GLP iQ.Tool Pro Handleiding

GLP Niet gecategoriseerd iQ.Tool Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor GLP iQ.Tool Pro (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

GLP iQ.Tool / iQ.Tool Pro

Quick Start Guide

Rev. 2024 -01 1010

General information

The GLP iQ.Tool allows you to manage GLP lighting fixtures from a mobile device using the GLP

iQ.Service app. is available in two versions: the and . The Pro version includes a It iQ.Tool iQ.Tool Pro

spectral light sensor.

Use the device only as described in the operating instructions. Failure to observe these

instructions may impair the degree of protection provided by the measuring device.

The iQ.Tool is rated IP 20 and is for indoor use only. Do not allow it to become wet.

Technical data

iQ.Tool

Input voltage: 5 VDC

Wireless protocols: Bluetooth Low Energy v.4.2, 2.4 GHz

Battery type: LiPo 700 mAh

Battery operation time: up to24h

Battery standby time: Up to 1 week

Operating environment: Indoor use only

IP Rating: IP 20

Size: 30x30x104mm

Weight: 73g

Included items

GLP iQ.Tool device

USB-C to USB-C cable

Quick-start manual

Protective case with belt loop

iQ.Tool Pro

Spectral sensor

Input voltage: 5 VDC

Wireless protocols: Bluetooth Low Energy n.4.2, 2.4 GHz

Battery type: LiPo 700 mAh

Battery operation time: up to24h

Battery standby time: Up to 1 week

Operating environment: Indoor use only

IP Rating: IP 20

Size: 30x30x104mm

Weight: 73g

Included items

GLP iQ.Tool device

USB-C to USB-C cable

Quick-start manual

Protective case with belt loop

Waste disposal

As a consumer, you are required to return old devices to the manufacturer or to a designated collection point for the

disposal of electrical and electronic equipment in order to ensure environmentally-friendly disposal. Observe the

current regulations in your location. This product and its packaging have been manufactured using high-quality

materials and components that can be recycled and reused. This reduces waste and protects the environment.

Dispose of the packaging in an environmentally-friendly manner a designated collection point. at

This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive

(WEEE). It contains a non-removable rechargeable battery. Do not dispose of the product in ordinary

household waste.

Warning! Incorrect disposal of batteries creates a hazard to the environment and to health!

Batteries and rechargeable batteries must never be disposed of with household waste. They contain

pollutants such as heavy metals which can be harmful to the environment and human health if disposed

of improperly. Valuable raw materials such as iron, zinc, manganese or nickel can be recovered from

battery waste. As a consumer, you are legally obliged to hand in used batteries and rechargeable batteries for

environmentally-friendly disposal at retailers or appropriate collection points in accordance with national or local

regulations. The return service is free of charge. You can obtain addresses of suitable collection points from your city

council or local authority.

Do not litter the environment by leaving batteries (or electrical and electronic devices that contain them) lying

around carelessly. The separate collection and recycling of batteries and rechargeable batteries makes an important

contribution to relieving the impact on the environment and avoiding health risks.

A Light sensor/spectral sensor (iQ.Tool –

Pro only)

B Power On/Off switch –

C Linking/Unlinking switch –

D XLR connector (female) –

E Status LED (green) power On / Off –

F Status LED (blue) link status –

G Status LED (red) battery charging –

H Status LED (green) battery fully –

charged

I USB-C socket –

Get ready to start!

Fully charge the GLP iQ.Tool via its USB-C port using the included USB-C charging cable and a

standard USB charger. The status LED flashes red during charging and Status LED lights G H

constant green when charging is complete.

Download and install the GLP iQ.Service

app:

Start the iQ.Service app.

If you do not already have a GLP iQ.Service

account, register the iQ.Service app by

clicking on ‘Register’ and following the

instructions on your device.

Connecting to the iQ.Service app

Switch on the iQ.Tool

by holding button B

for 3 seconds until

the green status LED

E lights continuously.

Start the GLP

iQ.Service app on

your device.

Optional: Perform

any library updates

offered if necessary.

See in illustration 1

on previous page.

Select the Discover

page at the bottom

of the screen.

See . Swipe your finger down the center of the screen to start scanning. 2

After successful scanning, the iQ.Tool will now appear in the list of recognized devices.

See and . Click on the icon to connect directly to the iQ.Tool. 3 4

Using the iQ.Tool

To use the iQ.Tool, plug its XLR connector into the DMX IN socket of the fixture or daisy-chain of fixtures

that you want to manage, then switch on the iQ.Tool and connect it to the iQ.Service app as described

above. You can now for example:

• Configure fixtures (set the start address, select the control mode, adjust device-specific settings, load

factory defaults, etc.).

• Update firmware in single fixtures or multiple fixtures in a daisy chain.

• See fixture data and timer readouts.

• Send and receive RDM and DMX data.

See www.glp.de for further information.

Recharge the battery via USB when the red LED lights up. iQ.Tool’s ‘Battery low’

trademarks registered as the property of German Light Products GmbH in Germany, in the United States of

America and in other countries.

The information contained in this document is subject to change without notice. German Light Products GmbH

and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or

economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in

this document.

● German Light Products GmbH (GLP), Industriestrasse 2, 76307 Karlsbad, Germany

Service & Support EMEA Tel. (Germany): +49 7248 9271955 support@glp.de www.glp.de – – –

● Service & Support USA Tel. (USA): +1 818 767 8899 info@germanlightproducts.com – – –

www.germanlightproducts.com

Product specificaties

Merk:	GLP
Categorie:	Niet gecategoriseerd
Model:	iQ.Tool Pro

Heb je hulp nodig?

Als je hulp nodig hebt met GLP iQ.Tool Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd GLP

GLP impression Laser Handleiding

20 Februari 2025

GLP Santinel Handleiding

20 Februari 2025

GLP iQ.Tool Pro Handleiding

20 Februari 2025

GLP iQ.Tool Handleiding

20 Februari 2025

GLP impression X1 Handleiding

20 Februari 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Stiebel Eltron FES Komfort Handleiding

21 Maart 2025

Concept SD4010 Handleiding

21 Maart 2025

Zipper ZI-WKS165 Handleiding

21 Maart 2025

RAM Mounts RAM-HS2U Handleiding

21 Maart 2025

KJB Security Products DD3150 Handleiding

21 Maart 2025

Meopta MeoSport R 3-15x50 SFP 4C RD Handleiding

21 Maart 2025

Electrolux EW7W4602QT Handleiding

21 Maart 2025

Electrolux EW8FG5602CDT Handleiding

21 Maart 2025

Electrolux EW8F7417QT Handleiding

21 Maart 2025

Electrolux EW8D795MCT Handleiding

21 Maart 2025