Hori NSW-118E Handleiding

Hori Controller NSW-118E

Lees hieronder de 📖 handleiding in het Nederlandse voor Hori NSW-118E (1 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Thank you for purchasing this product.

Before using this product please read the instructions carefully.

After reading the instruction manual, please keep it for reference.

Instruction manual

● Keep this product out of the reach of children under 3.

● Choking Hazard.

● Keep the controller away from dusty or humid areas.

● Do not use this product if damage or alteration occurs.

● Do not get wet.

● Do not leave in hot environment for a long time.

● Do not touch the metal parts of USB plug.

● Do not apply strong impact or weight on the product.

● Do not pull roughly or bend the cable of the controller.

● Never disassemble, repair or modify this product.

● If product needs cleaning, use only a soft dry cloth.

Do not use any chemical agents like benzine or thinner.

● Do not use this product for anything other than its

intended purpose.

We are not responsible for any accidents or damages

in the event of use other than the intended purpose.

Caution

Controller： × 1 Instruction manual： × 1

Included

Layout

TURBO LED USB Connector

ZR Button

Left Stick

(Functions as a button when

pressed down.)

Control Pad Capture Button TURBO Button HOME Button

Controller cable

Right Stick

(Functions as a button when

pressed down.)

B Button A Button X Button Y Button

Button + Button

L Button ZL Button R Button

Nintendo Switch

TURBO LED USB Connector

RB Button

Left Stick

(Functions as a button when

pressed down.)

Control Pad No function TURBO Button GUIDE Button

Controller cable

Right Stick

(Functions as a button when

pressed down.)

B Button A Button X Button Y Button

BACK Button START Button

LT Button LB Button RT Button

To Nintendo SwitchT M

Dock USB port.

Please insert the USB connector of the controller into the USB port of the Nintendo Switch

Dock.

How to connect

Main Features

■ Dimensions : 4.0 in (W) x 5.5 in (D) x 2.7 in (H)

■ Cable length : 9.8 ft ■ Weight : 0.5 lbs

■ Rating 45mA : 5V

Nintendo SwitchTM / PC(Xinput)

Platform

Windows®10 ／8∼8.1 ／7 Supported OS

USB Port, Internet ConnectionSystem requirements

Important

* This product is not a wireless controller.

* Do not use the Turbo Function in the HOME Menu.

Make sure that your Nintendo Switch

TM is updated with the latest system software.

The Turbo hold function allows continuous rapid ire without having to hold the button.

(Pressing the assigned button deactivates this).

* Control Pad (UP, DOWN, LEFT or RIGHT) are not compatible with the Turbo hold mode,

and can only be used to set Turbo mode.

The following buttons can be set to Turbo or Turbo hold mode:

A Button / B Button / X Button / Y Button / L Button / R Button / ZL Button / ZR Button /

Control Pad (UP / DOWN / LEFT / RIGHT)

How to use the Turbo Functions

TURBO Button

Turbo OFF

* The Turbo LED flash rate corresponds to the Turbo speed and will flash as long as one of the button is in Turbo mode.

* By pressing the HOME Button, all Turbo function and Turbo hold settings will be deactivated.

When restarting game play, you will need to set the Turbo function again.

* Turbo Function may not be compatible with all software titles. Please try adjusting the Turbo settings or simply turn OFF TURBO.

* Turbo function will deactivate when you unplug the USB connector.

Turbo IndicatorSetting method

Turbo Mode

OFF

(All buttons)

Hold down the Turbo button and

then press the button that you

want to set to Turbo mode.

TURBO Button

Turbo Hold

Press the button once more,

and the button will remain

in Turbo (Turbo Hold).

Pressing the button again

once more will deactivate

the Turbo function.

Hold the TURBO Button and

press the SELECT Button.

OFF

Button OFF

TURBO LED will lash.

（Green or Orange）

Button ON

TURBO LED will turn on.

（Green or Orange）

Button OFF

TURBO LED will turn on.

（Green or Orange）

Button ON

TURBO LED will lash.

（Green or Orange）

TURBO Button

Button

In the case that after deactivating the turbo

function, the turbo Indicator LED does not

turn off, this means that there is still a button

set to Turbo/Turbo Hold.

※ LED will turn red while L/R and ZL/ZR button

functions are switched.

If you forget which buttons you have set to

Turbo mode, deactivate them all and reassign,

as you require.

※ LED will turn red while L/R and ZL/ZR button

functions are switched.

You can adjust the Turbo mode to 3 different speeds.

While pressing the Turbo Button, push up on the Right Analog Stick

to change the Turbo speed in the following order :

5 times/second → 10 times/second → 20 times/second

While pressing the Turbo Button, push down on the Right Analog Stick

to change the Turbo speed in the following order :

20 times/second → 10 times/second → 5 times/second

How to change Turbo Speed

* Turbo speed is set to 10 times/second by default.

* Right Stick must be returned to the neutral position before changing to the next turbo speed.

* The Turbo LED will lash at a rate corresponding to the Turbo speed for 2 seconds.

Warranty

HORI warrants to the original purchaser that the product purchased new in its original packaging shall be free of any defects

in material and workmanship for a period of 90 days from the original date of purchase. If the warranty claim cannot be

processed through the original retailer please address directly to HORI at infous@hori.jp.

Please visit http://stores.horiusa.com/policies/ for warranty details.

PRODUCT DISPOSAL INFORMATION

Where you see this symbol on any of our electrical products or packaging, it indicates that the relevant

electrical product or battery should not be disposed of as general household waste in Europe.

To ensure the correct waste treatment of the product and battery, please dispose of them in accordance

with any applicable local laws or requirements for disposal of electrical equipment or batteries. In so doing,

you will help to conserve natural resources and improve standards of environmental protection in treatment

and disposal of electrical waste. Applicable to EU countries only.

THE FCC WANTS YOU TO KNOW

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with theinstructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

Warranty

For all warranty claims made within the irst 30 days after purchase, please check with the retailer where the original

purchase was made for details. If the warranty claim cannot be processed through the original retailer or for any other

inquiries pertaining to our products, please address directly to HORI at infoeu@hori.jp.

Please retain contact information for future reference.

The image on the package may differ from the actual product.

The manufacturer reserves the right to change the product design or speciications without notice.

The wires are not to be inserted into socket-outlets.

The packaging must be retained since it contains important information.

HORI & HORI logo are registered trademarks of HORI.

The normal function of the product may be disturbed by strong electro-magnetic interference.

If so, simply reset the product to resume normal operation by following the instruction manual (How to connect).

In case the function does not resume, please relocate to an area which does not have electro-magnetic interference

to use the product.

Switch functions between L/R and ZL/ZR buttons.

* Setting will remain even after you unplug or turn the power off.

* Repeat the process to reset the button settings.

* Buttons will switch when you turn on the Nintendo Switch while the USB is plugged and ZL/ZR buttons are simultaneously pressed.

How to switch

L/R to ZL/ZR Toggle Function

L Button

ZL Button

R Button

ZR Button

TURBO LED will turn off.

TURBO LED (RED) will turn on.

L Button

ZL Button

R Button

ZR Button

Press and hold the ZL and ZR buttons simultaneously and connect the USB connector to

the Nintendo SwitchTM

Dock USB port.

To Nintendo Switch T M Dock USB port.

Product specificaties

Merk:	Hori
Categorie:	Controller
Model:	NSW-118E
Kleur van het product:	Blue,Red,White
Gewicht:	226 g
Breedte:	102 mm
Diepte:	140 mm
Hoogte:	69 mm
Snoerlengte:	3 m
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Stroom:	0.045 A
Connectiviteitstechnologie:	Bedraad
Plug and play:	Ja
Ingangsspanning:	5 V
Ergonomische grip:	Ja
Soort apparaat:	Gamepad
Aantal knoppen:	16
Aansluiting:	USB
Aantal producten inbegrepen:	1 stuk(s)
Gaming controle technologie:	Analoog
Gaming platforms ondersteund:	Nintendo Switch
Gaming controle functie toetsen:	Home button,Start button,Turbo button
Schouder knopen:	Ja