Hawke Nite-Eye 2000 Handleiding

Hawke Niet gecategoriseerd Nite-Eye 2000

Lees hieronder de 📖 handleiding in het Nederlandse voor Hawke Nite-Eye 2000 (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
NITE-EYE 2000
3
OVERVIEW
• The Hawke Nite-Eye 2000 digital camera can be used for observation and photo/video capture in
complete darkness or low light conditions.
• View up to 200 meters in complete darkness using digital night vision technology.
• A built-in infrared illuminator provides additional light when in darker conditions. The infrared
strength can be adjusted to suit your situation.
• Quick and easy transfer of photos/videos and battery recharge via USB.
• Rechargeable 18650 lithium battery for extended performance and runtime.
BATTERY INSTALLATION
Unscrew the battery cover located underneath the front lens. Insert a 18650 battery, negative end
rst, then screw the battery cover back in place.
Notes:
• Only use 3.7V 18650 rechargeable batteries.
Ensure the battery has sufcient charge.
Ensure battery has been inserted negative end rst.
Ensure the battery is charged before rst use to increase life expectancy.
4
RECHARGING
The Nite-Eye 2000 is powered by a 18650 lithium battery. The battery can either be recharged in
the Nite-Eye 2000 unit, or separately if using a battery charger (not supplied).
• To charge the battery while installed in the camera, connect the power adaptor to the USB cable
and insert this into the mini-USB socket on the Nite-Eye 2000, located on the underside of the
unit, beneath the rubber ap.
• The LED charging indicator next to the mini-USB socket will glow red while the battery is
charging and turn off when it is fully charged.
• When recharging from mains power supply the Nite-Eye 2000 will automatically power on. If not
needed, the camera can be powered off by pressing and holding the ON/OK” button for 3 seconds.
• The Nite-Eye 2000 can also be charged by connecting directly to a computer via USB. In this
mode data transfer will also be available.
MEMORY CARD INSTALLATION
• The Nite-Eye 2000 accepts micro SD memory cards only.
• Memory card capacity between 2GB-32GB only.
• Install the micro SD memory card into the memory card socket located on the underside of the
unit, beneath the rubber ap.
Install micro SD memory card with exposed contacts rst and facing outwards.


Product specificaties

Merk: Hawke
Categorie: Niet gecategoriseerd
Model: Nite-Eye 2000

Heb je hulp nodig?

Als je hulp nodig hebt met Hawke Nite-Eye 2000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Hawke

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bogen

Bogen SPS2466 Handleiding

28 Februari 2025
Bogen

Bogen SPS2425 Handleiding

28 Februari 2025
Bogen

Bogen WB1EZ Handleiding

28 Februari 2025
Bogen

Bogen SM4T Handleiding

28 Februari 2025
Bogen

Bogen SI35A Handleiding

28 Februari 2025
Bogen

Bogen SPS2410 Handleiding

28 Februari 2025
Bogen

Bogen SLC Handleiding

28 Februari 2025