Honeywell THP2400A1050 Handleiding

Honeywell Thermostaat THP2400A1050

Lees hieronder de đź“– handleiding in het Nederlandse voor Honeywell THP2400A1050 (12 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
INSTALLATION INSTRUCTIONS
33-00069EFS-04
Smart Round Thermostat Cover
Plate
TH8732 SMART ROUND THERMOSTATS AND COVER
PLATES ARE NO LONGER AVAILABLE
APPLICATION
Use the THP2400A1043 wall cover assembly with the Smart Round Thermostat.
Use the THP2400A1043 wall cover assembly to cover marks on the wall or to mount the thermostat to a 2 in. x 4
in. electrical box.
The THP2400A1043 wall cover assembly contains one wall cover, one bracket, two #6-32 x 5/8" flat head screws
and two #6-32 x 3/8" pan head screws. See Fig. 1.
Fig. 1. THP2400A1043 wall cover assembly.
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous
condition.
2. Check ratings given in the instructions and on the product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.
TWO #6-32 X 5/8 FLAT HEAD SCREWS
TWO #6-32 X 3/8 PAN HEAD SCREWS
BRACKET
6-3/8 (162)
3/4
(19)
M35406
SMART ROUND THERMOSTAT COVER PLATE
33-00069EFS—04 2
CAUTION
Electrical Hazard.
Can cause electrical shock or equipment damage.
Disconnect power before beginning installation.
Mount Wall Cover
Mount Wall Cover Directly to Wall (See Fig. 2)
1. Pull the wires through the wire hole on the wall cover.
2. Position the wall cover on the wall with the arrow pointing up. Check that the wall cover is leveled (for
appearance only).
3. Use a pencil to mark the mounting holes.
4. Remove the wall cover from the wall and proceed as follow:
• For drywall: Drill two 3/16-in. holes in the wall as marked. Tap the wall anchors (provided with the
thermostat) into the holes, until the anchor collar touches the wall.
• For harder surface such as plaster: Drill two 7/32-in. holes in the wall as marked. Tap the wall anchors
(provided with the thermostat) into the holes, until the anchor collar touches the wall.
5. Position the wall plate on the wall cover using the 4 mounting posts and snap them together.
6. Pull the wires through the wire hole on the wall cover / wall plate assembly. Position the assembly on the
wall anchors.
7. Insert the mounting screws (provided with the thermostat) into the wall anchors. Check leveling, if desired,
and tighten the mounting screws.
Fig. 2. Mount wall cover, wall plate and thermostat directly to wall.
MOUNTING SCREWS (2)
(PROVIDED WITH
THERMOSTAT)
M35407
G
R
C
a
Y
R
WIRE HOLE
WALL COVER MOUNTING HOLES (2)
THERMOSTAT
WIRE HOLE
WALL PLATE
MOUNTING HOLES (2)
WALL
OPENING
WALL ANCHORS (2)
(PROVIDED WITH
THERMOSTAT)
DRILLED
HOLES (2)
WALL
WIRE
AUX
O/B
L
C
W
W
2
U
2
U
1
1 Wire
2 Wire
Universal
Hum
Dehum
Vent
K
R
R & RC
MOUNTING POSTS (4)
SMART ROUND THERMOSTAT COVER PLATE
3 33-00069EFS—04
Mount Wall Cover to a Vertical 2 in. x 4 in. Electrical Box (See Fig. 3)
1. Position the bracket on the electrical box with the arrow pointing up. Insert two #6-32 X 5/8" flat head
screws. Level the bracket and tighten the flat head screws.
2. Position the wall plate on the wall cover using the 4 mounting posts and snap them together.
3. Pull the wires through the wire hole on the wall cover / wall plate assembly. Position the assembly on the
bracket.
4. Insert two #6-32 X 3/8" pan head screws. Check leveling, if desired, and tighten the pan head screws.
Fig. 3. Mount bracket, wall cover, wall plate and thermostat to a vertical 2 in. x 4 in. electrical box.
#6-32 X 5/8 FLAT
HEAD SCREWS (2)
BRACKET
ELECTRICAL
BOX
#6-32 X 3/8” PAN
HEAD SCREWS (2)
M35408
G
R
C
Y
a
Y
R
WIRE HOLE
MOUNTING HOLES (2)
THERMOSTAT
WIRE HOLE
WALL PLATE
MOUNTING HOLES (2)
WIRE
AUX
O/B
L
C
W
W
2
U
2
U
1
1 Wire
2 Wire
Un ivers al
H um
Dehu m
Vent
K
MOUNTING POSTS (4)
WALL
COVER

Product specificaties

Merk: Honeywell
Categorie: Thermostaat
Model: THP2400A1050

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell THP2400A1050 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Thermostaat Honeywell

Honeywell

Honeywell T4 Pro TH4110U2005 Handleiding

10 Juni 2024
Honeywell

Honeywell RTH9585WF Handleiding

27 Februari 2024
Honeywell

Honeywell BACnet TB3026B Handleiding

2 September 2023
Honeywell

Honeywell RTH221B1039/U1 Handleiding

9 Juli 2023
Honeywell

Honeywell RTH2410B1019/E1 Handleiding

7 Juli 2023
Honeywell

Honeywell RTH6580WF1001/U1 Handleiding

7 Juli 2023
Honeywell

Honeywell RTH111B1024/E1 Handleiding

6 Juli 2023
Honeywell

Honeywell RTH2300B1038/E1 Handleiding

6 Juli 2023
Honeywell

Honeywell Home THM6000R7001/U Handleiding

4 Juli 2023
Honeywell

Honeywell T4398B1003/U Handleiding

4 Juli 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Techno Line

Techno Line TM 3010 Handleiding

18 November 2024
Ferguson

Ferguson FS1TH Handleiding

17 November 2024
EQ-3

EQ-3 HM-RC-19 Handleiding

16 November 2024
EQ-3

EQ-3 CC-RT-N Handleiding

16 November 2024
Delta Dore

Delta Dore TYDOM 1.0 Handleiding

16 November 2024
Delta Dore

Delta Dore Tybox 5701 FP Handleiding

16 November 2024
Delta Dore

Delta Dore Tybox 33 Handleiding

16 November 2024
Delta Dore

Delta Dore Tybox 5702 FP Handleiding

16 November 2024
Delta Dore

Delta Dore Tybox 31 Handleiding

16 November 2024
Delta Dore

Delta Dore TYBOX 827 W RF Handleiding

16 November 2024