Honeywell RCHW3610WF1001 Handleiding

Honeywell Alarmsysteem RCHW3610WF1001

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell RCHW3610WF1001 (24 pagina's) in de categorie Alarmsysteem. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
WIFI® WATER LEAK AND
FREEZE DETECTOR
Installation Guide
CHW3610W, CHWES4,
RCHW3610WF,
RCHWES4
Read and save these instructions
Need help?
www.resideo.comWeb:
1-800-468-1502Phone:
2
1 Download the Honeywell Home app
Search for Honeywell Home in the App
Store or Google Play.
After downloading, launch the app,
register (if necessary), go to , and Menu
then go to .Add New Device
2 Install batteries
The detector is powered by 3 AA batteries (included). Open the battery
cover on the detector and install the batteries.
When replacing the cover, press firmly
around the edges to ensure a snug fit.
Note: The cable sensor jack is NOT
for plugging in a power adaptor.
Doing so could damage
the detector.
Cable
sensor jack
GET IT ON
3
3 Connect
Pair and name your detector
1 Water Leak and Under Add New Device, select
Freeze Detector.
Note: Make sure Bluetooth is enabled on your
mobile device and that the detectors LED is
blinking blue. If it is not, see the Reset section.
2 Provide a location for your detector. Press
NEXT.
3 The detector will now pair with the app.
Note: If you have more than
one detector, you will need
to connect each detector
individually.
4 An audible alert will sound
and your detectors LED will
turn solid blue to indicate
your detector is paired. Press
NEXT.
5 Create a custom name for
the detector or select one
from the list. Press NEXT.


Product specificaties

Merk: Honeywell
Categorie: Alarmsysteem
Model: RCHW3610WF1001

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell RCHW3610WF1001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Alarmsysteem Honeywell

Handleiding Alarmsysteem

Nieuwste handleidingen voor Alarmsysteem