Husqvarna ARFM5100v2 Handleiding

Husqvarna Niet gecategoriseerd ARFM5100v2

Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna ARFM5100v2 (44 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/44
Husqvarna Attachments
Flail mower 547 12 15-02, ARFM5100v2,
547 12 15-01, ARFM5100v3
EN 2-4
DA 4-6
DE 6-9
ES 9-12
FI 12-14
FR 14-17
IT 17-19
NL 19-22
NO 22-24
PT 24-27
SL 27-29
SV 29-32
Made for Husqvarna by Cerruti
Flail mower 547 12 15-01, 547 12 15-02 ARFM5100
Flail mower 547 12 15-01, 547 12 15-02 ARFM5100
Flail mower 547 12 15-01, 547 12 15-02 ARFM5100
Flail mower 547 12 15-01, 547 12 15-02 ARFM5100Flail mower 547 12 15-01, 547 12 15-02 ARFM5100
Intended use
Intended use
Intended use
Intended useIntended use
This attachment is used together with a Husqvarna ride
on mower to shred grass and weed very short. The
attachment can cut rough surfaces that are not flat and
has holes. All other use is incorrect.
Flail mower 547 12 15-01, ARFM5100v3 uses Y-blades
that are used to shred grass.
Flail mower 547 12 15-02, ARFM5100v2 uses hammer-
blades that are used to shred small and medium sized
material of wood.
The manufacturer is not liable for damage caused by
incorrect use.
Symbols on the attachment
Symbols on the attachment
Symbols on the attachment
Symbols on the attachmentSymbols on the attachment
WARNING: Be careful and use the
product correctly. This product can cause
serious injury or death to the operator or
others.
Read the operator's manual carefully
and make sure that you understand
the instructions before you use this
attachment.
Warning: risk of being pulled in by the
blades.
Warning: rotating parts. Keep your hands
away from rotating parts.
Warning: rotating parts. Keep your feet
away from rotating parts.
Warning: risk of crush and/or cut injuries.
STOP
Make sure that all moving parts have
stopped before you do maintenance or
examine the attachment.
Look out for ejecting objects and
ricochets.
Keep bystanders away.
800
1000
Monitor the directions of the blades and
the number of revolutions shown.
GREASE
GREASE
Lubrication.
Attach the product to the lifting points.
Only use approved lifting equipment.
The product agrees with the applicable
EC directives.
This product conforms to applicable UK
regulations.
Use personal pro-
tective equipment
(PPE).
Husqvarna Service Information
Husqvarna Service Information
Husqvarna Service Information
Husqvarna Service InformationHusqvarna Service Information
1. Husqvarna model name
2. Husqvarna product number code (PNC)
2
2
2
22 2377 - 004 - 27.03.2024
Safety instructions for operation
Safety instructions for operation
Safety instructions for operation
Safety instructions for operationSafety instructions for operation
WARNING:
WARNING:
WARNING:
WARNING: WARNING: Read the warning
instructions that follow before you start and
use the attachment.
WARNING:
WARNING:
WARNING:
WARNING: WARNING: Read the operator's
manual of the product and make sure
that you understand the instructions on the
product before you start the attachment
• Always be careful and use your common sense.
Avoid all situations which you consider to be beyond
your capability. If you feel uncertainty about the
operating procedures after you read the operator's
manual, consult an expert before you continue.
• Learn how to use the attachment and its controls
safely and learn how to stop the product quickly.
Learn to recognize the safety decals.
Safety decals can be found on the attachment and
in this manual. Refer to
Symbols on the attachment
on page 2
. If a safety decal on the attachment is
damaged or missing, replace the safety decal.
• Do not let children or other persons not approved for
operation of the attachment to use or do servicing on
it. Local laws may regulate the age of the user.
• Do not keep passengers on the attachment.
• Do not use an attachment with safety devices that
are damaged or do not operate correctly. Replace
the safety devices if necessary.
• Do not use the attachment if persons, especially
children, or animals, are within 50 m of the product.
• Always disengage the PTO button, apply the parking
brake and stop the engine on the product before
attaching the attachment. Make sure that the product
and the attachment are stable.
WARNING:
WARNING:
WARNING:
WARNING: WARNING: Be careful when
attaching the attachment to the product,
risk of crush injury. Use protective
gloves.
• Examine the work area and remove all loose objects.
• Do a check of the safety devices before you operate
the attachment.
• Do a test of all the functions of the attachment before
you operate the attachment.
• Do not let the product stay unsupervised with the
engine on. Always disengage the PTO button, apply
the parking brake and stop the engine before you let
the product stay unsupervised.
• Do not use the attachment if it is damaged or does
not operate correctly.
• Do not overload the attachment capacity by
operating the attachment at too fast a rate.
• Adjust the speed of the attachment based on
the type and height of the material that is to be
shredded.
• Operate the attachment at the correct RPM to
avoid damage or excessive vibrations. Refer to the
Appendix.
• Stop and examine the attachment if you operate the
product across or into an object. If it is necessary,
make repairs before you start.
• If the attachment starts to vibrate more than usual,
stop the engine and examine the cause immediately.
Safety instructions for maintenance
Safety instructions for maintenance
Safety instructions for maintenance
Safety instructions for maintenanceSafety instructions for maintenance
WARNING:
WARNING:
WARNING:
WARNING: WARNING: Read the warning
instructions that follow before you do
maintenance on the attachment.
• Only do the maintenance described in this operator's
manual. More extensive work must be carried out by
an authorized servicing dealer.
WARNING:
WARNING:
WARNING:
WARNING: WARNING: Unauthorized
modifications and/or accessories may
lead to serious injury or death to the
user or others. Under no circumstances
may the design of the attachment be
modified without the permission of the
manufacturer. Always use original spare
parts. Your warranty may not cover
damage or liability caused by the use
of non-authorized accessories or spare
parts.
• The maintenance procedures described in this
operator's manual must be done regularly. Refer to
the Appendix.
• Disengage the PTO button, apply the parking brake
and stop the engine on the product before you do
maintenance on the attachment. Make sure that the
product and the attachment are stable.
• Make sure that all moving parts have stopped before
you examine the attachment.
• Do a check of the safety devices regularly. If the
safety devices are missing or damaged, speak to
your authorized servicing dealer.
• Do not make modifications on safety devices.
• Make sure that all nuts and bolts are tightened
correctly and that the attachment is in good
condition.
• Regularly examine and adjust the bolts on the
blades of the attachment.
• Replace the belts when they are worn or damaged.
Refer to the Appendix. Use the belt type XPA 857.
• Keep the attachment clean to make sure that you
can clearly read signs and stickers.
• Use compressed air to clean the attachment.
2377 - 004 - 27.03.2024 3
3
3
33

Product specificaties

Merk: Husqvarna
Categorie: Niet gecategoriseerd
Model: ARFM5100v2

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna ARFM5100v2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Husqvarna

Husqvarna

Husqvarna B330X Handleiding

30 September 2024
Husqvarna

Husqvarna B220X Handleiding

30 September 2024
Husqvarna

Husqvarna ARFM5100v2 Handleiding

5 September 2024
Husqvarna

Husqvarna 318iS20 Handleiding

7 Augustus 2024
Husqvarna

Husqvarna ARDT5150Xv1 Handleiding

11 Juni 2024
Husqvarna

Husqvarna 40-C1000X4 Handleiding

11 Juni 2024
Husqvarna

Husqvarna ARBR5131Xv1 Handleiding

8 April 2024
Husqvarna

Husqvarna 40-B220X Handleiding

5 Maart 2024
Husqvarna

Husqvarna 301SM Handleiding

15 Augustus 2023
Husqvarna

Husqvarna 320SM Handleiding

15 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Cherry

Cherry SPOS G86-61411 Handleiding

17 November 2024
Cherry

Cherry MX Board 8.0 Handleiding

17 November 2024
Cherry

Cherry Advanced Performance Line G81-8904 Handleiding

17 November 2024
Air Guard

Air Guard AG-1600 Handleiding

17 November 2024
Leviton

Leviton 41089-4WP Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 74336 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 277515 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 114812 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 292286 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 291521 Handleiding

17 November 2024