Honeywell Chronotherm CM61 Handleiding

Honeywell Thermostaat Chronotherm CM61

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell Chronotherm CM61 (2 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 105 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Honeywell Control Systems Ltd.

Arlington Business Park

Bracknell, Berkshire RG12 1EB

User Help Line: 01344 656511

USER GUIDE

What is a Programmable Thermostat?

The Honeywell CM61 is a programmable thermostat which controls your

heating system so that you can have comfortable temperatures when you

are at home and energy savings when you are away.

It is important to understand that the CM61 is not a traditional “ON/OFF”

controller but a “HI / LOW” temperature controller.

This means that to program the heating to go ‘OFF’ at a particular time a

lower (setback) temperature setpoint is entered which you would choose

to protect you and your home.

What will the CM61 Programmable Thermostat do

for me?

Attractive slim styling makes it ideal for location in any suitable

room in your home.

Display Backlight illuminates the display when a key is pressed for

easier viewing in low light conditions.

let you set 6 6 daily independent temperature levels any

temperatures from 5 to 30°C to match your daily lifestyle.

Holiday button saves energy by letting you reduce the temperature

for 1 to 99 days while you are on holiday, returning to normal operation

on the day you return.

Memory holds the user program indenitely so that it is never lost

even if you take the batteries out.

Outside Temperature Sensor (optional accessory) can be tted to

the CM61 to display the outside temperature.

Remote Temperature Sensor (optional accessory) can be tted to

the CM61 to control the temperature from another room.

Optimum Start option is a program which ensures that the optimum

temperature conditions are achieved at the required times as

described below (not available on T6661B1040).

What is Optimum Start?

Optimum Start is an Energy Efciency Feature that adjusts the start time

of your heating system depending upon how cold it is.

On cold days your Heating will be started earlier to ensure that your home

is warm when you get up and on warmer days the heating system will be

started later to save energy.

So, if the Optimum Start Feature is used, the time / temperature settings

which are entered into the CM61 are when you want to be warm by and

not when you want the heating to start. (not available on T6661B1040)

Comfort Solutions

What if something happens to my heating system? How can I check that the CM61 is working?

See the troubleshooting guide below. If you need assistance after this, call your installer. The CM61 should only be opened or removed by a qualied profes-

sional to prevent possible injury from electric shock.

www.honeywelluk.com

42010821-003 R1

CM61

Programmable

Thermostat

Warning.

This product and its associated documentation and packaging are protected by various intellectual property rights belonging to Honeywell Inc and its

subsidiaries and existing under the laws of the UK and other countries. These intellectual and property rights may include patent applications, registered

designs, unregistered designs, registered trade marks, unregistered trade marks and copyrights and also include the following UK registration rights:

UK patent application number 98062207.8

UK registered design numbers 2073334, 2073340 and 2073343.

Remedy

Check batteries are in the battery compartment and that the

paper tab has been pulled out

Check that the batteries have been installed in the correct

orientation.

Replace batteries

Remove battery cartridge and re-insert

Change the batteries as described previously

Check that there is power to the system

Press TEMP

to increase the temperature a few degrees

above the current room temperature. The heating should come

on after a few seconds.

Call installer to check electrical connection between the CM61

and the boiler

Call installer

Remove battery cartridge and re-insert. If the symbol

does not clear itself in a few minutes call the installer

Call your installer to arrange a maintenance visit.

The CM61 and heating system will continue to operate as

normal.

Possible Cause

No batteries

Battery orientation

Exhausted batteries

Incorrect battery cartridge insertion

Batteries need replacing

No power to system

Program does not call for heat

CM61 not connected to boiler properly

CM61 not set correctly for your system

Fault in the CM61

Your installer has set a scheduled

maintenance alert period on your CM61 as

a recommendation that your heating system

should receive a routine inspection.

Symptom

Blank Display

Display shows flashing symbol

Display works but heating does not

switch on

Heating switches ON/OFF too slowly

or too quickly

Temperature swings between too hot

and too cold

Display shows

symbol

Display shows the word 'SERVICE'

Trouble Shooting Guide

How can I switch the CM61 off?

Press the button. The unit has an intelligent built-in frost protection OFF

feature, so that if the temperature falls below 5°C, it will automatically

switch the heating on.

How do change the batteries?

With no other accessories tted and for applications other than electric

heating, the batteries should last about 4 years.

When the batteries need replacing, a ashing symbol will be

displayed.

To change the batteries:

1. Lift up the front ap to reveal the battery compartment. Open the

battery compartment by inserting a coin underneath the bottom right

edge of the ap and lift out.

2. Replace the used batteries with 2 new AA LR6 Alkaline Batteries and

push the battery compartment rmly back into the front of the unit.

RESPECT YOUR ENVIRONMENT!

Take care to dispose of used batteries carefully.

NOTE: If you take more than one minute to change the batteries the clock

may need to be reset - see How do I adjust the time?

Can I use my CM61 to control my air-conditioning

system?

Yes. Please refer to your installer for more information.

What does 'SERVICE' on the display of my CM61

mean (optional)?

NOTE:

This option only works if activated by your installer.

The ' ' indicator is displayed at set intervals as a reminder that SERVICE

your heating system requires a routine check. Please call your installer

to arrange a maintenance visit.

The symbol will remain on the display of the CM61 until it is either reset

or disabled by your installer. The CM61 and heating system will continue

to operate as normal.

How do I set the time?

The time can be set with the CM61 in the AUTO MAN , or operating OFF

modes. Press

or +

until the correct time is displayed. Each button

press will change the time by one minute. Holding the button down for a

few seconds will change the time slowly at rst, then quickly. Make sure

AM or PM is correct.

How do I get started with the factory default tem-

perature program?

Press the AUTO button. The CM61 will now control your heating using

the built-in temperature program:-

3. Press TEMP

to adjust the rst temperature level. Holding

the button down will change the temperature quickly. The temperature

can be set in 0.5°C steps from 5°C to 30°C.

4. Press to display the second temperature level and time PROG 2

levels. Set these by pressing

or +

and TEMP

5. The remaining temperature changes can be displayed by pressing

PROG 3 4 5 6 buttons , , and and adjusted by using

or +

and

TEMP

. (If you don’t want to use all the temperature change

times 2, 3, 4, 5 or 6 refer to the section “What if I don’t want to use

all 6 temperature change times?”).

6. Press AUTO when you have completed your programming, The CM61

will now control the room temperature to match your program.

What if I don’t want to use all 6 temperature

change times?

Although the CM61 has up to 6 temperature / time changes available

(PROG 1 – 6), any unused settings may be deleted by holding down the

appropriate button ( ) for 2 seconds.PROG 2 – 6

To reinstate any deleted setting hold down the button again for 2

seconds.

Can I change the programmed temperature for a

short time?

When the CM61 is in mode (display will show “AUTO”) the AUTO

temperature can be adjusted temporarily by pressing TEMP

. The temperature will return to the program at the next temperature

change time.

How do I check the programmed temperature?

In normal operation the temperature displayed is the actual room

temperature. To check the programmed temperature press

and the

display will show the programmed temperature with the two small

arrows.

How do I set one temperature for the whole day?

To operate as a simple thermostat with one temperature throughout the

day, press . Adjust the manual temperature by pressing MAN

TEMP

. The manual temperature can be set anywhere from 5°C to 30°C

in 0.5°C steps.

I am going on holiday for a few days. How do I

save energy but ensure that the house is warm

when I return?

1. Make sure the CM61 is in AUTO MAN or mode.

2. Press (HOLIDAY) to display the holiday days counter and

temperature.

3. Press

or +

to set the holiday time (1 - 99 days).

4. Press TEMP

to set the holiday temperature (5°C - 30°C).

The unit will control to the new temperature for the set number of days

holiday. At midnight the holiday counter will be reduced by one until the

selected number of days have passed. The unit will then return to normal

control as set by the or MAN AUTO button.

To cancel the HOLIDAY setting, press the button a second time.

CM61 Controls/Display Layout

The diagram below details the key button functions and display

information.

What other accessories can I buy that work with

the CM61?

Honeywell provides other accessories and “Add-On” modules that can

be used with your CM61, ask your installer for details :

1. Automatic Time Setting (ATS) “Add-On” Module *

The ATS module picks up a daily time signal from a transmitter in Central

Europe and corrects the time on the CM61 display. So:

• You never need to set or adjust the time

• There is no need to adjust the unit by -/+ 1 hour in summer / winter

since the unit does this automatically

• Your CM61 is the most accurate clock in your home, so you can use

this information to set-up all your other clocks.

* Not available in all Geographic Regions depending on transmitter range

and home location.

2. Outside Temperature Sensor Accessory

The Outside Temperature Sensor accessory can be tted to your CM61

to display the outside temperature. By pressing the

twice, the CM61

displays the external temperature.

3. Remote Temperature Sensor Accessory

The Remote Temperature Sensor accessory can be tted to your CM61

to control the temperature of another room where it is inconvenient to

locate the CM61 e.g. commercial premises where the public may adjust

buttons.

Daily

Program 1 2 3 4 5 6

Time 6:30 8:00 12:00 2:00 6:00 10:30

Temperature 21°C 18°C 21°C 18°C 21°C 16°C

1 2 3 4 5 6

Battery Low

Indicator

Time Display Burner on

Indicator

Temperature

Change Buttons

= increase

= decrease

Information

Enquiry

Button

Temperature

Display

Holiday ButtonOff Button

Manual Function

Button

Battery

Compartment

Time

Change

Buttons

Program

Buttons

Automatic

Function

Button

TEMP

AUTO MAN OFF

1 2 3 4 5 6

PROG

EXT

CM61 Display Backlight

The CM61 has a backlit display that

will illuminate when a button is pressed

for easier viewing of the display in low light conditions. After the last button

press the backlight will remain on for 7 seconds.

SERVICE

How do I set my own daily temperature

program?

1. Press PROG 1. The rst temperature change time and temperature

level will ash to indicate they can be changed. (the two small

arrows are displayed only when the programmed temperature level

is shown).

2. Press or +

to adjust the rst temperature change time. Holding

the button down will change the time quickly. The change time can be

set in 10 minute steps from 03:00 in the morning. The change time

can be adjusted up to 02:50 on the next morning, so you can maintain

the evening temperature after midnight.

(Note: If you attempt to move a change time past the next change

time, both times will be moved).

3. Press TEMP

to adjust the rst temperature level. Holding

the button down will change the temperature quickly. The temperature

can be set in 0.5°C steps from 5°C to 30°C.

1 2 3 4 5 6

Product specificaties

Merk:	Honeywell
Categorie:	Thermostaat
Model:	Chronotherm CM61

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell Chronotherm CM61 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermostaat Honeywell

Honeywell T4 Pro TH4110U2005 Handleiding

10 Juni 2024

Honeywell RTH9585WF Handleiding

27 Februari 2024

Honeywell BACnet TB3026B Handleiding

2 September 2023

Honeywell RTH221B1039/U1 Handleiding

9 Juli 2023

Honeywell RTH2410B1019/E1 Handleiding

7 Juli 2023

Honeywell RTH6580WF1001/U1 Handleiding

7 Juli 2023

Honeywell RTH111B1024/E1 Handleiding

6 Juli 2023

Honeywell RTH2300B1038/E1 Handleiding

6 Juli 2023

Honeywell Home THM6000R7001/U Handleiding

4 Juli 2023

Honeywell T4398B1003/U Handleiding

4 Juli 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Tru Components TCN4S-24R Handleiding

18 December 2024

Tru Components TK4S-14RC Handleiding

18 December 2024

Tru Components TX4S-14R Handleiding

17 December 2024

Warmup 5iE Handleiding

16 December 2024

Warmup +Kit Handleiding

16 December 2024

Nobo Connect SWT-IZW Handleiding

15 December 2024

Nobo Connect SWT-IZB Handleiding

11 December 2024

Hive Thermostat Handleiding

10 December 2024

GENERAL Life HT15S Handleiding

9 December 2024

GENERAL Life HT15 Handleiding

9 December 2024