit for outdoor use.
14. Do not use this unit other than its intended use.
15. For household use only; not intended for any business purposes.
16. Save this instruction manual for future reference.
DESCRIPTION OF PARTS
1. Center Lid
2. Lid
3. Glass Jar
4. Glass Jar Support
5. Rubber Packing
6. Blade Assembly
7. Jar Support
8. Motor Base
9. Selector Switch
HOW TO ASSEMBLE
IMPORTANT: Your blender jar and blades are subject to wear during normal use. Always
inspect jar for nicks, chips or cracks. Always inspect blades for broken, cracked or loose
blades. Avoid using the jar or blades if damage.
Contact the Imarex Authorized Service Center to obtain evaluation and repair.
Make sure that the blender is unplugged. Place blender base on clean, dry surface to
keep foreign particles from being pulled up into motor during operation.
1. Put the Blade Assembly (6) into the Jar Support (7).
2. Put the Rubber Packing (5) on the inner edge of the Blade Assembly (6).
3. Attach the Safety Ring (4) into the bottom of the Glass Jar (3).
4. Insert the assembled Jar Support into the bottom of the Glass Jar (3) and turn
clockwise until Glass Jar (3) locks into place.
5. Make sure that the blender is switched OFF.
6. Place the Glass Jar with Blade Assembly on the Motor Base (8) and press down
until securely engaged.
7. Put the Center Lid (1) on the Lid (2).
8. Secure the Lid (2) into the Glass Jar (3) and press down.


Product specificaties

Merk: Imarflex
Categorie: Blender
Model: ICB-500

Heb je hulp nodig?

Als je hulp nodig hebt met Imarflex ICB-500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Imarflex

Handleiding Blender

Nieuwste handleidingen voor Blender