Heat1 Timer switch 4kW Handleiding

Heat1 Heater Timer switch 4kW

Lees hieronder de 📖 handleiding in het Nederlandse voor Heat1 Timer switch 4kW (12 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Good for you and the environment
Instructions
Brugsanvisning
Instruktions manual
Ohjeet
Timer switch
4 kW
5
Year
Warranty
GB
General safety instructions
Carefully read through the instruction manual prior to installation and store the manual safely. Keep the
manual for any questions of future use of your product. The product is designed and manufactured in
compliance with European standards: CE, RoHS.
Make sure the instructions are stored in the safe place for future reference.
Check if the voltage indicated on the nameplate of the control box corresponds to the local mains
voltage before installing the box.
The electricity load rating marked on the outlet must have enough current capability and correspond
to requirements of the power supply.
Do not cover the control box in any way.
During operation ensure the controller will have plenty of ventilation around the unit and that it will
not be covered with any fabrics in the area including curtains, tent, sides, ags etc.
Improper use of this controller can result in risk of electrical shock and/or re. Turn o the electricity
immediately. Do not try to repair the appliance by yourself. Please contact the dealer or a qualied
electrician for maintenance.
Turn o the electricity before performing any maintenance work.
Keep young children away from the controller. It is recommended to install the controller out of the
reach of children.
The box should only be installed by a qualited electrician.
Do not modify the controller by adding other programmers, timers, individual control system as this
may cause the unit to malfunction or catch re if installed incorrectly.
Maintenance and cleaning
Disconnect the plug from the socket before cleaning or when the product is not in use for prolonged
periods of time.
When cleaning, do not spray cleaners or water directly into the product.
Apply the cleaner on a cloth and wipe the product.
Regularly check the cord for damages and ensure that the plug is clean.
If the power cord, lamp or other electrical parts needs replacing, this must be done only by a
professional electrician.
Disposal
European directive 2002/96/EC on Electrical and Electronic Equipment Waste (WEEE), requires
that old household appliances are not thrown into the normal municipal waste stream. The
appliances should be collected separately to maximize the recovery and recycling of materials
and reduce the impact on human health and the environment. The symbol of the crossed o
dustbin is stamped on the product to recall the obligations of the separate collection. Consum
ers should contact their dealer or local authorities regarding the procedure to be followed for
the removal of their product.
Customer Service
Repairs must be carried out by authorized specialists, thus ensuring electrical safety.
Please contact with the service agent or a suitably qualied electrician.
Improper repairs could lead to danger to the user.
This warranty does not cover damage of failure which results from alteration, accident, misuse,
abuse, neglect, or improper maintenance.
In line with our policy of continuous product development we reserve the right to change the product
and documentation specications without notice.
2
GB 3
Specications
Model no: LDCB-D01
Voltage (V): 230VAC 50/60Hz~
Power consumption (W): 4000W Max
IP-class: IP65
Key Features & Control Details
Energy saving - provides heat for a pre-determined time period.
Extends Lamp Life.
Soft-start /zero-voltage switch-o.
Low-cost.
Easy to install.
Waterproof switch (IP65).
Timing knob allows the connected heater to be turned on for a set time between 1-60 minutes.
LED indicator: Flickers on standby.
Operation & Installation Instructions
Remove all packaging material and check the box and the waterproof outlets for signs of damage.
Pay attention to the mounting position and all mounting material. Use the mounting template
diagram (g. 1, page 5) to position the mounting holes.
Ensure the control box is not installed in an area that could be at risk of being exposed to extreme
adverse weather conditions.
Open the lid of the control box, connect the power cord and the heater power cable to the prompt
on the PCB. Consult the wiring diagram (g. 2, page 6).
Adjust the timer knob inside of the unit when installing for the desired heater operation time. This
can be set for between 1-60 minutes periods.
Return the lid of the box and tighten the screw.
Unit must be xed with glands facing down.


Product specificaties

Merk: Heat1
Categorie: Heater
Model: Timer switch 4kW

Heb je hulp nodig?

Als je hulp nodig hebt met Heat1 Timer switch 4kW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Heat1

Handleiding Heater

Nieuwste handleidingen voor Heater