Gossen Metrawatt SMARTCONTROL Handleiding

Gossen Metrawatt Smarth home SMARTCONTROL

Lees hieronder de đź“– handleiding in het Nederlandse voor Gossen Metrawatt SMARTCONTROL (24 pagina's) in de categorie Smarth home. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
Operating Instructions
 
SMART CONTROL | ECS 3-349-423-03
Energy Management-System 4/5 9.1
2013
Please note: This software is protected by German copyright and international treaties.
Unauthorized copying or distribution of this software, either in part or in its entirely, is subject
to prosecution by law.
2 -I Messtechnik GmbH GMC
1 Range of Applications
Diverse Data Collector and Data Messenger
The SMARTCONTROL renders energy consumption measurable without delay in a detailed
fashion, and thus controllable. This, in turn, is the basic prerequisite for a great variety of
measures for the reduction of energy consumption and costs, for example with regard
to:
- Optimized utilization
- Contracting
- Component modernization
- Conversion
The SMARTCONTROL is an inexpensive, user-friendly, easy to integrate data logging
system. This is the prerequisite for quickly establishing efficient, sustainable, widespread
energy management for buildings and properties.
Amongst other data, the SMARTCONTROL is capable of recording the following:
- Meter readings (electrical power, heat, water, gas etc.)
- Temperatures (inside, outside, inlet, return etc.)
- Statuses (burner and pump on-times etc.)
- Analog signals from external signal converters and measuring transducers (pressure,
humidity etc.)
- M-Bus protocol (up to 450 meters), ModBus, SBus, CLBus, LON
One of the system’s important advantages is its ability to access all relevant data at any
t quickly and conveniently. ime –
We are at your disposal and can provide you with solutions if you want to make actual
energy consumption more transparent in the future, and optimize it as well.
Information regarding all facets of GMC-I Messtechnik GmbH, as well as other industry
information, can be accessed at:
GMC-I Messtechnik GmbH
SĂĽdwestpark 15
90449 NĂĽrnberg, Germany
Phone: +49 (0) 911 8602-111
Fax: +49 (0) 911 8602-777
e-mail: info@gossenmetrawatt.com
Internet: www.gossenmetrawatt.com
Operating Instructions
3 -I Messtechnik GmbH GMC
Table of Contents
1 SMARTCONTROL Manager Software .............................................................. 5
1.1 Installation .................................................................................................... 5
1.2 Overview ....................................................................................................... 6
1.3 User Interface ............................................................................................... 6
Menu Bar ............................................................................................................. 6
Toolbar(s) ............................................................................................................ 7
Status Line 8..........................................................................................................
Scenario Browser .................................................................................................. 9
Network Toolbar ................................................................................................... 9
Data Toolbar ...................................................................................................... 10
OPC Server Toolbar ............................................................................................. 10
Toggle Tab Bars .................................................................................................. 10
Message Window ................................................................................................ 10
Numeric Format for Entering Values ....................................................................... 11
1.4 Entering Projects, Buildings and Devices With the Application Assistant .... 11
1.5 Entering Projects, Buildings and Devices Without the Application Assistant 12
1.6 The “Configuration” Tab .............................................................................. 16
TCP/IP ............................................................................................................... 16
Router ............................................................................................................... 16
e-mail Recipients ................................................................................................ 17
TCP/IP Recipients ................................................................................................ 17
Phone Recipients ................................................................................................. 18
Configuring Error Indication Tip: Refer to the online help as well! .............................. 19
Time ................................................................................................................. 21
Modem .............................................................................................................. 23
Information ........................................................................................................ 23
1.7 The “Calibration” Tab .................................................................................. 24
Temperature Sensor ............................................................................................ 24
A-D Converter .................................................................................................... 25
Meter (digital inputs) ........................................................................................... 26
Status (digital inputs) .......................................................................................... 28
Relay Start Status ............................................................................................... 28
Access Rights ..................................................................................................... 29
1.8 The “Programming” Tab, Commands ........................................................... 30
Program Priorities ............................................................................................... 33
Program Command Attributes in Tabular View ......................................................... 34
Finding Program Commands ................................................................................. 35
Transmitting Programs to the SMARTCONTROL and Starting Them ............................. 35
Restarting the SMARTCONTROL ............................................................................36
M-Bus Command Type ......................................................................................... 37
M-Bus Application Command Type ......................................................................... 39
Calculator Command Type .................................................................................... 41
Formula Calculator Command Type ........................................................................ 43
Timer Program Command Type ............................................................................. 46
Multifunctional Timer Command Type Tip: Refer to the online help as well! ................. 48
Power Calculator Command Type Tip: Refer to the online help as well! ..................... 50

Product specificaties

Merk: Gossen Metrawatt
Categorie: Smarth home
Model: SMARTCONTROL

Heb je hulp nodig?

Als je hulp nodig hebt met Gossen Metrawatt SMARTCONTROL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Smarth home Gossen Metrawatt

Gossen Metrawatt

Gossen Metrawatt SMARTCONTROL Handleiding

11 Maart 2024

Handleiding Smarth home

Nieuwste handleidingen voor Smarth home

Kogan

Kogan KASHCDIOS2A Handleiding

23 December 2024
Kogan

Kogan KASHAIRTG1B Handleiding

23 December 2024
Kogan

Kogan KASHTAGSM1A Handleiding

23 December 2024
TP Link

TP Link KS230 V2 Handleiding

11 December 2024
Delta Dore

Delta Dore Tywell Starter Handleiding

9 December 2024
Asus

Asus SmartHome Gateway HG100 Handleiding

9 December 2024
Hikvision

Hikvision DS-PI-D40/FM Handleiding

8 December 2024
Burg-Wachter

Burg-Wachter Entry easy 7600 Handleiding

6 December 2024
Acer

Acer Halo Swing HSP5100G Handleiding

5 December 2024
TP Link

TP Link Tapo S200B Handleiding

3 December 2024