Hatco Glo-Ray GRAML-60D Handleiding

Hatco Lamp Glo-Ray GRAML-60D

Lees hieronder de 📖 handleiding in het Nederlandse voor Hatco Glo-Ray GRAML-60D (24 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
I&W #07.05.208.00
GLO-RAY®
Max Watt Infrared Strip Heaters
GRAM and GRAML Series
Installation and Operating Manual
Do not operate this equipment unless
you have read and understood the
contents of this manual! Failure to follow
the instructions contained in this manual
may result in serious injury or death.
This manual contains important safety
information concerning the
maintenance, use, and operation of this
product. If you’re unable to understand
the contents of this manual, please bring
it to the attention of your supervisor.
Keep this manual in a safe location for
future reference.
No opere este equipo al menos que haya
leído y comprendido el contenido de este
manual! Cualquier falla en el
seguimiento de las instrucciones
contenidas en este manual puede
resultar en un serio lesión o muerte. Este
manual contiene importante información
sobre seguridad concerniente al
mantenimiento, uso y operación de este
producto. Si usted no puede entender el
contenido de este manual por favor
pregunte a su supervisor. Almacenar
este manual en una localización segura
para la referencia futura.
© 2008 Hatco Corporation
i
CONTENTS
Form No. GRAMM-0508
INTRODUCTION
Hatco Glo-Ray®Max Watt Strip Heaters ensure
maximum food holding and minimize the risk of food-
borne illness. Optimum safety and quality is the result
of food held at the proper serving temperatures using
Glo-Ray’s pre-focused heat patterns. The pre-focused
heat pattern prevents foods from being over-cooked in
the middle and cooling off around the edges by
concentrating higher temperatures to the outer edges
of holding surfaces where heat loss is the greatest.
Utilizing specially designed reflectors to direct the heat
from the element, Glo-Ray Strip Heaters safely
maintain peak serving temperatures longer without
cooking the food beyond the point of excellence.
Glo-Ray Max Watt Strip Heaters are available from the
factory with or without shatter-resistant incandescent
lights to illuminate the warming area. These bulbs
have a special coating that guards against injury and
food contamination in the event of breakage.
Glo-Ray Max Watt Strip Heaters are a product of
extensive research and field testing. The materials
used were selected for maximum durability, attractive
appearance, and optimum performance. Every unit is
inspected and tested thoroughly prior to shipment.
This manual provides the installation, safety, and
operating instructions for Glo-Ray Max Watt Strip
Heaters. Hatco recommends all installation,
operating, and safety instructions appearing in this
manual be read prior to installation or operation of
the Strip Heaters.
Safety information that appears in this manual is
identified by the following signal word panels:
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION indicates a hazardous situation which,
if not avoided, could result in minor or moderate
injury.
NOTICE is used to address practices not related
to personal injury.
NOTICE
CAUTION
WARNING
Important Owner Information...............................i
Introduction ...........................................................i
Important Safety Information ..............................1
Model Designations .............................................2
Model Descriptions..............................................3
Specifications.......................................................4
Electrical Rating Charts...................................4
Dimensions......................................................6
Installation ............................................................7
General............................................................7
Minimum Clearance Requirements .................8
Recommended Mounting Heights ...................8
Assembly.........................................................9
Permanent Surface Mount ..............................9
Undershelf Mounting .....................................10
Overhead Mounting .......................................11
Electrical Wiring Hook-Up .............................12
Operation ............................................................13
Maintenance .......................................................14
General..........................................................14
Replacing Display Light Bulbs ......................14
Accessories ........................................................15
Troubleshooting Guide......................................16
Hatco Limited Warranty.....................................18
Authorized Parts Distributors...........Back Cover
IMPORTANT OWNER INFORMATION
Record the model number, serial number
(identification decal located on the underside of the
unit), voltage, and purchase date of your strip heater
in the spaces below. Please have this information
available when calling Hatco for service assistance.
Model No. ________________________________
Serial No. ________________________________
Voltage __________________________________
Date of Purchase __________________________
Business 8:00 a.m. to 5:00 p.m.
Hours: Central Standard Time
(Summer Hours: June to September –
8:00 a.m. to 5:00 p.m. C.S.T.
Monday through Thursday
8:00 a.m. to 2:30 p.m. C.S.T. Friday)
Telephone: (800) 558-0607; (414) 671-6350
Fax: (800) 690-2966 (Parts and Service)
(414) 671-3976 (International)
24 Hour 7 Day Parts and Service
Assistance available in the
United States and Canada
by calling (800) 558-0607.
Additional information can be found by visiting our
web site at .www.hatcocorp.com
IMPORTANT SAFETY INFORMATION
Form No. GRAMM-0508 1
ELECTRIC SHOCK HAZARD:
• For hard-wired units, all electrical
connections must be in accordance with
local electrical codes and any other
applicable codes. Connections should be
made by a qualified, licensed electrician.
• Units equipped with a cord and plug supplied
by Hatco must be plugged into a properly
grounded electrical outlet of the correct
voltage, size, and plug configuration. If the
plug and receptacle do not match, contact a
qualified electrician to determine and install
the proper voltage and size electrical outlet.
• Unplug the power cord or turn the power OFF
at the fused disconnect switch/circuit
breaker and allow the unit to cool before
performing any maintenance or cleaning.
• Discontinue use if power cord is frayed or
worn.
• Do not attempt to repair or replace a
damaged power cord. The cord must be
replaced by Hatco, an Authorized Hatco
Service Agent, or a person with similar
qualifications.
• DO NOT submerge or saturate with water.
Unit is not waterproof. Do not operate if unit
has been submerged or saturated with water.
• This unit is not “jet-proof” construction. Do
not use jet-clean spray to clean this unit.
• Use only Genuine Hatco Replacement Parts
when service is required. Failure to use
Genuine Hatco Replacement Parts will void
all warranties and may subject operators of
the equipment to hazardous electrical
voltage, resulting in electrical shock or burn.
Genuine Hatco Replacement Parts are
specified to operate safely in the
environments in which they are used. Some
aftermarket or generic replacement parts do
not have the characteristics that will allow
them to operate safely in Hatco equipment.
WARNING
FIRE HAZARD:
• Do not install Glo-Ray Max Watt strip heaters
above or around combustible surfaces.
Discoloration or combustion could occur.
Glo-Ray Max Watt strip heaters must be
installed in non-combustible surroundings
only.
• Do not store or use gasoline or other
flammable vapors or liquids in the vicinity of
this or any other appliance.
Use only light bulbs that meet or exceed
(National Sanitation Foundation (NSF)
standards and are specifically designed for food
holding areas. Breakage of light bulbs not
specially coated could result in personal injury
and/or food contamination.
For installation with chains, make sure the
chains have sufficient strength and are securely
fastened to both the unit and the mounting
location. Poorly installed chains may cause the
unit to loosen and fall. Do not place anything on
top of units installed with chains.
This unit has no “user-serviceable” parts. If
service is required on this unit, contact an
Authorized Hatco Service Agent or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966; or International
fax 414-671-3976.
WARNING
Read the following important safety information before using this equipment to avoid
serious injury or death and to avoid damage to equipment or property.

Product specificaties

Merk: Hatco
Categorie: Lamp
Model: Glo-Ray GRAML-60D

Heb je hulp nodig?

Als je hulp nodig hebt met Hatco Glo-Ray GRAML-60D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Lamp Hatco

Hatco

Hatco Ultra-Glo UGAL-48D Handleiding

9 Juli 2023
Hatco

Hatco Glo-Ray GRAML-60D Handleiding

4 Juli 2023
Hatco

Hatco Ultra-Glo UGAL-54D Handleiding

2 Juli 2023
Hatco

Hatco Glo-ray GRAML-54D Handleiding

27 Juni 2023
Hatco

Hatco DCS400-1 Handleiding

25 Juni 2023

Handleiding Lamp

Nieuwste handleidingen voor Lamp

EMOS

EMOS P3304 Handleiding

2 December 2024
EMOS

EMOS P3111 Handleiding

2 December 2024
EMOS

EMOS P3380 Handleiding

2 December 2024
EMOS

EMOS P2307 Handleiding

2 December 2024
EMOS

EMOS P2311 Handleiding

2 December 2024
EMOS

EMOS P3114 Handleiding

2 December 2024
EMOS

EMOS P3115 Handleiding

2 December 2024
EMOS

EMOS P2313 Handleiding

2 December 2024
EMOS

EMOS DCWW31 Handleiding

2 December 2024
Brennenstuhl

Brennenstuhl WL 550 Handleiding

1 December 2024