Home Easy HE-220 Handleiding

Home Easy Niet gecategoriseerd HE-220

Lees hieronder de 📖 handleiding in het Nederlandse voor Home Easy HE-220 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

The HE-200 Remote Control Timer can be paired to 16

separate receiver units, select the unit code by pressing

the unit button.

Up to Six remote control units can be paired with each receiver socket or

module. To program a socket insert the unit into a plug socket and switch on

the power, now press the "Learn" button . The LED will start to flash, now

press the selected "ON" button on the remote control, the LED will stop

flashing. The units are now paired together, you can test this by pressing the

selected "ON/OFF" button

Always refer to the original instruction when using with additional products

Deleting Remote Control:

To delete a remote control that has been paired with a HomeEasy receiver

socket, simply press the "Learn" button . The LED will start to blink; press the

"Off" button on the remote control, the LED will blink twice to confirm that the

remote control has been removed from the receiver sockets memory.

Remote Socket reset:

To delete all the remote control units from the memory of the receiver socket,

hold the "Learn" button for more than 6 seconds, the LED will start to blink

continuously. Press the learn button again, the LED will blink twice to confirm

the deletion of all remote controls form the receiver memory.

Unit Setting:

Pairing/Deleting with Remote Control:

The HE-200 comes with a preset to Group code A. When

using additional remote control timers you will need to

select a new group code.

To select a new group code, remove the battery cover and

using a small screw driver, rotate the group dial to a new

setting e.g. Group B

Dimming Receiver Sockets HE220:

To dim a compatible receiver socket.

RE-INVENTING THE HOME

HOME

easy

1. Select the unit by

pressing the "unit"

button until the

correct number is

displayed on the

screen.

2. Press the "On"

button and then

press "On" again.

Never exceed 300W

maximum load.

HE210 & HE-220

3. The dimmer will start to dim the light unit till it reaches zero, then the

unit will start to increase the light up to the maximum level. To set the

desired level, press the "On" button.

4. Press the "Off" button to switch the receiver unit off.

Remove the battery cover form the back of the remote control.

The HE-200 includes 2 batteries:

 LCD Display: 1 x CR2032 -Byron SX100 (Included)

 RF Transmission: 1 x 23A - Byron SD100 (Included)

Remove the required battery and replace with new, making sure the

polarity matches the internal markings.

HE-200/210/220

Remote Control Timer

V1.0

Display Functions:

Product Specification:

Remote Control: HE-200

Battery: 3v Cr2032 & 12V 23A

Range: 30 Metres (Open Distance)

Frequency: 433.92MHz

Indoor Use Only

Warning: Never Exceed the Product Specification

Receiver Socket: HE-202

Input: 230V ~ 50Hz

Max Load: 300W (Incandescent)

Frequency: 433.92MHz

Indoor Use Only

The HomeEasy remote control Timer allows you to add

the following extra features to your HomeEasy products:

 -12 Programmable memory Settings

 -Security Mode

 -Single and Daily Timer Functions

 -24Hr Timer Display

 -30 Metre Wire Free Range

 -CR2032/23A Battery (Included)



LCD Display

Functions:

1: 12 Programmable Memory Spaces

2: 24Hr Time

3: Timer Setting "On"

4: Timer Setting "Off"

5: Security Mode

6: Timer Mode - Single Timer Setting

7: Timer Mode - Daily Timer Setting

8: Low Battery Warning

9: Unit Code Display

10: Transmission Indicator Signal

Receiver Select

Switch "On" Selected Receiver

Switch "Off" Selected Receiver

Clock Setting

Program Timer/View

Enter

Delete/Pause

Select Up/Down

easy

HOME

Changing Batteries:

Learn

C H Byron

34, Sherwood Rd

Aston Fields

Bromsgrove

B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

DK

FIN

IRL

EST

SLO

0560

Tel: 0845 2301231

Fax: 01527 550001

Web: www.chbyron.com

E-mail:

support@chbyron.com

Help: Occasionally interference from receiver sockets plugged into adjacent wall

sockets or when used with transformers (low voltage products) can affect the

operating range.

Try placing one of the receiver sockets in another wall socket. For low voltage

products, place the transformer as far away form the receiver socket as possible.

Contact:   Helpline: 0845 2301 231

TIMBER CONCRETE

METAL GLASS

PLASTICS

RF Range: The radio signals operating distance is reduced when the signal has

to pass through walls. The radio signals achieve a range of 30m inside a building;

this can be reduced depending on the type of material

10 - 15%

BRICK

10 - 40%

40- 80%

10 - 40%

90% 5 - 15%

Range

Reduction Guide:

Switching On/Off :

1. Select the unit by

pressing the "unit"

button until the

correct number is

displayed on the

screen.

2. Press the "On"

button, the receiver

socket will switch on.

Never exceed 300W

maximum load.

3. Press the "Off" button to switch the receiver unit off.

Setting Clock

The remote control displays the time in a 24hr format, to set the time.

1. Press and hold the

clock button for +3sec.

The hrs will now start

to flash

2. Use the

buttons to select

the hours and

press Enter.

3. The minutes will now start to flash, set using the up and

down arrows to select the minutes and then press enter.

Setting Timer :

The HE-200 remote control timer can store up to 12 different timer

programs, ideal for switching on lights throughout the home for added

security.

To program the remote control:

1. Press and hold the "Timer" button for 3 seconds, the

display will show the 12 available memory spaces. Use

the arrows keys to select a memory space, the display

will also show any programmed times already saved.

Press "Enter" to select the program space.

2. Select the required unit from using the "Up/Down"

arrows e.g. if the socket to be programmed is

programmed to unit code 2, select unit 2 on the display

and press "Enter". Only one unit code can be selected

per program.

3. The start or On time will start to flash, use the arrow keys to select the hours

and press enter to select the min.

Now select the finish or off time.

4. Finally select the program mode using the arrows keys and press enter to

confirm.

Daily Timer Setting: Activates the program daily

Security Setting: Selecting the security mode will switch the

receiver units "On/Off" randomly through out the set time.

 On = between 40Min - 2Hrs

 Off = between 40Min - 3Hrs

Single Timer: Activates the program for a single time only.

Help Section :

Product specificaties

Merk:	Home Easy
Categorie:	Niet gecategoriseerd
Model:	HE-220

Heb je hulp nodig?

Als je hulp nodig hebt met Home Easy HE-220 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Home Easy

Home Easy HE-209 Handleiding

21 April 2023

Home Easy HE-210 Handleiding

21 April 2023

Home Easy HE-300 Handleiding

21 April 2023

Home Easy HE-204 Handleiding

21 April 2023

Home Easy HE-100 Handleiding

21 April 2023

Home Easy HE-301 Handleiding

21 April 2023

Home Easy HE-307 Handleiding

4 April 2023

Home Easy HE-203 Handleiding

24 Maart 2023

Home Easy HE-220 Handleiding

16 Maart 2023

Home Easy HE-302 Handleiding

13 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024

Profoto RFi Softbox Octa Handleiding

24 December 2024

Koenic KAP 2523 Handleiding

24 December 2024

Philips HD9921 Handleiding

24 December 2024

Philips Senseo HD7008 Handleiding

24 December 2024

Onkyo IRK1804C Handleiding

24 December 2024