Hikvision DS-PKFS-4(868MHz) Handleiding

Hikvision Afstandsbediening DS-PKFS-4(868MHz)

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-PKFS-4(868MHz) (4 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
DS-PD2-T12P-WEL
12m Wireless Outdoor Detector EN50131-3:2009
EN50131-5-3:2005+A1:2008
Security Grade (SG) 2
Environmental Class (EC) II
DS-PKFS-4
Diagram References
E N G L I S H
1
2
3
REGISTERING FROM DEFAULT
Registering the keyfob is performed in the Manager Menu of the
Control Panel.
LEDs
1) General LEDs:
(i) From power up: Not Register. (ii) Registering process.
(iii) 8 x flashes: Register.
(iv) Fast flashing: Unlocking. (v) Fast flashing: Locking.
(vi) 18 x Slow flashes (10 secs): Fault with new baery installed.
(vii) 6 x Flashes: Alarm (when checking status)
2) Arming/Disarming LEDs:
(i) Arming.
(ii) (Amber) 4 x Flashes: Fault, 1 x Flash: Key pressed.
(iii) Armed. (iv) Disarmed.
REPLACING THE BATTERY
When the baery needs replacing please make sure that the
posive and negave are as shown in the diagram.
Button Configurations (all programmable):
Button Actions:
Show status, Arm/Set area, Disarm/Set area, Latch output, Timed
output and Personal Aack.
Battery:
Type: 1x Li-Mn Cell 3.0V
Part Code: BATT-KF1215
Threshold: 2.1V +/- 5% at 25°C. Life: Up to 2 Years.
Wireless:
Transmission Frequency: FM Transceiver Narrow Band.
Transmission Method: Fully encrypted rolling code
Code combinaons: 4294967295.
Materials and Environment:
Indicaon: LEDs (Red, Green, Amber)
Operaon Temperature:-10°C to 40°C(Cerfied)
Dimensions (H x W x D): 72 x 30 x 20mm.
Weight: 28g
Compable with the Enforcer, PCX and EURO commercial control
panels (using the Wireless Expander).
Technical Specification
Battery Information
1
2
3
LEDs 1) General LEDs
REGISTERING FROM DEFAULT
>5s
2) Arming ar/Dis ming L sED
(ii) (Amber)
4 x Flashes: Fault
1 x Flash: Key pressed
(vi) 18 x Slow flashes (10 secs):
Fault with new battery installed
(i) Arming
(iii) 8 x flashes: Learnt
(iv) Fast flashing: Unlocking
(v) Fast flashing: Locking
(iv) Disarmed(iii) Armed
(vii) 6 x Flashes: Alarm
(when checking status)
(i) From power up:
Not learnt
(slow flashing)
(ii) Learning process
(fast flashing)
REPLACING THE TBA TERY
14
2
3
-
+
BATT-KF1215
For electrical products sold within the European
Community. At the end of the electrical products
life, it should not be disposed of with household
waste. Pleaserecycle where facilies exist.
Check with your local Authority or retailer for
recycling advice in your country.
Two Way Wireless Keyfob
R=Red G=Green O=Orange
G
GORG
G
G
GG
G
R
RR
RR
R
R
The baeries supplied have been chosen to provide long service life whilst,
for safety reasons, having limited output current.The baery is protected
on purchase by a piece of plasc that must be removed for operaon.
When disposing of the product, the baery must be removed and disposed
of separately in accordance with the local regulaons.
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with theapplicable harmonized European
standards listed underthe RE Direcve 2014/53/EU, the RoHS Direcve
2011/65/EU.
F R Ç SA N A I
P O G SR T U U Ê
I T A L N OI A E S P A Ñ O L
Р У ЙС С К И
User Manual
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co.,Ltd.
ALL RIGHTS RESERVED.
Any and all informaon, including, among others, wordings, pictures,
graphs are the properes of Hangzhou Hikvision Digital Technology Co.,
Ltd. or its subsidiaries (hereinaer referred to be “Hikvision”). This user
manual (hereinaer referred to be “the Manual”) cannot be reproduced,
changed,translated, or distributed, parally or wholly, by any means,
without the prior wrien permission of Hikvision. Unless otherwise
spulated, Hikvision does not make any warranes, guarantees or
representaons, express or implied, regarding to the Manual.
About this Manual
This manual is applicable to detector.
The Manual includes instrucons for using and managing the product.
Pictures, charts, images and all other informaon hereinaer are for
descripon and explanaon only. The informaon contained in the
Manual is subject to change, without noce, due to firmware updates
or other reasons.
Please find the latest version in the company website
(hp://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the
properes of Hikvision in various jurisdicons. Other trademarks and
logos menoned below are the properes of their respecve owners.
Product Information
Références du schéma
INSCRIPTION PAR DÉFAUT
L’inscripon de la télécommande s’effectue dans le menu Gesonnaire du panneau de commande.
LED
1) Voyants généraux :
(i) À parr de la mise en route : Pas inscrit. (ii) Processus d’inscripon.
(iii) 8 clignotements : S’inscrire.
(iv) Clignotement rapide : Déverrouillage (v) Clignotement rapide : Verrouillage
(vi) 18 clignotements lents (10 sec) : Défaut de la nouvelle baerie installée.
(vii) 6 clignotements : Alarme (lors du contrôle d’état)
2) Voyants d’armement/désarmement :
(i) Armement.
(ii) (Jaune) 4 clignotements : Défaut, 1 clignotement : Appui sur une touche.
(iii) Armé. (iv) Désarmé.
REMPLACEMENT DE LA BATTERIE
Lorsque la baerie doit être remplacée, assurez-vous que les bornes + et - sont conformes à la vue
schémaque.
Configuraons des boutons (tous programmables) :
Acon du bouton :
Afficher l’état, armer/régler une zone, désarmer/régler une zone, verrouiller la sore, temporiser la sore et
alerter d’une aaque personnelle
Piles :
Type : 1 pile Li-Mn de 3,0 V
Code de la pièce : BATT-KF1215
Seuil : 2,1 V +/- 5 % à 25 °C. Durée de vie : 2 ans max.
Sans fil :
Fréquence de transmission : Émeeur-récepteur FM à bande étroite.
Méthode de transmission : Code roulant enèrement crypté.
Combinaisons de codes : 4294967295.
Matériaux et environnement :
Indicaon : Voyants (rouge, vert, jaune)
Température de fonconnement : -10 °C à 40 °C (cerfiée)
Dimensions (H x L x P) : 72 x 30 x 20 mm.
Poids : 28 g
Compable avec les panneaux de commande commerciaux Enforcer, PCX et EURO (en ulisant l’extenseur
sans fil).
1
2
3
Spécifications techniques
Referências do diagrama
REGISTRO PELO PADRÃO
O registro do comando é realizado no menu de gerenciamento do painel de controle.
LEDs
1) LEDs gerais:
(i) Quando ligar: não registrado. (ii) Processo de registro.
(iii) 8 piscadas: registrado.
(iv) Piscando rápido: desbloqueando. (v) Piscando rápido: bloqueando.
(vi) 18 piscadas lentas (10 s): falha com a nova bateria instalada.
(vii) 6 piscadas: alarme (ao verificar o status)
2) LEDS de armação/desarme:
(i) Armando.
(ii) (Âmbar) 4 piscadas: falha, uma piscada: tecla pressionada.
(iii) Armado. (iv) Desarmado.
TROCA DA BATERIA
Quando a bateria ver de ser substuída, garanta que o posivo e o negavo estejam como mostrado no
diagrama.
Configurações dos botões (todos programáveis):
Ações dos botões:
Mostrar status, Armar/definir área, Desarmar/definir área, Trancar saída, Saída temporizada e Ataque pessoal.
Bateria:
Tipo: 1 x Li-Mn Cell 3 V
Código da peça: BATT-KF1215
Limite: 2,1 V +/-5% a 25 °C. Duração: até 2 anos.
Sem fio:
Frequência de transmissão: transmissor FM de banda estreita.
Método de transmissão: rolling code totalmente criptografado.
Combinações de código: 4294967295.
Materiais e ambiente:
Indicação: LEDs (vermelho, verde e âmbar)
Temperatura de operação: -10 °C a 40 °C (cerficado)
Dimensões (A x L x P): 72 x 30 x 20 mm.
Peso: 28 g
Compavel com os painéis de controle comerciais Enforcer, PCX e EURO (usando o extensor sem fio).
1
2
3
Especificação técnica
Referencias del diagrama
REGISTRO PREDETERMINADO
El registro del llavero se realiza en el menú de administrador del panel de control.
Ledes
1) Ledes generales:
(i) Desde el encendido: No registrado. (ii) Proceso de registro.
(iii) Parpadea 8 veces: Registrarse.
(iv) Parpadea rápidamente: Desbloqueado. (v) Parpadea rápidamente: Bloqueado.
(vi) Parpadea lentamente 18 veces (10 segundos): Fallo con una pila nueva instalada.
(vii) Parpadea 6 veces: Alarma (en estado de comprobación)
2) Ledes de armado/desarmado:
(i) Armado.
(ii) (Ámbar) Parpadea 4 veces: Fallo, 1 parpadeo: Botón pulsado.
(iii) Armado. (iv) Desarmado.
SUSTITUCIÓN DE LA PILA
Cuando sea necesario sustuir la pila, asegúrese de que los terminales posivo y negavo estén como se
muestra en el diagrama.
Configuraciones de los botones (todos programables):
Acción de botón:
Mostrar estado, Armar/Establecer área, Desarmar/Establecer área, Resultado de cierre, Resultado temporiza-
do y Ataque personal.
Batería:
Tipo: 1 pila Li-Mn de 3,0 V
Código de pieza: BATT-KF1215
Umbral: 2,1 V +/- 5 % a 25 °C. Vida úl: Hasta 2 años.
Señal inalámbrica:
Frecuencia de transmisión: Transmisor FM de banda estrecha.
Método de transmisión: Código variable completamente cifrado.
Combinaciones de códigos: 4294967295.
Materiales y entorno:
Indicación: Ledes (rojo, verde, ámbar)
Temperatura de funcionamiento: -10 °C a 40 °C (cerficada)
Dimensiones (alto x ancho x profundidad): 72 x 30 x 20mm.
Peso: 28g
Compable con los paneles de control comerciales Enforcer, PCX y EURO (usando el amplificador inalámbrico).
1
2
3
Especificaciones técnicas
Ссылки на рисунки
РЕГИСТРАЦИЯ ПО УМОЛЧАНИЮ
Регистрация брелока выполняется в меню диспетчера на панели управления.
Светодиодные индикаторы
1) Общие светодиоды:
(i) Питание включено: не зарегистрирован. (ii) Процесс регистрации.
(iii) 8 вспышек: регистрация.
(iv) Частые вспышки: разблокировка. (v) Частые вспышки: блокировка.
(vi) 18 медленных вспышек (10 сек): ошибка при установке новой батареи.
(vii) 6 вспышек: сигнал тревоги (при проверке состояния)
2) Светодиоды постановки на охрану/снятия с охраны:
(i) Постановка на охрану.
(ii) 4 вспышки (желтый): отказ, 1 вспышка: нажатие клавиши.
(iii) Постановлено на охрану. (iv) Снято с охраны.
ЗАМЕНА БАТАРЕИ
Заменяйте батарею, как показано на рисунке, соблюдая полярность.
Конфигурации кнопок (все программируемые):
Действия кнопок:
Показать статус, постановка на охрану/задание области, снятие с охраны/задание области, фиксация
выхода, тайм-аут выхода и персональная атака.
Батарея:
Тип: 1 литий-марганцевый элемент, 3,0 В
Код изделия: BATT-KF1215
Предельное напряжение: 2,1 В ± 5 % (при 25 °C). Срок службы: до 2 лет.
Беспроводная передача данных:
Частота передачи: FM, узкая полоса.
Метод передачи: полностью зашифрованный динамический код.
Число комбинаций кода: 4294967295.
Материалы и окружающая среда:
Индикация: светодиоды (красный, зеленый, желтый)
Рабочая температура: от -10 до 40 °C (сертифицировано)
Размеры (В × Ш × Г): 72 × 30 × 20 мм.
Масса: 28 г
Совместимость с коммерческими панелями управления Enforcer, PCX и EURO (с помощью
беспроводного расширителя).
1
2
3
Технические характеристики
Riferimento schemi
REGISTRAZIONE PREDEFINITA
La registrazione del portachiavi avviene nel menu di gesone del pannello di controllo.
LED
1) LED generali:
(i) Dall’accensione: non registrato. (ii) Processo di registrazione.
(iii) Lampeggia per 8 volte: registrato.
(iv) Lampeggia rapidamente: sblocco. (v) Lampeggia rapidamente: blocco.
(vi) Lampeggia lentamente 18 volte (10 sec): problema a carico della nuova baeria installata.
(vii) Lampeggia 6 volte: allarme (durante controllo di stato)
2) LED di inserimento/disinserimento:
(i) Inserimento.
(ii) (Ambra) Lampeggia 4 volte: guasto, Lampeggia 1 volta: tasto premuto.
(iii) Inserito. (iv) Disinserito.
SOSTITUZIONE DELLA BATTERIA
Quando si sostuisce la baeria, assicurarsi che il polo posivo e negavo siano orienta come in figura.
Configurazione pulsan (tu programmabili):
Azione dei pulsan:
Mostra stato, Inserisci/Imposta area, Disinserisci/Imposta area, Uscita con chiusura, Uscita a tempo e Aacco
personale.
Baeria:
Tipo: 1 Cella Li-Mn da 3,0 V
Codice idenficavo: BATT-KF1215
Soglia: 2,1 V +/-5 % a 25 °C. Durata: Fino a 2 anni.
Wireless:
Frequenza di trasmissione: Ricetrasmetore FM a banda strea.
Metodo di trasmissione: Codice variabile completamente criptato.
Combinazioni di codice: 4294967295.
Materiali e ambiente:
Indicatori: Led (rosso, verde, ambra)
Temperatura operava: Da -10 °C a 40 °C (Cerficata)
Dimensioni (A x L x P): 72 × 30 × 20 mm
Peso: 28 g
Compabile con le centrali Enforcer, PCX ed EURO (con l’uso dell’espansione wireless).
1
2
3
Specifiche tecniche

Product specificaties

Merk: Hikvision
Categorie: Afstandsbediening
Model: DS-PKFS-4(868MHz)

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision DS-PKFS-4(868MHz) stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Afstandsbediening Hikvision

Hikvision

Hikvision DS-1105KI Handleiding

27 Februari 2024
Hikvision

Hikvision DS-C10S-HI4T Handleiding

7 Augustus 2023
Hikvision

Hikvision DS-C10S-HI4T-HD Handleiding

4 Augustus 2023
Hikvision

Hikvision DS-C30S-S23 Handleiding

4 Augustus 2023
Hikvision

Hikvision DS-1005KI Handleiding

4 Augustus 2023
Hikvision

Hikvision DS-C30S-S11 Handleiding

7 Juli 2023
Hikvision

Hikvision DS-PKFS-4(868MHz) Handleiding

10 Maart 2023
Hikvision

Hikvision DS-PKFE-5(868MHz) Handleiding

26 Februari 2023

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening

Nanlite

Nanlite BT-BCS-48V3.5mm Handleiding

21 December 2024
One For All

One For All Essence 4 KE1242 Handleiding

13 December 2024
Genaray

Genaray RSF-11-R Handleiding

12 December 2024
Genaray

Genaray ML-LSR Handleiding

12 December 2024
Genaray

Genaray MonoBright MB-WRT Handleiding

12 December 2024
Futaba

Futaba SBS-01V Handleiding

10 December 2024
Futaba

Futaba T3PV Handleiding

10 December 2024
Futaba

Futaba DLPH-1 Handleiding

10 December 2024
Audio-Technica

Audio-Technica AT-SL931HD Handleiding

6 December 2024
Velleman

Velleman DVRRC4 Handleiding

3 December 2024