Ikan RB10 Handleiding

Ikan Verlichting RB10

Lees hieronder de 📖 handleiding in het Nederlandse voor Ikan RB10 (8 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Rayden

Quick Start Guide

Rayden LED Lights

What’s Included

RB5

RW5

RB10

RW10

1 x Light Fixture

1 x Yoke Mount

1 x Neutral Density Filter

1 x Power Supply with Cable

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re tooﬁlmmakers

Getting to know your Rayden Lights

PRECAUTIONS

• Keep the ﬁxture away from water and all ﬂammable gases or liquids.

• Use ONLY the recommended batteries.

• Handle the unit with care.

• DO NOT attempt to disassemble or repair the unit without ﬁrst contacting the service department at www.ikancorp.com

• Keep the unit clean and free of dust. The unit can be cleaned with a soft, dry cloth.

• Use ONLY parts provided by the manufacturer.

• Always use caution when plugging in the ﬁxture.

Mounting the Rayden to a stand

The Rayden LED Light comes with a pre-installed yoke and combo mount. This allows the ﬁxture to easily sit and adjust on any

stand. The 30° yoke gives the light free-range motion without obstructions. The Baby 5/8“ and Junior 1-1/8” Combo Pin allows

the user a wide range of stands. The light can be mounted either horizontally or vertically on a 5/8” baby pin.

Power the LEDs

The Rayden light comes with an included AC power supply and 6 foot cable. This allows the user to plug into any standard 120-

240v electrical outlet. The Rayden LED light can be powered from either an AB Mount pro battery, or a V-Mount battery. The

ﬁxture comes standard with either AB-Mount or V-Mount plates. The plates can be easily removed and replaced for the type of

batteries that are available.

Adjusting the Color & Brightness of the Light

The Rayden LED light is controlled by the large yellow knob on the rear of the ﬁxture. The knob was designed with the idea that

it could be reached and adjusted when the light is up on a stand. The knob has two push settings.

The default setting is the brightness from 10%-100% brightness.

By pressing in on the knob, the color temperature can be adjusted. (Bi-Color lights)

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re tooﬁlmmakers

Remote Control

The light can be adjusted also using the RF remote control. The use of the remote allows for multiple lights to be connected, as well as

control of the brightness.

Remote Control Button Functions

• Press & Hold “A” for 5 seconds to sync remote control to light(s)

• Press “A” to power ON/OFF (for Daylight Light only)

• Press “A”& "B" to power ON/OFF (for Bi-Color Light only)

• Press “B” to adjust 4 levels of light intensity in increments of 25%

• Press and Hold “B” for 5 seconds to Enable/Disable sound

• Hold down “C” to increase light intensity 0%-100%

• Hold down “D” to decrease light intensity 100%-0%

Optional Accessories

Some other products that work well with the Rayden lights from Ikan include:

HD-STND

ROLLR-STND10

CP-STND-V3

SW-04

KCP-703

Heavy Duty Light Stand

2 Stage Roller Stand 10 ft 6 in

Compact Light Stand Version 3

Safety Wire

Stage Clamp w/ 16mm Stud

Changing the Pro Battery Plate

Adding or removing the pro battery plate on the back of your ﬁxture can be easily achieved.

NOTE: The ﬁxture comes pre-installed with the Gold-Mount battery plate.

The process starts with the removal of the four screws on the four corners of the plate.

Once the screws are removed, separate the plate from the back of the ﬁxture.

Unplug the 2-pin connector from the ﬁxture.

Store the screws and the Gold-Mount in a safe place.

Reattaching the V-Mount plate is a simple process.

Plug the wired 2-pin connector into the ﬁxture where we just unplugged the Gold-Mount plate at the back of the light. Orient the

holes on the plate to match up with the screw holes on the back of the ﬁxture. Using the screws supplied with the V-Mount plate,

screw in the plate until it is snug against the back of the ﬁxture. Do not over-tighten the screws.

You’re now ready to install your battery to the V-Mount plate.

Product specificaties

Merk:	Ikan
Categorie:	Verlichting
Model:	RB10
Kleur van het product:	Zwart
Breedte verpakking:	533.4 mm
Diepte verpakking:	457.2 mm
Hoogte verpakking:	152.4 mm
Materiaal behuizing:	Kunststof
Type stroombron:	AC
Vermogensverbruik (max):	150 W
Vorm:	Vierkant
Aantal per verpakking:	1 stuk(s)
Color Rendering Index (CRI):	95
Stralingshoek:	50 °
Aantal leds:	1184
Licht kleurtype:	Wit
Kleurtemperatuur (max):	5600 K
Lichtopbrengst (max):	4559 lm
Kleurtemperatuur (min):	3200 K