Icom IC-M200 Handleiding

Icom Radio IC-M200

Lees hieronder de 📖 handleiding in het Nederlandse voor Icom IC-M200 (24 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
INSTRUCTION MANUAL
iM200
VHF MARINE TRANSCEIVER
i
READ ALL INSTRUCTIONS carefully and
completely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL This
instruction manual contains important oper ating instructions
for the IC-M200.
WORD DEFINITION
RDANGER! Personal death, serious injury or an
explosion may occur.
RWARNING! Personal injury, re hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No
risk of personal injury, re or electric
shock.
Thank you for choosing this Icom product.
This product is designed and built with Icom’ s state of
the art technology and craftsmanship. With proper care,
this product should provide you with years of trouble-free
operation.
IMPORTANT
EXPLICIT DEFINITIONS
CLEAN THE TRANSCEIVER THOROUGHLY WITH
FRESH WATER after exposure to saltwater, and dry
it before operating. Otherwise, the transceiver's keys,
switches and controllers may become unusable, due to salt
crystallization.
NOTE: If the transceiver’s waterproof protection appears
defective, carefully clean it with a soft, wet (fresh water)
cloth, then, dry it before operating.
The transceiver may lose its waterproof protection if the
case or connector cover is cracked or broken, or the
transceiver has been dropped.
If your vessel requires assistance, contact other vessels and
the Coast Guard by sending a Distress call on Channel 16.
USING CHANNEL 16
DISTRESS CALL PROCEDURE
1. MAYDAY MAYDAY MAYDAY.
2. “THIS IS ...............” (name of vessel).
3. State Your call sign or other description of the vessel
4. “LOCATED AT ...............” (your position).
5. State the nature of the distress and assistance
required.
6. Give any other information which might facilitate the
rescue.
IN CASE OF EMERGENCY
ii
R WARNING! NEVER connect the transceiver to an AC outlet.
This may pose a re hazard or result in an electric shock.
R WARNING! NEVER connect the transceiver to a power source
of more than 16 V DC such as a 24 V battery. This could cause a
re or damage the transceiver.
R WARNING! NEVER reverse the DC power cable polarity when
connecting to a power source. This could damage the transceiver.
R WARNING! NEVER cut the DC power cable between the DC
plug at the back of the transceiver and fuse holder. If an incorrect
connection is made after cutting, the transceiver may be damaged.
R WARNING! NEVER operate the transceiver during a lightning
storm. It may result in an electric shock, cause a re or damage the
transceiver. Always disconnect the power souce and antenna before
a storm.
CAUTION: NEVER place the transceiver where normal operation of
the vessel may be hindered or where it could cause bodily injury.
DO NOT use or place the transceiver in areas with temperatures
below –20°C or above +60°C or, in areas subject to direct sunlight,
such as the dashboard.
DO NOT use harsh solvents such as Benzine or alcohol to clean
the transceiver, as they will damage the transceivers surfaces. If
the transceiver becomes dusty or dirty, wipe it clean with a soft, dry
cloth.
DO NOT disassemble or modify the transceiver for any reason.
BE CAREFUL! The transceiver rear panel will become hot when
operating continuously for long periods of time.
BE CAREFUL! The transceiver and the hand microphone meet
IPX7 requirements for waterproof protection. However, once the
transceiver or the microphone has been dropped, waterproof
protection cannot be guaranteed because of possible damage to
the transceiver or microphone's case or their waterproof seals.
Keep the transceiver at least 1 m away from the ship’s navigation
compass.
PRECAUTIONS
TABLE OF CONTENTS
1. OPERATING RULES 1 .............................................
2. PANEL DESCRIPTION.......................................... 2
3. BASIC OPERATION 4 ..............................................
4. SCAN OPERATION 9 ...............................................
5. DUALWATCH/TRI-WATCH ...................................11
6. SET MODE 12 ..........................................................
7. CONNECTIONS AND MAINTENANCE 14 ..............
8. TROUBLESHOOTING ........................................ 17
9. CHANNEL LIST 18 ...................................................
10. SPECIFICATIONS AND OPTIONS 19 ...................
INDEX...................................................................... 20


Product specificaties

Merk: Icom
Categorie: Radio
Model: IC-M200
Kleur van het product: Zwart
Gewicht: 790 g
Breedte: 153 mm
Diepte: 67 mm
Hoogte: 133 mm
Internationale veiligheidscode (IP): IPX7
Maximumbereik: - m
Frequentie: 156.025 - 162.025 MHz
Bedrijfstemperatuur (T-T): -20 - 60 °C
Type beeldscherm: LCD
Aantal kanalen (totaal): - kanalen

Heb je hulp nodig?

Als je hulp nodig hebt met Icom IC-M200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radio Icom

Handleiding Radio

Nieuwste handleidingen voor Radio