Imarflex ICB-1900PRO Handleiding

Imarflex Blender ICB-1900PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor Imarflex ICB-1900PRO (6 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
SPECIFICATION:
MODEL NO. : ICB-1900PRO
RATED VOLTAGE : 230Va.c. 60Hz
POWER CONSUMPTION : 00 Watts 20
RPM : 30,000 RPM
BOX DIMENSION : 364*264*476mm
UNIT DIMENSION : 225*220*480mm
GROSS WEIGHT : 7.7kg.
UNIT WEIGHT : 6.6kg.
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the convenience outlet
(230Va.c.).
3. Do not use two-way socket with other appliance.
4. Do not abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect
from electrical outlet; instead grasp the plug and pull to disconnect.
5. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner. Return the appliance to any authorized Imarex
Service Center for examination, repair or adjustment.
6. Do not place the unit near gas stove, electric stove or in a heated oven.
7. Put the unit on at surfaced; keep it away from the edge of counter to avoid accident.
8. Keep hands, hair, clothing, as well as utensils out of container while processing to reduce the risk
of severe injury to persons or damage to the appliance. A scraper may be used but only when the
appliance is not running.
9. Children should be supervised to ensure that they do not play with the appliance.
10. This appliance is not intended to be uses by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliances by a person responsible for their safety.
11. Be careful when handing the sharp cutting blades, emptying the bowl and during cleaning.
12. Do not blend hot liquids, doing so may cause excessive pressure build-up, resulting in risk of the
user being burned.
13. To reduce the risk of injury, never operate the appliance without the lid in place.
14. Switch o the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
15. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
16. Do not use this appliance for anything other than its intended use.
17. This appliance is not intended for outdoor use.
18. To protect against electric shock, do not immerse the base in water.
19. The maximum continuous operating time of the blender is minute only. Do not exceed with the one
maximum operating time. It may cause damage to the unit.
20. Blade is sharp, handle it carefully.
21. Do not put the blade assembly on the base without the plastic jar.
22. Do not use the blender if the plastic jar has a crack.
23. Do not use this unit other than its intended use.
24. Save this instruction manual for future reference.
25. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and o by the utility.
DESCRIPTION OF PARTS:
2. Lid
3. Plastic Jar
4. Blade Assembly
5. Jar Socket
Base
8. Rubber Foot
HOW TO ASSEMBLE:
IMPORTANT: Your blender jar and blades are subject to wear dur g normal use. Always in
inspect the jar for nicks, chips or cracks. Always inspect blades for broken, bent or loose
blades. Avoid using the jar or blades damaged if .
Contact the Imarex Authorized Service Center to obtain evaluation and repair.
Make sure that the blender is unplugged. Place blender base on clean, dry surface to
keep foreign particles from being pulled up into motor during operation.
1. Make sure that the top housing pad is properly installed in the motor base.
2. Place the sound reducer cover on the top of top housing pad.
3. Secure and lock the sound reducer cover by turning the sound reducer cover lock
clockwise in both sides.
4. Put the Measuring Cup on the Jar Lid.
5. Secure the Lid into the Plastic Jar and press down.
6. Place the Plastic Jar with Blade Assembly on the Motor Base and press down until
securely engaged.
NO.
DESCRIPTION
NO.
DESCRIPTION
1
Measuring Cup
7
Drive Clutch
2
Jar Lid
8
Top Housing Pad
3
Jar Seal
9
ON/OFF Switch
4
Blade Assembly
10
Speed & Preset Knob Control
5
Plastic Jar
11
Pulse
6
Sound Reducer Cover


Product specificaties

Merk: Imarflex
Categorie: Blender
Model: ICB-1900PRO

Heb je hulp nodig?

Als je hulp nodig hebt met Imarflex ICB-1900PRO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Imarflex

Handleiding Blender

Nieuwste handleidingen voor Blender