Hager EE873 Handleiding
Hager
Bewegingsdetector
EE873
Lees hieronder de đ handleiding in het Nederlandse voor Hager EE873 (4 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
+ 90°/- 30°
+/-80°
Description
Detection zone
Installation
Setting
Shutters
1
2
Connection by PIN system
(4 plug-in pins)
α = 220/360°
The optimal height of installation is 2.5 m.
The detection field must remain free.
2,5 m
LED A LED B
Accessories for corner î xing
8 m 16 m Ă 6 m
16 m
4 m
Plate for wall îș xing
Swivelling detection head
Vertical adjustment
Setting potentiometers
Fixed time
(length of time
of lighting)
Luminosity Sensitivity
(modification
of the range)
Caution!
This device is to be installed only by a professional
electrician îș tter according to local applicable
installation standards.
Do not plug in or unplug this product when it is live.
DETECTOR 220/360°
EE870 White
EE871 Charcoal
ACCESSORY FOR
CORNER FIXING
EE855 White
EE856 Charcoal
6E7582.C1
6E7582.C
EE87.
izMotion detectors comfort 220/360°
For use in Australia and New Zealand
Operating precautions
In order to obtain optimal detection conditions, it is recommended that the following advice:
- the detection is sensitive to solar radiation and bad weather. Detection performance is optimal up to
35 °C and above 40 °C.
- It is preferable to maintain Ă distance of 1 m. between a light source and the detector.
When mounting on a box, make sure that you do not distort the wall plate through excessive tightening
of the screws.
Montage
Surface-mounting or ceiling-mounted :
- îșx the wall plate using the screws provided
- connect the wall plate terminal block (see cabling plans in annex)
- fully insert the detector on the wall plate
- tighten the screws to ensure the product is sealed.
For corner îșxing, the wall plate is to be îșxed between the accessory and the detector.
Cable entry (breakable partitions) are possible:
- by the back (box mounting) or by the bottom.
LN S'
60 mm
N
L
S'
Ateha raceways
ref. ATA 12200
or ATA 63000
Wiring and connections (provide installation with îxed wiring)
Action Settings Potentiometer
Use Auto settings
(factory) or set by
the remote control
to switch the light
automatically for a
given time.
Auto Settings
Put the Lux potentiometer on
âauto testâ.
The settings are predefined:
Lux = o
(operating at night only)
time = 3 min,
sensitivity = max.
Remote control settings
(Manual Settings inhibited).
Automatically switch
on the light for a
defined time.
Installer settings
Control a timer, a bell
etc.
Impuls V
Auto settings are usable with
time = 1s. (cannot be changed)
Test and validate the
detection zone.
Test mode
Move the potentiometer to 2
âauto testâ. On this position, the
remote control can be used.
Adjust the sensitivity. Allows setting the range
to avoid disturbance.
âNormalâ operation (on/off)
The lighting is activated whenever the level of
luminosity deîșned by the potentiometer 2 is
judged to be insufîșcient and a movement is
detected.
After detection, the light stays on for the length
of time predeîșned by the potentiometer 1.
The îșxed timing is reset after each detection.
Please note: when the potentiometer is on âauto
testâ, the settings are predeîșned.
Control by timer
An impulse is generated every 10 s whenever the
level of luminosity is judged to be insufîșcient and
a movement is detected when the potentiometer
1 is on .V
This pulse mode is not suitable for connections to
power devices (except at low power loads).
Using the remote control (option,
ref. EE806)
The detector receives instructions from the remote
control when the Lux potentiometer is on the âauto
testâ position.
If the potentiometer is put on another value, the
local setting resumes.
The LED B of the detector lights up to confirm the
signal with the remote control.
It flashes quickly for 2 s when an instruction is
received and 5 s for a reset.
When an instruction is not authorised, the LED
lights up for 1 s.
The available settings are:
- fixed time
- level of luminosity
- sensitivity
- on / off
- holidays (simulation of presence)
- activation of the detection A.
Testing and validating
the detection zone
Put the potentiometer on Test mode and if 2
necessary, use the shutters to define the detection
zone.
The Test mode is available for 3 min. Every
movement detected switches on the light for 1s.
After 3 min without detection of movement, the
product returns to normal operation.
Limiting the detection zone
You can limit the detection zone by using the
shutters provided or by tilting the head.
Product presentation
and operating principles
This detector allows automatic control of a
light source for a deîșned length of time when a
movement is detected in the surveillance zone.
The LED A indicates a movement. It is inhibited by
default except in Test mode.
Settings and Test
The detectors have 2 modes of operation:
Fixed time and Control by timer.
Power supply
The detector switches the light on for 40 s.
After 40 s, it activates the Normal mode.
6E7582.C2
6E7582.C3
+ 90°/- 30°
+/-80°
Beschrijving
Detectiezone
Installatie
Instelling
Afdekplaten
1
2
Aansluiting d.m.v. PEN-systeem
(4 insteekbare pennen)
α = 220/360°
De optimale montagehoogte bedraagt 2,5 m.
Het detectieveld moet vrij zijn.
2,5 m
LED A LED B
Toebehoren voor hoekmontage
8 m 16 m Ă 6 m
16 m
4 m
6E7582.C
EE87.
ziBewegingsmelders comfort
220/360°
Wandmontageplaat
Draaibare detectiekop
Verticale instelling
Instelpotentiometers
Lichtsterkte Gevoeligheid
(wijziging van het
bereik)
Tijdvertraging
(verlichtingsduur)
Opgelet!
Het toestel mag alleen door een elektroinstallateur
worden geĂŻnstalleerd volgens de installatienormen
die van toepassing zijn in het land.
De contactpennen van het product niet vast- of
loskoppelen wanneer het onder spanning staat.
220/360°-
BEWEGINGSMELDER
EE870 Wit
EE871 Zwart
TOEBEHOREN VOOR
HOEKMONTAGE
EE855 Wit
EE856 Zwart
Product specificaties
| Merk: | Hager |
| Categorie: | Bewegingsdetector |
| Model: | EE873 |
Heb je hulp nodig?
Als je hulp nodig hebt met Hager EE873 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewegingsdetector Hager
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
Handleiding Bewegingsdetector
- Bewegingsdetector Philips
- Bewegingsdetector Gigaset
- Bewegingsdetector Honeywell
- Bewegingsdetector Abus
- Bewegingsdetector ACME
- Bewegingsdetector Alecto
- Bewegingsdetector Axis
- Bewegingsdetector Berker
- Bewegingsdetector Blaupunkt
- Bewegingsdetector Brinno
- Bewegingsdetector D-Link
- Bewegingsdetector DESQ
- Bewegingsdetector Devolo
- Bewegingsdetector Eaton
- Bewegingsdetector Elgato
- Bewegingsdetector Eminent
- Bewegingsdetector EQ-3
- Bewegingsdetector ESYLUX
- Bewegingsdetector Gira
- Bewegingsdetector Goobay
- Bewegingsdetector Grothe
- Bewegingsdetector Hikvision
- Bewegingsdetector HQ
- Bewegingsdetector Iget
- Bewegingsdetector Interlogix
- Bewegingsdetector KlikaanKlikuit
- Bewegingsdetector Kogan
- Bewegingsdetector Konig
- Bewegingsdetector Kopp
- Bewegingsdetector Marmitek
- Bewegingsdetector Nedis
- Bewegingsdetector Niko
- Bewegingsdetector Perel
- Bewegingsdetector Powerfix
- Bewegingsdetector Renkforce
- Bewegingsdetector Satel
- Bewegingsdetector Schneider
- Bewegingsdetector Smartwares
- Bewegingsdetector Somfy
- Bewegingsdetector Steinel
- Bewegingsdetector Suevia
- Bewegingsdetector Theben
- Bewegingsdetector TP Link
- Bewegingsdetector Trust
- Bewegingsdetector V-Tac
- Bewegingsdetector Velleman
- Bewegingsdetector Xavax
- Bewegingsdetector Yale
- Bewegingsdetector Joy-it
- Bewegingsdetector Jung
- Bewegingsdetector Olympia
- Bewegingsdetector Optex
- Bewegingsdetector Orbis
- Bewegingsdetector Schwaiger
- Bewegingsdetector Steren
- Bewegingsdetector Cotech
- Bewegingsdetector Arlo
- Bewegingsdetector Techly
- Bewegingsdetector DSC
- Bewegingsdetector Merten
- Bewegingsdetector Chacon
- Bewegingsdetector Nexa
- Bewegingsdetector Swann
- Bewegingsdetector Vemer
- Bewegingsdetector Fibaro
- Bewegingsdetector GEV
- Bewegingsdetector Lucide
- Bewegingsdetector Massive
- Bewegingsdetector XQ-Lite
- Bewegingsdetector Chamberlain
- Bewegingsdetector Dahua Technology
- Bewegingsdetector Speed-Link
- Bewegingsdetector Aqua Joe
- Bewegingsdetector Busch-Jaeger
- Bewegingsdetector EVE
- Bewegingsdetector Wentronic
- Bewegingsdetector EQ3
- Bewegingsdetector Homematic IP
- Bewegingsdetector Extron
- Bewegingsdetector Vernier
- Bewegingsdetector Crestron
- Bewegingsdetector Chuango
- Bewegingsdetector ORNO
- Bewegingsdetector Maxsa
- Bewegingsdetector Vimar
- Bewegingsdetector Legrand
- Bewegingsdetector Intertechno
- Bewegingsdetector Inovonics
- Bewegingsdetector Bitron
- Bewegingsdetector InLine
- Bewegingsdetector EtiamPro
- Bewegingsdetector Pentatech
- Bewegingsdetector RAB
- Bewegingsdetector BEA
- Bewegingsdetector Tellur
- Bewegingsdetector Megatron
- Bewegingsdetector Ledvance
- Bewegingsdetector Gewiss
- Bewegingsdetector ALC
- Bewegingsdetector Avigilon
- Bewegingsdetector Pepperl+Fuchs
Nieuwste handleidingen voor Bewegingsdetector
3 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024