IDIS DA-PI2101 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IDIS DA-PI2101 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
DA-PI2101
PoE Injector
IEEE 802.3at PoE
Power Source Injector,
10/100/1000 Mbps LAN
Operation Manual
Powered by
2
Before Using the Product
FCC Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
User’s Caution Statement
Caution: Any changes or modications to the equipment not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Product Overview
DA-PI2101 is a single port PoE Power Source (PSE) injector that supplies 55V DC power to a
remote network camera via a UTP Ethernet cable. It oers outstanding reliability with low
power consumption and long life span. It is capable of transmitting maximum of 30W of
output for up to 100 meters.
DA-PI2101 is IEEE802.3af and IEEE 802.3at-compliant. It is also equipped with a circuitry
for preventing damages to the device when non-standard or low-voltage PoE devices are
connected to ensure safe operations.
3
Product Features
Up to 30W of PoE Power Feeding on 2-pairs
Compatible with IEEE 802.3af/at
Protects low power devices to receive only the power they need
Automatic detection and protection of non–standard Ethernet terminals
Supports 10/100/1000 Base-T LAN environment
Parallel slide-in design to ease the installation
Accessories
The product consists of the following components.
10A 250V~
Main Unit (DA-PI2101) AC power cable
(conventional 220V)
Operation Manual


Product specificaties

Merk: IDIS
Categorie: Niet gecategoriseerd
Model: DA-PI2101

Heb je hulp nodig?

Als je hulp nodig hebt met IDIS DA-PI2101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IDIS

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd