Husqvarna Rider 316T Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Husqvarna Rider 316T (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
EE
EEnn
nngg
ggll
llii
iiss
sshh
hh
Rider 316T Rider 316T
AWD
Rider 316Ts AWD Rider 316TXs AWD
Oper
ator
ā€²
s manual
Please r
ead the operatorā€™s manual carefully and make sure you
understand the instructions before using the machine.
2
ā€“
English
CONTENTS
Contents
CONTENTS
Contents
...................................................................... 2
Ser
vice journal
Pre-deliv
ery service ..................................................... 3
After the ļ¬rst 8 hours ................................................... 3
INTR
ODUCTION
Dear Customer
, ............................................................ 4
Driving and transport on public roads .......................... 4
Towing .......................................................................... 4
Use .............................................................................. 4
Good service ................................................................ 4
KEY
TO SYMBOLS
Symbols
....................................................................... 5
WHA
T IS WHAT?
What is what on the r
ide-on mower ............................. 7
SAFETY INSTR
UCTIONS
Saf
ety instructions ........................................................ 8
Driving on slopes ......................................................... 9
Children ....................................................................... 10
Maintenance ................................................................ 10
Transport ...................................................................... 11
PRESENT
ATION
Presentation
................................................................. 12
Throttle trigger ............................................................. 12
Choke control ............................................................... 12
Speed limiter ................................................................ 12
Parking brake ............................................................... 12
Cutting unit ................................................................... 12
Lifting lever for the cutting unit ..................................... 13
Cutting height adjustment lever ................................... 13
Lights ........................................................................... 13
Counter ........................................................................ 13
Seat ............................................................................. 13
Fueling ......................................................................... 13
Release lever ............................................................... 14
Driving
Bef
ore starting ............................................................. 15
Start the engine ........................................................... 15
Starting the engine with a weak battery ....................... 16
Driving the Rider .......................................................... 16
Cutting tips .................................................................. 17
Stop the engine ............................................................ 17
Maintenance
Maintenance schedule
................................................. 18
Cleaning ....................................................................... 19
Removing of the machine hoods ................................. 19
Checking and adjusting the steering wires .................. 19
Adjusting the parking brake Rider 316T ....................... 20
Adjusting the parking brake ......................................... 20
Checking and adjusting of throttle wire ........................ 20
Checking and adjusting the choke wire ....................... 21
Replacement of fuel ļ¬lter ............................................. 21
Checking the fuel pumpā€™s air ļ¬lter ................................ 21
Replacing the air ļ¬lter .................................................. 21
Ignition system ............................................................. 22
Check the safety system .............................................. 22
Replacing the light bulbs .............................................. 22
Main fuse ...................................................................... 23
Checking the tyre pressure .......................................... 23
Checking the engineā€™s cooling air intake ...................... 23
Fitting the cutting head ................................................. 24
Removing the cutting unit ............................................. 25
Checking and adjustment of the cutting unitā€™s ground
pressure .......................................................................25
Checking the cutting unitā€™s parallelism ......................... 25
Adjusting the parallelism of the cutting unit .................. 26
Replacing the cutting unit belts .................................... 26
Service position for the cutting unit .............................. 27
Checking the blades ..................................................... 28
Removing the BioClip plug ........................................... 28
Lubrication
Chec
king the engineā€™s oil level. .................................... 29
Changing the oil ļ¬lter ................................................... 29
Checking the transmission oil level .............................. 30
Lubricating the belt adjuster ......................................... 30
General lubrication ....................................................... 30
T
roubleshooting schedule
Storage
Winter stor
age .............................................................. 32
Guard ........................................................................... 32
Service ......................................................................... 32
T
echnical data
EC-declar
ation of conformity ........................................ 35
English
ā€“
3
Ser
vice journal
Pre-deliver
y service
1
Charge the battery for 4 hours at max. 3 amp.
2 Fit steering wheel, seat and any optional
equipment.
3 Check and adjust tyre pressure (60 Kpa, 0.6 bar,
9 PSI).
4 Adjust cutting unit:
Adjust lift springs (effective weight of cutting unit
should be 12-15kg / 26.5-33 lb).
Adjust cutting unit so that rear edge is about 2-4
mm / 1/8ā€ higher than front edge.
Adjust the cutting unitā€™s cutting height setting so
that the connection rod is tensed at the lowest
cutting height.
5 Check that the right amount of oil is in the engine.
6 Check that there is oil in the transmissionā€™s oil
tank.
7 Connect battery.
8 Fill with fuel and start engine.
9 Check that machine does not move in neutral.
10 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
The safety switch for the hydrostat pedals.
11 Check the engine speed See the Technical data
section.
12 Check the synchronisation between the front and
rear wheels. (Only AWD-machines) See the
workshop manual.
13 Tell customer about:
Needs and beneļ¬ts of following the service
schedule.
Servicing and the inļ¬‚uence of this journal on the
second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems.
Certiļ¬ed:
_______________________________________________
Date, mileage, stamp, signature
After the ļ¬rst 8 hours
1
Change engine oil
2 Change the oil in the gearbox. (Only AWD-
machines)
3 Check the synchronisation between the front and
rear wheels. (Only AWD-machines)


Product specificaties

Merk: Husqvarna
Categorie: Niet gecategoriseerd
Model: Rider 316T

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna Rider 316T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Husqvarna

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd