Hotpoint HSZ12A2D Handleiding

Hotpoint Vriezer HSZ12A2D

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint HSZ12A2D (10 pagina's) in de categorie Vriezer. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/10
Instructions for use
3
ENGLISH Instructions for use Page 4
Always disconnect the appliance from the power supply before replacing the light bulb. Then follow
the instructions based on the type of light bulb for your product.
Replace the light bulb with one with the same features, available from the Technical Assistance Service
and authorised sellers.
Light type 1)
To remove the light bulb, unscrew it in an anti-clockwise direction, as
shown in the figure. Wait 5 minutes before reconnecting the appliance.
- traditional light bulb (max 25W)
or
- LED light bulb (with the same features)
only available from the Technical Assistance Service
Light type 2)
If the product has LED lights, as demonstrated in the figures below, contact the Technical Assistance
Service if you need a replacement.
LEDs last longer than traditional light bulbs, improve internal visibility and are environmentally-friendly.
4
Clean the appliance occasionally with a cloth and a solution of warm
water and neutral cleaning agents specifically for cleaning the inside
of the refrigerator. Do not use abrasive cleaning agents. To ensure
the constant and correct flow of the defrosting water, regularly clean
the inside of the drain situated in the back wall of the refrigerator
compartment near the fruit and vegetable drawer using the utensil
provided (see figure).
Before carrying out any maintenance or cleaning, take the plug out of the socket or disconnect the
appliance from the power supply.
Connect the appliance to the power supply.
In models with electronics, a sound signal may be emitted, which means that the temperature alarm
has been activated: press the sound alarm off button. Where provided, position the antibacterial anti-
odour filter in the fan as demonstrated in the filter packaging.
Note: After turning the appliance on, you must wait for 4-5 hours for the correct storage temperature
to be reached for a normally filled appliance.
USING FOR THE FIRST TIME
MAINTENANCE AND CLEANING
OF THE APPLICANCE
REPLACING THE LIGHT BULB OR LED
(depending on the model)
Light bulb
LED light bulb

Product specificaties

Merk: Hotpoint
Categorie: Vriezer
Model: HSZ12A2D

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint HSZ12A2D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Vriezer Hotpoint

Hotpoint

Hotpoint HABUFZ011 Handleiding

2 December 2024
Hotpoint

Hotpoint UH8 F2C W Handleiding

2 December 2024
Hotpoint

Hotpoint BF 901 E AA Handleiding

2 December 2024
Hotpoint

Hotpoint HUF13LTRWW Handleiding

23 Juli 2024
Hotpoint

Hotpoint HBC18 5050 F1 Handleiding

19 Juli 2023
Hotpoint

Hotpoint H7NT 911T W H 1 Handleiding

17 Juli 2023
Hotpoint

Hotpoint RLA36G 1 Handleiding

8 Juli 2023
Hotpoint

Hotpoint UH8 F1C G UK 1 Handleiding

29 Juni 2023
Hotpoint

Hotpoint H5T 811I MX H 1 Handleiding

29 Juni 2023
Hotpoint

Hotpoint H5X 82O SX Handleiding

28 Juni 2023

Handleiding Vriezer

Nieuwste handleidingen voor Vriezer

Svan

Svan SCV145501E Handleiding

20 December 2024
Svan

Svan SCH4001EDC Handleiding

20 December 2024
Mitsubishi

Mitsubishi MR-BF325EK Handleiding

14 December 2024
Mitsubishi

Mitsubishi MR-CGX370EP Handleiding

14 December 2024
Mitsubishi

Mitsubishi MR-FX420EP Handleiding

14 December 2024
Midea

Midea MDRC207FZG01-SG Handleiding

14 December 2024
Hyundai

Hyundai CFHN100SH4WF1 Handleiding

14 December 2024
Hyundai

Hyundai VFHN-19NL1XE0 Handleiding

14 December 2024
Hyundai

Hyundai FSB050WW8E Handleiding

14 December 2024
Hitachi

Hitachi F-C316AM1 Handleiding

13 December 2024