ID-Tech Omni Handleiding

ID-Tech Geheugenkaartlezer Omni

Lees hieronder de 📖 handleiding in het Nederlandse voor ID-Tech Omni (64 pagina's) in de categorie Geheugenkaartlezer. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/64

Keyboard Wedge

and

USB/Keyboard Wedge

User’s Manual

OMNI

Combined Bar Code

and

Magnetic Stripe Reader

Agency Approved

Speciﬁ cations for subpart B of part 15 of FCC rule for a Class A com-

puting device.

Limited Warranty

ID TECH warrants this product to be in good working order for a

period of one year from the date of purchase. If this product is not in

good working order as warranted above, or should this product fail

to be in good working order at any time during the warranty period,

repair or replacement shall be provided by ID TECH.

This warranty does not cover incidental or consequential damages

incurred by consumer misuse, or modiﬁ cation of said product. For

limited warranty service during the warranty period, please contact

ID TECH to obtain an RMA number and instructions for returning the

product.

formation contained herein is provided to the user as a convenience.

While every effort has been made to ensure accuracy, ID TECH is not

responsible for damages that might occur because of errors or omis-

sions, including any loss of proﬁ t or other commercial damage. The

speciﬁ cations described herein were current at the time of publication,

but are subject to change at any time without prior notice.

ID TECH is a registered trademark of International Technologies &

Systems Corporation. Omni and Value through Innovation are trade-

marks of International Technologies & Systems Corporation.

Table of Contents

Section 1. Introduction

Description 1

Section 2. Installation

Host Connection Step 2

Section 3. Operation

Operating Procedure 3

Section 4. Conﬁ guration 4

Conﬁ guration Setup Procedure 4

Default Settings 6

Terminal Type Selection 6

General Selections 7

Code ID Deﬁnitions 10

Bar Code Message Formatting Selections 11

Magnetic Stripe Formatting Selections 13

Bar Code Selections 15

Magnetic Stripe Selections 28

Reviewing Conﬁ guration Selections 29

Section 5. Data Editing 31

Data Fields 32

Data Editing Formulas 33

The Formula Sequence 34

Using the Data Editing Functions 35

Data Editing Commands 36

Omni Data Flow 41

Examples 42

Section 6. Troubleshooting 45

General Procedures 45

Keyboard Interface Problems 46

Scanning Conﬁ guration Problems 47

Appendix A. Bar Code Default Settings 48

Product specificaties

Merk:	ID-Tech
Categorie:	Geheugenkaartlezer
Model:	Omni
Gewicht:	453.59 g
LED-indicatoren:	Ja
Interface:	PS/2
Temperatuur bij opslag:	-35 - 70 °C
Compatibele besturingssystemen:	Windows 98/2000/ XP\nMac OS
Stroomverbruik:	65 mA
Ondersteunde mediatypen:	ISO 7811, AAMVA, CA DMV, UPC-A, UPC-E, EAN-8, EAN-13, Code 39, Telepen, Interleaved 2/5, Industrial 2/5, Code 128, MSI/Plessey, Codabar
Afmetingen (B x D x H):	52 x 127 x 35 mm
Operating voltage:	5 V
Bedrijfstemperatuur (T-T):	0 - 55 °C
Scansnelheid (max):	76.2 mm/sec