Helix Match UP 7BMW Handleiding

Helix Niet gecategoriseerd Match UP 7BMW

Lees hieronder de 📖 handleiding in het Nederlandse voor Helix Match UP 7BMW (17 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/17

UP 7BMW

U P G R A D E

7-Kanal Plug & Play Upgrade-Verstärker mit integrier-

tem 8-Kanal 64 Bit DSP für BMW HiFi-Soundsysteme

7-channel Plug & Play upgrade amplier with integrat-

ed 8-channel 64 Bit DSP for BMW HiFi sound systems

deutsch / english

Dear Customer,

Congratulations on your purchase of this innovative

and high-qual ity MATCH product.

Thanks to more than 30 years of experience in

research and development of audio products this

amplier sets new standards in the evolving plug

& play market.

We wish you many hours of enjoyment with your

new MATCH UP 7BMW.

Yours,

AUDIOTEC FISCHER

General installation instructions for MATCH

components

To prevent damage to the unit and possible injury,

read this manual carefully and follow all installation

instructions. This product has been checked for

proper function prior to shipping and is guaranteed

against manufacturing defects.

Before starting your installation, disconnect the

battery’s negative terminal to prevent damage

totheunit,reand/orriskofinjury.

Install your UP 7BMW amplier only at the original

mounting place of the original amplier by using the

included mounting plate.

For a proper performance and to ensure full war-

ranty coverage, we strongly recommend to get this

product installed by an authorized MATCH dealer.

General instruction for connecting the UP 7BMW

amplier

The UP 7BMW amplier may only be installed in

motor vehicles which have a 12 Volts negative ter-

minal connected to the chassis ground. Any other

system could cause damage to the amplier and

the electrical system of the vehicle.

The positive cable from the battery for the entire

sound system should be provided with a main fuse

at a distance of max. 30 cm from the battery. The

value of the fuse is calculated from the maximum

total current draw of the car audio system.

Use only the included MATCH cable for con-

nection of the UP 7BMW. The use of other

cables can result in damage of the ampli-

er, the headunit / carradio orthe connected

loudspeakers! The fuses of the amplier may

only be replaced by identically rated fuses

(2x25A)toavoiddamageoftheamplier.

Prior to installation, plan the wire routing to avoid

any possible damage to the wire harness. All

cabling should be protected against possible

crushing or pinching hazards. Also avoid routing

cables close to potential noise sources such as

electric motors, high power accessories and other

vehicle harnesses.

Congratulations!

General instructions

Connectors and control units

1 Auto Remote

This switch allows to activate / deactivate the

automatic turn-on feature of the amplier

2 System Connector 2

Connector for the UP 7BMW cable harness.

Only use the original included connection

cable to connect the amplier to the factory

cable harness.

3 Clipping LED

This LED lights up red if one of the analog

inputs is overdriven.

4 System Connector 1

Connector for the UP 7BMW cable harness.

Only use the original included connection

cable to connect the amplier to the factory

cable harness.

5 Fuse LED

This LED will light up if the fuses inside the

amplier are blown.

6 +12 V

Optional connector for the +12 V power ca-

ble to the positive terminal of the battery.

7 GND

Optional connector for the ground cable

(negative terminal of the battery or metal

body of the vehicle).

8 REM

Optional connector for the remote cable.

1 2 3 4 5 6 7 8

9 USB Input

Connects the UP 7BMW to your PC.

10 Control pushbutton

Use this button to either switch between the

setups or initiate a reset of the device.

11 Status LED

This LED indicates the operating mode of

the amplier and the setup that has been

chosen.

12 Control Input

Multifunction interface for e.g. an optional

remote control or other MATCH UP 7BMW

accessory.

13 Optical Input

Optical input for digital stereo signals (SPDIF

format).

14 Gain

Control for adjusting the input sensitivity.

15 Remote Out

The remote output has to be used to turn on /

off external ampliers that are connected to

the .Line Out

16 Line Out

Mono line output for connecting external am-

pliers. Make sure that the remote output is

used to turn on these devices.

10 119 16151312 14

Product specificaties

Merk:	Helix
Categorie:	Niet gecategoriseerd
Model:	Match UP 7BMW

Heb je hulp nodig?

Als je hulp nodig hebt met Helix Match UP 7BMW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Helix

Helix BT HD Streamer Handleiding

3 September 2024

Helix Match MEC BT HD Handleiding

27 Augustus 2024

Helix Match UP 7BMW Handleiding

27 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo VPPI Handleiding

21 November 2024

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024

Festo SD-SUB-D-BU9 Handleiding

21 November 2024

Festo SAMH-F12-MK Handleiding

21 November 2024

Festo SFAB Handleiding

21 November 2024

Festo SFAH Handleiding

21 November 2024

Festo DRRD-12 Handleiding

21 November 2024

Festo SDE3 Handleiding

21 November 2024

Festo SFTE Handleiding

21 November 2024

Festo CRVZS-5 Handleiding

21 November 2024