Hegel HD2 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Hegel HD2 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 169 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Hegel HD2
High End external soundcard
USER GUIDE
Congratulations with your new HEGEL product.
Every Hegel product is based on a simple philosophy:
The audio reproduction instrument shall reproduce the original musical
sound, purely and naturally.
It shall use Scandinavian design reflecting natural music reproduction and
styling to fit in with any interior.
The products shall be easy to operate and shall be manufactured
according to the best quality principles.
All HEGEL products are created with acoustical instruments in a concert
situation as point of reference. The music is reproduced exactly like the
original and is limited only by the quality of the recording.
Our aim is to give you the best possible music experience!
USB HD2
R
Analog Output
L
Digital Hegel, Oslo
USB
Input
Output Norway
Connections:
The HD2 has one USB-B input, one
pair of unbalanced RCA analogue
outputs, and one Coaxial digital output
(spdif).
Connecting to your computer:
Connect a USB cable to the HD2 DAC and to your computer. When your
computer is on it will automatically install itself as an external sound-
card. And you are ready to play. If you have any problems you can consult
www.hegel.com/hd2_qa.htm for troubleshooting. The HD2 will receive
the neccessary power from the computers USB port.
Connecting to an analog audio amplifier:
1) Connect an RCA audio cable to the L+R ā€œAnalog Outputā€ terminals on
the HD2, and to the inputs of your amplifier. NOTE: Do not connect to
inputs named ā€œphonoā€, ā€œMain-inā€ or ā€œHome Theatreā€. If in doubt consult
the manual for your amplifier.
Connecting to a pair of active loudspeakers:
1) Make sure the computer’s volume control is set to its minimum setting
2) Connect the speakers to the ā€œAnalog Outputā€ terminals on your HD2.
3) Start playing music and adjust the volume on the computer to your
desired level.
Connecting to the digital input of an amplifier or other DAC:
1) Connect an Coaxial digital cable to the ā€œDigital Outputā€ terminal on
the HD2, and to a coaxial digital input on your amplifier or Dac.
2) You are ready to play.


Product specificaties

Merk: Hegel
Categorie: Niet gecategoriseerd
Model: HD2

Heb je hulp nodig?

Als je hulp nodig hebt met Hegel HD2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Hegel

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd