Gossen Metrawatt K21 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Gossen Metrawatt K21 (8 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
K21
MULTIFUNCTIONAL POWER
MONITOR
INSTRUCTION MANUAL
V.01 12-07
K21 MULTIFUNCTIONAL POWER MONITOR
- 2 -
1- PRECAUTIONS OF INSTALLATION AND USE.
¡
NOT FOLLOWING THIS INSTRUCTIONS
MAY CAUSE INJURES OR DEATH
!
• Disconnect the power before starting to work on the equipment.
• When the instrument is connected to power supply do not remove the front panel.
• Do not clean the instrument with solvents. Use only dry cloth.
• Check the correct terminals in the cabling.
• The service of the instrument should only be performed by the supplier.
• The manufacturer and its subsidiaries do not assume responsibility for the
consequences from the use of this equipment.
• The assembly should be only in panel.
K21 MULTIFUNCTIONAL POWER MONITOR
- 3 -
2- INSTRUCTIONS ON USE.
The multifunctional power monitor K21 lets you monitor the electrical parameters of the
network and view them in 5 displays
.
The parameters that can be displayed are:
• Phase values.
• Totals values of Active Power (imported and exported), Aparent Power and
Frequency.
• Totals values of Reactive Power (imported and exported)and cos φ (for
imported and exported power).
• Energy counters.
The instrument provides 4 meters, kWh (Imp. and Exp) and kVArh (Imp. and Exp.).
The last 4 displays are used simultaneously to constitute a piece of 12 (4x3) digits
• Maximun, minimum and average values.
Maximum value ........................................................
Minimum value ........................................................
Average value .........................................................
Instantaneous value WITHOUT ILLUMINATION
NOTE: The exported power is indicated with a blinking point so inverted polarity problems
in the installatión can be detected easily.
Push the button to access to the
desired parameter.
Push the button to access to the
desired parameter.
Push the button to access to the
desired parameter.
Push the button to access to the
desired parameter.


Product specificaties

Merk: Gossen Metrawatt
Categorie: Meetapparatuur
Model: K21

Heb je hulp nodig?

Als je hulp nodig hebt met Gossen Metrawatt K21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur Gossen Metrawatt

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur