Honeywell T6651E Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell T6651E (4 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
EN0R8505 R1 11/98
T6651E
CM27 OEM 7-DAY
CHRONOTHERM
PRODUCT SPECIFICATION SHEET
The CM27 OEM 7 -Day Chronotherm
can be customised for equipment
manufacturers.
It is designed to provide automatic time
and temperature control of heating and
cooling systems in villas and
apartments.
The controller is based on a new
philosophy of human interface design,
developed in conjunction with a leading
university specialising in the field of
ergonomic research.
The CM27 OEM 7 -Day is designed for
European CEN approval.
FEATURES
Attractive modern styling, making it ideal for location
in any type of home
7-day program
Up to 4 level changes per day
10 minute program resolution
Program switch time disable
5 to 30oC setpoint range with 0.5oC increments
24 hour or 12 hour AM/PM format
Proportional plus Integral (P+I) digital control form for
accurate temperature performance
Room temperature inquiry
Temporary setpoint override
Programmable frost protection, 5 to 10oC for
unoccupied periods
Battery powered by 2 AA size (LR6) alkaline cells
4 year battery life with low battery warning
24...230 V SPST potential free contacts for simple
2-wire installation
5 A resistive, 2 A inductive switch rating
Heating or cooling control
System selection links for optimum control
performance
Manual mode for use as a simple thermostat
Easy-to-use programming controls
Built-in default program
Brief programming instructions located inside cover
Surface or wallbox mounting options
Wide range of customisation possibilities
T6651E CM27 OEM 7-DAY CHRONOTHERM
EN0R 8505 R1 11/98
DIMENSIONS
80mm
41mm
145mm
130mm
SPECIFICATIONS
Batteries
:
2 x 1.5 V IEC LR6 (AA) Alkaline cells
Battery life : 4 year minimum (Duracell MN1500)
Battery
replacement
: 1 minute memory retention
Switch type : SPST (potential free) SPDT also
available
Electrical rating : 230 V~, 50...60 Hz, 0.1 A to 5 A resistive;
0.1 A to 2 A inductive (0.6 pf)
24 V~, 50...60 Hz, 0.5 A to 5 A resistive
0.5 A to 2 A inductive (0.6 pf)
Time display : 24 hour or 12 hour AM/PM format
Time keeping
accuracy
: Better than 10 minutes per year
Program : 7-day with 4 daily independent setpoints
Time setting
resolution
: Time of day - 1 minute
Program - 10 minute steps
Temperature
setting range
:
Program -5 to 30
o
C in 0.5 K steps
Frost - 5 to 10o C in 0.5 K steps
Temperature
control accuracy
: ±0.5 K (nominal) @ 20oC, 50% load
3 K /hour
Control form : P + I (Proportional + Integral)
Minimum
ON/OFF period
: 10% of cycle rate (1 minute minimum)
Cycle rate Selectable by application (see table
below)
Wiring : Terminal block capable of accepting wires
up to 2.5 mm2
Wire access : Mains wiring - rear, right or below
Low voltage wiring - rear, left or below
Dimensions : 130 x 80 x 41 mm (w x h x d)
130 x 145 x 41 mm (w x h x d) (flap open)
Environmental : Operating temperature range 0 to 40
oC
Shipping and storage temperature range -
20 to 55oC
Humidity range 0 to 90% rh, non-
condensing
Approvals : Designed to meet European CEN
approvals
APPLICATION CONTROL
Application Cycle Rate Link (LK1,LK2)
Boiler Heating 6 as supplied
Air Heating 6 cut LK1
Air Cooling* 3 cut LK1
Heatpump Heating 6 cut LK2
Heatpump Cooling* 3 cut LK2
Electric Heating 12 cut LK1 +LK2
Thermal Actuator 12 cut LK1+LK2 *Refer to the note on Cooling System Control on page 4
T6651E CM27 OEM 7-DAY CHRONOTHERM
3 EN0R 8505 R1 11/98
LOCATION
The CM27 OEM Chronotherm is the temperature control
element in the heating/cooling system and MUST be located
in a position with good air circulation at average room
temperature on an inside wall 1.5 meters above the floor
level. Do not position the CM27 OEM Chronotherm near
sources of heat (radiators, hot air vents, TV or lights), near
doors or windows, or in direct sunlight.
MOUNTING
The CM27 OEM Chronotherm can be mounted directly on the
wall surface or on an electrical wallbox.
WIRING
The CM27 OEM Chronotherm is designed for fixed wiring
only and must be installed in accordance with latest l.E.E.
regulations. Ensure the wiring connection to the supply is via
a fuse rated at no more than 5 amps and a Class "A" switch
(having contact separation of at least 3 mm in all poles).
IMPORTANT
1. The installer must be a trained service engineer
2. Disconnect the power supply before beginning
installation
INSTALLATION
ORDERING SPECIFICATION
Model Logo Carlton Literature
T6651E1003 None Plain white English
NOTE: The model shown opposite can be ordered as
samples to establish the exact customisation
requirements
CUSTOMISATION POSSIBILITIES
Customer's logo in single or multi-colours
Customer's logo on literature
Additional language flap labels
Six level changes per day
Screws for easy installation
Holiday mode
Carton: single colour
printing multi colour
full colour
Alternative relay ratings including SPDT version


Product specificaties

Merk: Honeywell
Categorie: Thermostaat
Model: T6651E

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell T6651E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Honeywell

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat