Hoffman P2ACU6 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Hoffman P2ACU6 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
PR O LI NE G 2 INtERN a L CO m PO NENt s Rack-Mount angles and accessoRies
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEmOduLaR ENCLOs u R E s OLutIONs1 Spec-01200 F
19-INCH RaCK a NGLEs
aPPLICatION
The PROLINE G2 Rack Angles mount using BV-M6 fasteners instead
of the traditional cage nut and screw combination. The Rack Angle
height and rack unit count are optimized for the PROLINE G2 frame
heights. Rack Angles have two mounting surfaces that function in
the attachment of rack-mount equipment and accessories. Rack
Angles comply with ANSI/EIA RS-310-D rack mounting standards.
sPECIFICatIONs
β€’
Plated and furnished in pairs
β€’
Can be mounted directly to the frame, or at variable depths using
Adjustable Rack-Mounting Rails or Grid Straps; when mounted to
the frame there is 44mm between the door opening and the Rack
Angle mounting surface
β€’
Single-bay Frames: in a 600-mm wide frame, Rack Angles can
be mounted in-line with the frame; in an 800-mm wide frame,
Adjustable Rack-Mounting Rails or Frame Reducing Brackets are
required (sold separately) to achieve the 19-inch rack spacing
β€’
Double-Bay Frames: in a 1200-mm wide frame, Center Uprights
must be used to create a mounting surface in the center of the
enclosure for either bay; in a 1600-mm frame, Center Uprights
are again required in addition to Frame Reducing Brackets or
Adjustable Rack-Mounting Rails to achieve the 19-inch rack
spacing
β€’
Tapped-Hole Rack Angles are 12 gauge (2.5mm) steel and
accommodate 10-32 screws for equipment mounting
β€’
Square-Hole Rack Angles are 14 gauge (1.75mm) steel and
accept both metric and English cage nuts and screws: most
commonly M5, M6, and 10-32 screws
β€’
Optional Shelves, Drawers, and Guides require two sets of Rack
Angles to secure within the frame
β€’
All mounting hardware for Rack Angle installation into the
frame is included; mounting hardware for securing rack-mount
equipment/accessories to the Rack Angles is either supplied with
the item or purchased separately
LOad R atI NG
β€’ Note: it is important to comply with manufacturer’s
recommendations for rack mounting support; follow mounting
instructions for individual equipment
β€’ 20 lbs. (9.1 kg) per rack unit for equipment under 20 in. (508 mm)
deep
β€’ Equipment over 20 in. (508 mm) deep or over 20 lbs. (9.1 kg) per
rack unit requires rear support
aCCEssORIEs
β€’ Frame Reducing Brackets
β€’ Adjustable Rack-Mounting Rails
β€’ Frame Accessory Brackets
β€’ Rack Angle Adapter Bracket
β€’ Center Upright
β€’ Filler Panel Kit
β€’ Screw Package
β€’ Cage Nut Package
BULLETIN: P40
Standard Product ξ»’
Catalog Number Hole Type H (mm) H (in.) Fits Frame Height (mm) Rack Units
P2RA19S6 Square 509 20.0 600 11
P2RA19T6 Tapped 509 20.0 600 11
P2RA19S8 Square 713 28.1 800 16
P2RA19T8 Tapped 713 28.1 800 16
P2RA19S10 Square 909 35.8 1000 20
P2RA19T10 Tapped 909 35.8 1000 20
P2RA19S12 Square 1113 43.8 1200 25
P2RA19T12 Tapped 1113 43.8 1200 25
P2RA19S14 Square 1309 51.5 1400 29
P2RA19T14 Tapped 1309 51.5 1400 29
P2RA19S16 Square 1513 59.6 1600 33
P2RA19T16 Tapped 1513 59.6 1600 33
P2RA19S18 Square 1709 67.3 1800 38
P2RA19T18 Tapped 1709 67.3 1800 38
P2RA19S20 Square 1913 75.3 2000 43
P2RA19T20 Tapped 1913 75.3 2000 43
P2RA19S22 Square 2109 83.0 2200 47
P2RA19T22 Tapped 2109 83.0 2200 47
Frame height dimensions are nominal mm.
ξ˜ƒξ˜ƒ+ξ˜ƒξ˜ƒ
ξ˜ƒ ξ˜—ξ˜›
ξ˜”ξ˜‘ξ˜›ξ˜œ
ξ˜ƒ
ξ˜ƒξ˜—ξ˜˜
ξ˜”ξ˜‘ξ˜šξ˜›
ξ˜ƒ
ξ˜ƒ ξ˜•ξ˜“
ξ˜‘ξ˜šξ˜›
ξ˜ƒ
ξ˜ƒξ˜ƒ+ξ˜ƒξ˜ƒ
ξ˜ƒξ˜•ξ˜“
ξ˜‘ξ˜šξ˜›
ξ˜ƒ
ξ˜ƒ ξ˜—ξ˜˜
ξ˜”ξ˜‘ξ˜šξ˜›
ξ˜ƒ
ξ˜ƒ ξ˜—ξ˜›
ξ˜”ξ˜‘ξ˜›ξ˜œ
ξ˜ƒ
ξ˜ƒξ˜”ξ˜™
ξ˜‘ξ˜™ξ˜—
ξ˜ƒ
ξ˜ƒξ˜”ξ˜™
ξ˜‘ξ˜™ξ˜–
ξ˜ƒ
ξ˜ƒξ˜”ξ˜™
ξ˜‘ξ˜™ξ˜–
ξ˜ƒ
ξ˜ƒξ˜—ξ˜—
ξ˜”ξ˜‘ξ˜šξ˜˜
ξ˜ƒ
ξ˜”ξ˜“
ξ˜‘ξ˜–ξ˜›
7<3
ξ˜”ξ˜“
ξ˜‘ξ˜–ξ˜›
7<3
ξ˜ƒ ξ˜”ξ˜™
ξ˜‘ξ˜™ξ˜—
ξ˜ƒ
ξ˜ƒξ˜”ξ˜™
ξ˜‘ξ˜™ξ˜–
ξ˜ƒ
ξ˜ƒξ˜—ξ˜—
ξ˜”ξ˜‘ξ˜šξ˜˜
ξ˜ƒ
ξ˜ƒ ξ˜”ξ˜™
ξ˜‘ξ˜™ξ˜–
ξ˜ƒ
ξ˜†ξ˜”ξ˜“ξ˜ξ˜–ξ˜•
7<3
ξ˜›ξ˜œξ˜”ξ˜™ξ˜–ξ˜—ξ˜–ξ˜˜
PR O LI NE G 2 INtE RN a L CO m PO NENt s Rack-Mount angles and accessoRies
PH 763.422.2211nVent.com/HOFFMAN mOduLaR ENCLOs u R E s OLutIONs 2
Spec-01200 F
P2
Model
PROLINE G2
R
Component
Rack
A ssorycce
20
Height
A19
Type
A19 = 19" rack angle
SFH = swing frame,
heavy-duty
S
Specialty
mm
22 = 2200
20 = 2000
18 = 1800
16 = 1600
14 = 1400
12 = 1200
10 = 1000
8 = 800
6 = 600
P2RA19S20
Catalog Number
Blank d= standar
S = square
(19” rack angle only)
T = tapped
(19” rack angle only)
NOTE: Not ever y combination is
available as a standard product.
PR O LI NE G 2 INtE RN a L CO m PO NENt s Rack-Mount angles and accessoRies
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEmOduLaR ENCLOs u R E s OLutIONs3 Spec-01200 F
FRa mE REduCING BRaCKEts aPPLICatION
β€’ Frame-Reducing Brackets are used to reduce wider frames to
600mm, allowing 19-in. rack angles to ξ΄ͺt
β€’ Brackets can also be used to left- or right- justify rack-mounted
equipment
sPECIFICatIONs
β€’ Furnished in sets of four
β€’ 14 gauge (1.75 mm) steel
β€’ Mounting hardware included
FINIsH
Plated
BULLETIN: P40
Catalog Number D (mm) D (in.)
Converts Frame
Width (mm)
P2AFRB50 50 2.0 From 800 to 700
P2AFRB100 100 3.9 From 800 to 600
P2AFRB200 200 7.9 From 1000 to 600
adJustaBLE RaCK-mOuNtING RaILs
aPPLICatION
PROLINE G2 Adjustable Rack-Mounting Rails allow 19-in. Rack
Angles to be positioned anywhere within the modular enclosure
frame.
sPECIFICatIONs
β€’
Includes two right-hand and two left-hand mounting rails
β€’
12 gauge (2.5 mm) steel
β€’
Mounting hardware is included
FINIsH
Plated
BULLETIN: P40
Catalog Number
Fits Frame Depth
mm/in.
P2GARA4 400
P2GARA5 500
P2GARA6 600
P2GARA8 800
P2GARA10 1000
Frame Depth dimensions are nominal mm.


Product specificaties

Merk: Hoffman
Categorie: Niet gecategoriseerd
Model: P2ACU6
Kleur van het product: Grijs
Gewicht: 1814 g
Hoogte: 544 mm
Soort: Rekprofiel
Materiaal behuizing: Staal
Dikte van materiaal: 2.5 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Hoffman P2ACU6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Hoffman

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd