Grundig RC-7-1 Handleiding

Grundig Afstandsbediening RC-7-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Grundig RC-7-1 (12 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 183 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
8_manual.indd 1 22-09-2008 13:5
1. IR Transmitter
2. POWER Key
3. Device Keys
4. Number Keys
5. TV/AV Key
6. Video Recorder Keys
7. LED indicator
8. SET-UP Key
9. Mute Key
10. Fastext Keys
T
tr
g
m
yo
•
1
2
3
4
•
T
1
2
3
4
5
6
7
•
T
to
T
1
2
3
A
8_manual.indd 2 22-09-2008 13:5
Thank you for purchasing the universal remote con-RC-7-1
trol.Before you can use your new remote, you will need to pro-
gram it to operate the speciî‚¿c A/V home entertainment equip-
ment you wish to control. Simply enter proper device codes for
your equipment and it is ready to use.
• BATTERY INSTALLATION / CHANGE
1. On the back of the ,RC-7-1
pull the battery compartment cover.
2. Insert two (2) AAA new Alkaline
batteries.
3. Match the (+) and (-) poles correctly
aligned into the battery compartment.
4. Close the battery compartment.
NOTE: Removing the batteries for
more than 2 minutes will require you to reprogram your re-
mote.
• SETTING UP BY DIRECT ENTRY
To program your to operate your TV:RC-7-1
1. Turn on your TV.
2. Press & hold the key and press the key once. At this
time, the red LED light will light up.
3. Release the key and key.
4. Enter the 4-Digit TV code from the code list for your brand
equipment. If you perform this procedure correctly, the red
LED light will go out. Otherwise, the red LED ashes 2
times.
5. Aim the RC-7-1 at your TV and press key. Your TV should
turn off. If none of the keys or only some of the keys operate
your TV, repeat Steps 2-4, trying each code listed for your
brand until you î‚¿nd the one that operates your TV.
6. Your is now programmed to operate your TV. Write RC-7-1
down your TV code on the label at the back of the RC-7-1
for future reference.
7. To program other equipment, repeat the Steps 1-6 for your
DVD, SAT, AUDIO and or your second TV or DVD.
NOTE: To leave the SETUP during the code entering, just
press any of the keys once. In other cases, if no [DEVICE]
code is entered within 10 seconds, the red LED light will go
out automatically.
• SETTING UP BY AUTO SEARCH
This auto search method checks all its preprogrammed codes
to î‚¿nd the code that will operate your equipment automatically.
This method may take a few minutes.
1. Turn on your TV and press the device mode as .
2. Aim the at your TV.RC-7-1
3. Press & hold the key and key at the same time for 3
seconds until the red LED lights up. Then release the key
and key. is now performed.AUTO SEARCH
Keep
press
A
8_manual.indd 3 22-09-2008 13:5

Product specificaties

Merk: Grundig
Categorie: Afstandsbediening
Model: RC-7-1

Heb je hulp nodig?

Als je hulp nodig hebt met Grundig RC-7-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Afstandsbediening Grundig

Grundig

Grundig RC-7-1 Handleiding

17 Augustus 2022

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening

Nanlite

Nanlite BT-BCS-48V3.5mm Handleiding

21 December 2024
One For All

One For All Essence 4 KE1242 Handleiding

13 December 2024
Genaray

Genaray RSF-11-R Handleiding

12 December 2024
Genaray

Genaray ML-LSR Handleiding

12 December 2024
Genaray

Genaray MonoBright MB-WRT Handleiding

12 December 2024
Futaba

Futaba SBS-01V Handleiding

10 December 2024
Futaba

Futaba T3PV Handleiding

10 December 2024
Futaba

Futaba DLPH-1 Handleiding

10 December 2024
Audio-Technica

Audio-Technica AT-SL931HD Handleiding

6 December 2024
Velleman

Velleman DVRRC4 Handleiding

3 December 2024