Harley Benton CLD-41S WN Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Harley Benton CLD-41S WN (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
2x2 CONTROLS
Waveforms
In 2x2, you have two song parts each with two
parallel tracks, for a total of four unique tracks.
SINGLE TAP:
●Stop playback of all tracks
●Resume playback of all
tracks
DOUBLE TAP:
●Immediately stop playback
of all tracks
HOLD (when stopped) :
●Delete everything and start
the song over
PLAY/STOP ALL
SINGLE TAP:
●Change between song parts
HOLD:
●Open the Mixer
NEXT PART
VOLUME WHEEL
Use the volume wheel to control the master
output volume at any time.
On-screen label text describes the SINGLE
TAP commands of the bottom three buttons
The thin bars on the right show the L and R
input volume levels. If the bars are red you
are clipping and you should lower the
volume of your instrument.
In the Mixer: You can use the volume
wheel to control the relative volume levels
of each track.
Currently recording new track
Currently selected layer
Layer is not selected
Currently recording
Layer is undone. Undone layer
can be brought back or overwritten
Muted track
Overdubs: You can have
unlimited overdubs, but
each new overdub will
merge the previous overdub
to the base layer. So you can
have at most two layers per
track -- your base layer and
your most recent overdub
layer.
For each track, the most
recent overdub is merged
with the base layer when the
song is saved. This frees up
internal memory.
BOTTOM TRACK (middle) & TOP TRACK (right)
SINGLE TAP:
●Record (if track is blank)
●Playback recording
●Overdub
●Playback overdub
DOUBLE TAP:
●Mute
β—‹Single tap to unmute
HOLD:
●Undo most recent layer
β—‹Continue to hold: undo 2nd layer
β—‹If all layers undone: single tap to
overwrite track
●Redo most recent layer
β—‹Continue to hold: redo overdub
Page 1/2
6x6 CONTROLS
Track Clocks
In 6x6, you have six song parts each with six
parallel tracks, for a total of 36 unique tracks.
SINGLE TAP:
●Stop playback of all tracks
●Resume playback of all
tracks
DOUBLE TAP:
●Immediately stop playback
of all tracks
HOLD (when stopped) :
●Delete everything and start
the song over
PLAY/STOP ALL
SINGLE TAP:
●Select next song part
β—‹Use Track Action button
to change to selected
song part
HOLD:
●Open the Mixer
SELECT PART
VOLUME WHEEL
Use the volume wheel to control the master
output volume at any time.
The thin bars on the right show the L and R
input volume levels. If the bars are red you
are clipping and you should lower the
volume of your instrument.
In the Mixer: You can use the volume
wheel to control the relative volume levels
of each track.
SELECT TRACK TRACK ACTION
SINGLE TAP:
●Record (if track or song part is blank)
●Playback recording
●Overdub
●Playback overdub
DOUBLE TAP:
●Mute
β—‹Single tap to unmute
HOLD:
●Undo most recent layer
β—‹Continue to hold: undo 2nd layer
β—‹If all layers undone: tap to overwrite
track
●Redo most recent layer
β—‹Continue to hold: redo overdub
SINGLE TAP:
●Select next track
New track is currently being recorded
Currently selected track
Track is being overdubbed
Entire track is muted
Overdub is undone
All layers undone
Track not selected
On-screen label text describes the SINGLE
TAP commands of the bottom three buttons
Page 2/2


Product specificaties

Merk: Harley Benton
Categorie: Niet gecategoriseerd
Model: CLD-41S WN

Heb je hulp nodig?

Als je hulp nodig hebt met Harley Benton CLD-41S WN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Harley Benton

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd