Husqvarna K 7000 Chain Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna K 7000 Chain (104 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 219 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/104
K 7000 Chain
EN Operator's manual 2-25
FR Manuel d'utilisation 26-51
NL Gebruiksaanwijzing 52-76
DE Bedienungsanweisung 77-102
Contents
Contents
Contents
ContentsContents
Introduction..................................................................... 2
Safety..............................................................................4
Assembly...................................................................... 10
Operation...................................................................... 11
Maintenance................................................................. 17
Troubleshooting............................................................ 21
Transportation, storage and disposal........................... 22
Technical data.............................................................. 23
EC Declaration of Conformity....................................... 25
Introduction
Introduction
Introduction
IntroductionIntroduction
Product description
Product description
Product description
Product descriptionProduct description
This Husqvarna K 7000 Chain is a portable handheld
cut-off machine. To operate the product, connect the
product to the necessary power pack.
Intended use
Intended use
Intended use
Intended useIntended use
This product is used to cut hard material as masonry
and steel. Do not use the product for other tasks.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Note:
Note:
Note:
Note: Note: National regulations can limit the operation of the
product.
Product overview
Product overview
Product overview
Product overviewProduct overview
15
16
1
23
4
11
17
18
19
12
14
13 20
21
9
8
7
6
5
10
1. Rear handle
2. Front handle
3. Hand guard
4. Transmission cover
5. Guide bar and diamond chain (not supplied)
6. Display
7. Power trigger lockout
8. Power trigger
9. Information and warning decal
10. Diamond chain tensioner
2
2
2
22 1455 - 003 - 03.03.2020
11. Spray guard
12. Bar nuts
13. Keyway, 7 splines
14. Rating plate
15. Power pack connection
16. Water connection inlet with water valve
17. Combination wrench
18. Water connectors
19. Keyway, 9 splines
20. Husqvarna high frequency power pack (necessary,
not supplied)
21. Operator's manual
Symbols on the product
Symbols on the product
Symbols on the product
Symbols on the productSymbols on the product
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
Personal protective
equipment on page 6
.
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Sparks from the guide bar and the diamond
chain can cause fire in fuel, wood, clothes,
dry grass or other flammable materials.
Kickbacks can be sudden, rapid and violent
and can cause life threatening injuries. Read
and understand the instructions in the
manual before using the product. Refer to
Kickback on page 11
.
Make sure that the diamond chain does not
have cracks or other damages.
Do not use diamond chains to cut wood.
This product complies with applicable EC
Directives.
Environmental mark.
Environmental mark.
Environmental mark.
Environmental mark.Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at a recycling location for
electrical and electronic equipment.
Note:
Note:
Note:
Note: Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Rating plate
Rating plate
Rating plate
Rating plateRating plate
Husqvarna K7000 Chain
HID 970449701 4NE
2019 472000402
Husqvarna AB
561 82 Huskvarna SWEDEN
5500W 8800rpm 16 /450mm
Made in Sweden
Row 1: Brand, model
Row 2: Product id
Row 3: Manufacturing year, serial number
Row 4: Manufacturer
Row 5: Manufacturer address
Row 6: Output power, output shaft rpm, cutting
attachment maximum size
Row 7: Country of origin
Product liability
Product liability
Product liability
Product liabilityProduct liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
1455 - 003 - 03.03.2020 3
3
3
33


Product specificaties

Merk: Husqvarna
Categorie: Niet gecategoriseerd
Model: K 7000 Chain

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna K 7000 Chain stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Husqvarna

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd