Digital Yacht WL50 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Digital Yacht WL50 (7 pagina's) in de categorie Marine. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
QUICK START WL50-01- VR1
Installation & Quick Start Guide
WL50 Wireless Adaptor/Antenna
www.busse-yachtshop.de | info@busse-yachtshop.de
DIGITAL ALLTEK
WL50 Quick Start Guide
1. Introduction
Congratulations on the purchase of your WL50 Wireless Adaptor/Antenna. This unit is designed for quick amd simple DIY
installation in a touring, permanent or motor caravan (RV). The mounting brackets and suction pads are NOT designed
for safe fixing of the antenna whilst a vehicle is moving and it is strongly recommended that your Wireless antenna is
removed and placed inside the caravan when in motion.
Before operating the unit you should familiarise yourself with the complete user manual supplied with the
product.
2. Before you start
The WL50 comes complete with a CD-ROM that includes all necessary drivers for the following operating systems;
Microsoft Windows XP®, Windows Vista® and Windows 7®
Apple Mac OS X 10.3 and 10.4
Note: Compatible drivers for the WL50 are also included with some LINUX distributions such as the latest version of
Ubuntu. However, due to the wide variety of LINUX distributions available we cannot guarantee that the WL50 will
work on all LINUX computers and suggest that users search for compatibility with the Zydas (ZD1211) or Atheros
(AR5007UG) wireless chipsets that the WL50 uses.
Do not plug in the WL50 to the USB port of your computer until you have inserted the driver CD-ROM.
3. Mounting the WL50 Antenna
The WL50 should be mounted as high as possible and in line of sight with the wireless router that you wish to connect to.
There are two methods of mounting the WL50 using the kit of parts included in the box;
Sucker Cup Mount
Pole Mount
Neither of these two mounting methods should be use when the caravan is in motion.
Sucker Cup Mounting
The most common mounting method is to use the four sucker cups
to temporaily stick the WL50 to the side of the caravan. Insert and
secure a sucker cup in each of the four holes in the aluminium tube
clips, using the supplied clear plastic thumb nuts.
After first ensuring that the surface of the caravan where you wish
to mount the WL50 is clean, lightly moisten each sucker cup and
then gently push the antenna on to the caravan side until the sucker
cups are flat.
This method of mounting is ideal for touring and motor caravans and
the WL50 can stay mounted in this manner for many days see photo.
Removal is quick and simple by gently inserting a finger mail under
each sucker cup and levering them off one by one.
www.busse-yachtshop.de | info@busse-yachtshop.de
DIGITAL ALLTEK
WL50 Quick Start Guide
Pole Mounting
For a more permanent mounting arrangement or when you need to use a pole to get more height, it is possible to mount
the WL50 using the U bolts, nuts and washers supplied.
The diagram below shows the three steps to mounting the WL50 on a suitable pole (up to 50mm in diameter). Please
note that the mounting pole is not supplied.
www.busse-yachtshop.de | info@busse-yachtshop.de


Product specificaties

Merk: Digital Yacht
Categorie: Marine
Model: WL50

Heb je hulp nodig?

Als je hulp nodig hebt met Digital Yacht WL50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden