Hubsan H501A X4 Handleiding

Hubsan Drone H501A X4

Lees hieronder de 📖 handleiding in het Nederlandse voor Hubsan H501A X4 (28 pagina's) in de categorie Drone. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
®
H501A
PLEASE READ THE MANUAL CAREFULLY BEFORE USE.
《User Manual》
1.Quad + Phone/Pad
2.Quad + Phone +Relay
3.Quad + Transmitter
+
+
+
or
Caution:
For safety, the quadcopter is default set to CAN NOT FLY WHEN NO GPS. If you prefer to
fly when GPS is not available, please reset the value as instructed below before using.
Pull the throttle stick to the lowest position and press the Elevator stick for 1.5 seconds to
enter into the MAIN MENU interface. Push the Elevator stick up/down to select “Fly When
no GPS”, push the stick right to enter into the “ Fly When no GPS” interface, select “YES”.
The Default Setting is “NO.Select “Exit” to exit.
Compass calibration is required after the binding as instructed on the
transmitter.
1 ) Horizontally rotate the X4 in a clockwise direction when the LCD screen shows Calib
compass 1”
2 ) Put the X4 nose down and vertically rotate it in a clockwise direction when the LCD screen
shows “Calib compass 2”
3 ) Calibration is completed when the 4 LED indicators remain solid.
结束开始
当显示屏显示“Calibratecompass1”
时请水平旋转飞行器“
当遥控器显示屏显示
“Calibratecompass2”时。
请垂直旋转飞行器
Horizontally rotate the X4 in a
clockwise direction when the LCD
screen shows “Calib compass 1”
Put the X4 nose down and vertically
rotate it in a clockwise direction
when the LCD screen shows “Calib
compass 2”
Start Complete


Product specificaties

Merk: Hubsan
Categorie: Drone
Model: H501A X4

Heb je hulp nodig?

Als je hulp nodig hebt met Hubsan H501A X4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Drone Hubsan

Handleiding Drone

Nieuwste handleidingen voor Drone