Icom DS-100 Handleiding

Icom Marine DS-100

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Icom DS-100 (36 pagina's) in de categorie Marine. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
offered by Busse-Yachtshop.com
DS-100
DSC CONTROLLER
(#02)
INSTRUCTION MANUAL
DS-100#02-(2) 01.12.13 10:53 AM Page 33 (1,1)
offered by Busse-Yachtshop.com
i
FOREWORD
Thank you for purchasing this Icom product. The DS-100 (#02)
DSC CONTROLLER
is designed and built with Icomā€™s superior
technology and craftsmanship. With proper care this product
should provide you with years of trouble-free operation.
IMPORTANT
READ ALL INSTRUCTIONS carefully and com-
pletely before using the controller.
SAVE THIS INSTRUCTION MANUALā€”This in-
struction manual contains important operating instructions for
the DS-100.
EXPLICIT DEFINITIONS
FEATURES
ā˜žClass D DSC terminal
The DS-100 (#02)
VHF DSC CONTROLLER
is designed as
a ā€˜Class D DSC terminal unitā€™ for the IC-M401EURO or
IC-M503
VHF MARINE TRANSCEIVERS
.
DS-100 (#02) is not compatible with DS-100 (#01). The
plug of the control cable is a different type.
ā˜žSelf ID indication
THE MMSI NUMBER SHOULD BE PROGRAMMED BY
A DEALER PRIOR TO INSTALLATION.
The DS-100 (#02) does not function when there is no ID
programmed. Therefore, the ID code should be checked
in the Set-up menu.
WORD DEFINITION
RWARNING Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE If disregarded, inconvenience only. No risk
of personal injury, ļ¬re or electric shock.
Icom, Icom Inc. and the logo are registered trademarks of
Icom Incorporated (Japan) in the United states, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
DS-100#02-(2) 01.12.13 10:53 AM Page ii (1,1)
offered by Busse-Yachtshop.com
ii
CE Versions of the DS-100 which display the ā€œCEā€
symbol on the serial number seal, comply with the
essential requirements of the European Radio and
Telecommunication Terminal Directive 1999/5/EC.
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands and/or
may be subject to licensing conditions in the country
of use. Be sure to check that you have the correct
version of this radio, or the correct programming for
this radio, to comply with national licensing require-
ments.
RWARNING! NEVER connect the controller to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
RWARNING NEVER transmit a distress call when
your vessel does not need immediate help. Distress calls can
be used only in times of emergency.
NEVER connect the controller to a power source of more
than 16 V DC. Such a connection will ruin the controller.
NEVER place the controller where normal operation of the
ship may be hindered or where it could cause bodily injury.
AVOID using or placing the controller in direct sunlight or in
areas with temperatures below ā€“20Ā°C (ā€“4Ā°F) or above +60Ā°C
(+140Ā°F).
KEEP the controller out of the reach of children.
KEEP the antenna cable and DC power cable as far away
as possible from electrical pumps, generators and other elec-
tronic instruments to prevent instrument malfunctions.
KEEP the controller and microphone at least 1 meter away
from your vesselā€™s magnetic navigation compass.
DO NOT use chemical agents such as benzene or alcohol
when cleaning, as they can damage the terminal unit sur-
faces.
CAUTIONS
DS-100#02-(2) 01.12.13 10:53 AM Page iii (1,1)


Product specificaties

Merk: Icom
Categorie: Marine
Model: DS-100

Heb je hulp nodig?

Als je hulp nodig hebt met Icom DS-100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden